向家坝水电站施工组织设计简介

向家坝水电站为装机６０００ＭＷ的巨型电站，其施工组织设计，结合工程总体布置，选用两期导流，一期先围左岸，二期围右岸的施工程序。一期由右侧的主河床泄流、通航及漂木，二期由导流底孔和缺口泄流，临时船闸通航，散漂木材在坝址上游收漂后陆路转运。大坝混凝土采用塔带机配缆机浇筑。电站第一批机组发电工期为７年，总工期为９年６个月。     

Heat extraction efficiency of a concentric glass tubular evacuated collector

The results of detailed measurements and calculations of the properties of Sydney University/Nitto Kohki evacuated collector tubes have been used to develop a formula for the instantaneous heat extraction efficiency η of a collector panel incorporating the evacuated tubes. The instantaneous efficiency depends on ambient temperature, mean fluid temperature in the collector, solar flux and the design of the manifold used to extract heat from the glass absorber tubes. Manifold design determines the mean temperature difference between absorber tube surface and mean fluid temperature for given operating conditions, and strongly affects the efficiency η of a collector panel. Neither changes in the number of evacuated tubes per unit area of collector, nor variations in solar flux, significantly alter the efficiency decrement Δ η₀ associated with a particular manifold design. Calculated efficiencies agree well with experimental results for collector panels incorporating manifolds of various designs. The formula for efficiency η allows detailed analysis of the relative importance of various energy loss mechanisms in a collector.     

GaAs亚微米自对准工艺技术研究

总结了在５０ｍｍＧａＡｓ圆片上实现自对准介质膜隔离等平面工艺技术的研究，着重描述了离子注入、自对准亚微米难熔栅制备、钝化介质膜生长、干法刻蚀、电阻和电容制备等关键工艺的研究结果。这套工艺的均匀性、重复性好，在５０ｍｍＧａＡｓ圆片上获得了满意的成品率。采用这套工艺已成功地研制出多种性能良好的ＧａＡｓＩＣ和ＧａＡｓ功率ＭＥＳＦＥＴ，证明国家自然科学基金委员会这一重大课题的选择对发展我国ＧａＡｓＩＣ确实具有重大意义。     

从江苏苏南数字微波线路看广播电视专用网发展前景

新建微波干线电路采用高质量的数字微波设备是广电部科技工作会议的精神之一。本文介绍了江苏苏南数字微波线路，并从方案确定、技术实现、设备选型等方面进行分析比较，从而得到一个合理的整体方案。本文还着重阐述了数字传输的关键设备－编码器的现状与发展趋势，提出广播电视专用网多功能应用的设想。     

Finite element micromechanical modelling of unidirectional fibre-reinforced metal-matrix composites

Typical finite element formulations and models for unidirectional composite materials are reviewed. The application of micromechanical finite element analysis to the modelling of unidirectional fibre-reinforced metal-matrix composites is demonstrated by presenting some studies from recent publications. It is shown that while analytical models offer a simple tool for obtaining the overall response of composites, finite element analysis provides more accurate and detailed characterisation of composite properties for complicated geometries and constituent property variations. Various effects that influence the stress/strain response and fibre/matrix deformation of composites are studied through modelling. These effects include the fibre coating and reaction layer, fibre shape and distribution, metallurgical and environmental factors, stress distributions and damage. It is demonstrated that the properties and constituent phase interaction of metal-matrix composites are best modelled by finite element analysis. It is emphasized that in order to obtain good predictions, the models must be coupled with first-hand characterisations of the constituent phases and their interactions, including the thermal history of the specimens.     

K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

宝钢钢管IPSEN炉炉温调节仪表的改造

在宝钢钢管调质炉(IPSEN炉)控制系统的改造中,用西门子S7-400的PID功能软件模块改造原模拟调节器,以实现加热调质温度控制.介绍了用S7-400的PID控制模块构成淬火炉、淬火油槽、回火炉温度控制的方法,并由此提出对宝钢钢管生产中其它加热炉控制系统改造的选择方案.     

章江水闸安全论证

结合江西赣州章江水闸安全鉴定工作,阐明了水闸安全鉴定基本内容和方法,并参照有关规范和标准作出了安全分析评价.     

The cyclotron autoresonance maser with a large-orbit electron ring in a dielectric-loaded waveguide

The cyclotron autoresonace maser with a large-orbit electron ring in a dielectric-loaded waveguide has been analyzed. The stability properties are investigated self-consistently on the basis of the linearized Vlasov-Maxwell equations. The numerical results show the growth rate increases when the electron rotating ratio increases. And the dielectric liner can greatly reduce the energy of the electron beam.     

硼酸使掺铁铝酸锂发光增强的现象

在硼酸存在下合成了掺铁铝酸锂荧光体,研究了在不同温度下硼酸加入量对荧光体发光强度的影响,并通过X射线粉末衍射和粒度分析,初步探讨了发光增加的原因。