液相对流对固液界面稳定性的影响

以模型合金丁二腈－乙醇的强制性晶体生长为基础，利用自行研制的液相对流驱动装置，详细考查了液相自然对流及强迫对流作用下，模型合金平界面失稳的动态生长过程，证实了液相的流动加快了液相温度与浓度分布的均匀化，从而增强了液／固界面的稳定性。并且随流动速度的增加，界面稳定性提高。     

注水站微机数据采集与控制系统

用工控机组成了油田注水站数据采集系统．给出了系统的组成及测量方法，并讨论了系统的可靠性等问题．     

卫星包装箱的随机隔振优化分析

用钢丝绳隔振器将卫星包装箱支承在运输车上,将卫星与车辆简化为二自由度体系,优化分析了在随机路面上行驶时使包装箱响应最小之隔振参数,对实测得到的钢丝绳减振器的非线性迟滞性能作了描述,提出了统计线性化分析的方法。     

热塑性聚氨酯增韧改性聚甲醛的研究

本文对ＰＯＭ／ＴＰＰＵ／Ｚ－３共混体系进行了研究，结果表明，增容剂Ｚ－３可控制共混体系中分散相的颗粒尺寸及分布，起着聚集剂的作用。随着ＴＰＰＵ用量的增加，共混合金的结晶度和拉伸强度增降低，缺口冲击强度出现峰值，ＭＩ下降，当ＰＯＭ／ＴＰＰＵ／Ｚ－３＝１００／７／０．４９时，共混合金的缺口冲击强度达到最大值。     

50kg／m钢轨轨底缺陷的检验和分析

钢轨轨底缺陷有三种：底伤、结疤和底裂缺陷。取２０根有底缺陷５０ｋｇ／ｍＵ７１Ｍｎ钢轨做试样，通过低倍、断口、金相检验和扫描电能谱分析，详细描述了轨底缺陷的宏观和微观特征，研究出钢轨轨底缺陷出现的规律臁其产生的原因。通过对比试验，发现淄博１号保护渣有利于改善钢锭表面质量，提高钢轨一级品率。     

Novel polymeric aromatic lithium sulfonylimides as salts for polymer electrolytes

Three new polymeric aromatic lithium sulfonylimides were used as salts in high molecular weight poly(ethylene oxide) (PEO) electrolytes. Their conductivity and electrochemical stability behaviors were investigated. The electrolytes with lithium poly[4,4′‐(hexafluoroisopropylidene)diphenoxy]sulfonylimide (LiPHFIPSI) showed a better conductive performance compared with the other two lithium salts. The best conductivity was obtained for PEO/LiPHFIPSI EO/Li = 16 (1.90 × 10^?4 S/cm at 60°C). Thermal analysis indicated that the salts effectively decreased the crystallinity of PEO. Moreover, the electrolytes also had good electrochemical stability and their oxidative potential was to 5.5 V versus Li/Li⁺. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1802–1805, 2002     

Stabilization of SnO2 ultrafine particles by additives

In order to stabilize ultrafine particles of SnO₂ which is essential to obtain high gas sensitivity, a systematic investigation was undertaken regarding the stabilizing effects of 5 at% impregnated foreign additives, consisting of oxides or polyoxy compounds of 31 metals and 3 non-metals. The data of specific surface area, SA, as well as SnO₂ crystallite size, D, evaluated from X-ray diffraction showed that the additives could be classified into several groups according to the effectiveness. The most effective group, consisting of P-Ba, Sm, Ba, P, Mo, W, Ca, Sr, Cr and In, could keepD less than 10 nm even after calcination at 900°C, whereas pure SnO₂ underwent grain growth to haveD of 13 and 27 nm at 600 and 900°C, respectively. Electron microscopy revealed that neck sizes, X, between crystallites were fairly proportional toD(X/D = 0.80). A simple analysis of SA and D data based on a monosized sphere model suggested that each crystallite was coordinated with 3–4.5 neighbours through the necks. The existing state and stabilizing mechanism of additives are discussed in conjunction with the electrical resistance of porously sintered elements.     

超声跟踪法制作误差对器件性能的影响及补偿

研究发现快模入射超声跟踪氧化碲器件的布喇格损耗频响对于参数误差十分敏感,因而制作误差可能对器件性能有较大影响。本文系统研究了这种影响及其补偿方法,结果表明,当相邻两换能片之间中心距S有5%的误差和声偏置角丫_0有10%的误差时,通过调整入射角θ_1可作出完全的补偿。     

合成镁白云石砂的研制与应用

选用优质轻烧白云石、轻烧菱镁石为原料,经干法消化、高温煅烧,制得杂质含量2.66％、体密>3.28g/cm~3的合成镁白云石砂。用合成镁白云石砂制得CaO MgO>97％,总杂质含量2.11％的高纯合成镁白云石砖,在太原钢铁公司AOD炉第一次试用,最高炉令达36炉次。     

2－重自补图论（Ⅲ）──计数理论

文中解决了２－重自补图的计数问题，获得了具有ｐ个顶点的２－重自补图的数目是其中Ｚ（Ａ）表示置换群Ａ的圈指标，Ｓ￣（２）＿ｐ表示ｐ次对称群的对群．