Heat extraction characteristics by coaxial heat exchanger

This study was performed to investigate the heat extraction characteristics from shallow geothermal resources using a coaxial heat exchanger. First, a computer simulation program for a coaxial heat exchanger was checked and verified by laboratory experiments. After inspecting the effectiveness of the computer program described herein, a numerical simulation for a real scale model was conducted under the condition that the heat transfer mechanism in the stratum was heat conduction. Unsteady heat extraction characteristics are presented herein, and the effects of the tube material, inner diameter, and circular modes on the heat extraction rate are discussed. From the computer results it was found that the heat extraction performance using a coaxial heat exchanger greatly depended on the factors mentioned above in the range of the parameters covered in this study. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 496–513, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20083     

In Situ Observation of Deformation in Semi-solid Fe-C Alloys at High Shear Rate

Synchrotron X-ray radiography at 125 frames per second was used to study deformation mechanisms in semi-solid Fe-C alloys at high solid fraction and shear strain rates of 10^?1/s. An image correlation approach was also used to quantify the shear strain fields and study shear-induced dilation and the origin of shear cracking. It was shown that, at high solid fraction (90 to 93 pct solid), rearrangement including rotation and translation of solid particles became restricted and shear strain localized into narrow liquid-filled channels/fissures. Shear cracking was shown to originate from inadequate liquid flow into the expanding spaces between solid particles caused by shear-induced dilation. At lower solid fraction (~85 pct solid), solid particles rearranged with a significantly higher component of rotation leading to more shear-induced dilation and a wider shear band.     

Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry     

Chemical compositions,fine structure and physicochemical properties of kudzu (Pueraria lobata) starches from different regions

Three commercial kudzu starches from Vietnam, Japan and Korea were used to determine chemical compositions, isoflavone compounds, fine structure and