Thermoreversible behavior of κ-carrageenan and its apatite-forming ability in simulated body fluid

Osteoconductive materials with self-setting ability have received much attention because their properties allow developing injectable materials for bone defects. Thermosensitive hydrogel with ability of bone-like apatite formation in a body environment is a candidate of injectable bone fillers with osteoconductivity because the apatite formation on materials is an essential to show osteoconduction. The present study focused on the development of a thermosensitive hydrogel through modifications of the sulphonic groups of the polysaccharide, κ-carrageenan, with potassium chloride (KCl) and calcium chloride (CaCl₂). We found that the gelation temperature of κ-carrageenan solutions increased with increasing amounts of K⁺ ions. Apatite formation was observed on the gel after exposure to simulated body fluid for 0.5 day when the gel was prepared with a molar ratio of Ca²⁺/sulfonic groups = 1.5. These results indicate that a thermosensitive κ-carrageenan hydrogel with apatite-forming ability was obtained through the incorporation of K⁺ and Ca²⁺ ions into the solution.     

Performance of a solid oxide fuel cell couple operated via in situ catalytic partial oxidation of n-butane

The operation of a pair of anode-to-anode-facing solid oxide fuel cells (SOFCs) via in situ catalytic partial oxidation (CPO) of n-butane was investigated. In this simple “no-chamber” setup, butane is partially oxidized by heterogeneous reactions inside the porous anodes, providing processed fuel and the heat required for SOFC operation. The cell couple yielded a power density of up to 270 mW cm⁻², and the maximum total power obtained was 1.2 W with cell sizes of 13 mm × 23 mm. The maximum electrical efficiency was 1.3%. High CO concentrations of up to 1000 ppm were detected in the exhaust gas, indicating that the cell couple could not efficiently consume the complete provided fuel. A flame, lit at the exhaust, minimized the carbon monoxide level while having insignificant influence on the cell performance. Thermal insulation of the cell couple improved the output remarkably, showing the strong influence of temperature on cell performance. The two cells had a distance of only 2 mm, suggesting a potential for high volumetric power densities in multi-cell configurations for a self-sustained combined heat and power system.     

Suppression of natural convection heat transfer along a vertical flat plate with concavities

To clarify the effect of the suppression of natural heat transfer, the local heat transfer coefficients on a vertical cooled flat plate with circular grooves were measured by a multi‐type thermocouple method. Two flat plates with and without periodic circular grooves were tested in this experiment. The characteristics of heat transfer along the plate for both plates were compared. The local heat transfer coefficients on the periodic grooved plate became smaller than that of the flat plate. The flow pattern was changed when it passed over the grooves, and circulation was generated in the grooves in the downstream. As a result, the thickness of the thermal boundary layer on the grooved plate was more developed than the normal flat plate. © 2010 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20294     

Experimental study on latent heat storage characteristics of W/O emulsion -Supercooling rate of dispersed water drops by direct contact heat exchange-

Recently, much attention has been paid to investigate the latent heat storage system. Using of ice heat storage system brings an equalization of electric power demand, because it will solved the electric -power-demand-concentration on day-time of summer by the air conditioning. The flowable latent heat storage material, Oil/Water type emulsion, microencapsulated latent heat material-water mixture or ice slurry, etc., is enable to transport the latent heat in a pipe. The flowable latent heat storage material can realize the pipe size reduction and system efficiency improvement. Supercooling phenomenon of the dispersed latent heat storage material in continuous phase brings the obstruction of latent heat storage. The latent heat storage rates of dispersed water drops in W/O (Water/Oil) emulsion are investigated experimentally in this study. The water drops in emulsion has the diameter within 3 ～ 25μm, the averaged water drop diameter is 7.3μm and the standard deviation is 2.9μm. The direct contact heat exchange method is chosen as the phase change rate evaluation of water drops in W/O emulsion. The supercooled temperature and the cooling rate are set as parameters of this study. The evaluation is performed by comparison between the results of this study and the past research. The obtained experimental result is shown that the 35K or more degree from melting point brings 100% latent heat storage rate of W/O emulsion. It was clarified that the supercooling rate of dispersed water particles in emulsion shows the larger value than that of the bulk water.     

Characterization of a mixed sphere and film waveguide at the 1-microm scale by 0.67-microm laser light propagation

A mixed sphere array and film (MSF) waveguide [a mixed system with a polystyrene microsphere array and a poly(methyl methacrytate) thin film waveguide] was fabricated and characterized at a wavelength of 0.67 microm. The attenuation coefficients of the isolated linear thin-film waveguide and the isolated linear microsphere array were measured to be 0.54 dB/microm and 0.98 dB/sphere, respectively. In the MSF waveguide the attenuation coefficients of the thin-film waveguide and the polystyrene microsphere array were 0.61 dB/microm and 1.17 dB/sphere, respectively. A curvilinear MSF waveguide was also fabricated and characterized. Evanescent wave interaction between the thin-film waveguide and the microsphere array was expected.     

Mapping and control of atomic force on Si(1 1 1)square root(3) x square root(3)-Ag surface using noncontact atomic force microscope

We demonstrated the possibility of measuring the three-dimensional force-related map with true atomic resolution between an Si tip and Si(1 1 1)square root(3) x square root(3)-Ag sample surface by measuring the tip-sample distance dependence of noncontact atomic force microscope (NC-AFM) image, i.e. atomically resolved atomic force spectroscopy. Furthermore, we demonstrated the possibility of controlling the interaction force between the atom on the tip apex and a sample atom of Si(1 1 1)square root(3) x square root(3)-Ag surface on an atomic scale by placing an Ag atom on the Si tip apex instead of Si atom.     

In-Situ Characterization of SiC–AlN multiphase ceramics

AlN and SiC can react and form a solid solution at temperatures above 1800 °C, a result that may be beneficial for sintering silicon carbide ceramics. The pressureless sintered AlN–SiC multiphase ceramics have reached high density at a temperature of 2100 °C for 1 hr in Ar. Analytical scanning transmission electron microscopy was then used to determine the grain boundary, fracture surface, and the local compositions. Because AlN has a higher solid vaporization pressure than SiC, the vaporization rate of the AlN solid would far exceed that of SiC at a sintering temperature. The vaporizing AlN was deposited on the surface of SiC powder; SiC grains then elongated in a random arrangement. The form of elongated rod crystals of 4H SiC is 5 to 8 m in length and 1 m in width. It resulted in the sample fracture section producing pulling-out and a strong tearing-open effect. The bending strength and the fracture toughness of the material obtained are 420 MPa and 4.40 MPa × m^1/2, respectively.     

A smooth impact rotation motor using a multi-layered torsional piezoelectric actuator

A smooth impact rotation motor was fabricated and successfully operated using a torsional piezo actuator. Yoshida et al. reported a linear type smooth impact motor in 1997. This linear motor demonstrated a high output force and a long stroke. A superior feature of the smooth impact drive is a high positioning resolution compared with an impact drive. The positioning resolution of SIDM (smooth impact drive mechanism) is equal to the piezo displacement. The reported positioning resolution of the linear type was 5 nm. Our rotation motor utilized a torsional actuator containing multi-layered piezoelectric material. The torsional actuator was cylindrical in shape with an outer diameter of 15 mm, an inner diameter of 10 mm, and a length of 11 mm. Torsional vibration performance was measured with a laser Doppler vibrometer. The obtained torsional displacement agreed with the calculated values and was sufficient to drive a rotor. The rotor was operated with a saw-shaped input voltage (180 V; 8 kHz). The revolution direction was reversible. The maximum revolution speed was 27 rpm, and the maximum output torque was 56 gfcm. In general, smooth-impact drives do not show high efficiency; however, the level of efficiency of our results (max., 0.045%) could be increased by improving the contact surface material. In addition, we are studying quantitative consideration, for example, about the optimum pre-load or frictional force.     

Serological survey of antibody to Neospora caninum in Japanese dogs

Prevalence of antibody to Neospora caninum (NC) in Japanese dogs were examined. The antibody was positive in 15 of 48 dogs (31.3%) reared in the dairy farms that had case of the abortions due to NC infection or had the cattle seropositive to NC, whereas the prevalence was 7.1% (14 of 198 dogs) among the dogs kept in urban areas. In one dog breeder, all 17 Shetland sheepdogs older than 7 months were seropositive, and one pup was diagnosed as neosporosis 2 months before the first serological examination. The antibody titers of the dogs kept at this breeder were almost unchanged for 1.5 years. Serological evidence of the dogs in the dairy farms and urban areas indicates the transmission of NC between dogs and cattle. Also serological results of the dogs in one breeder may suggest the potential horizontal transmission among dogs.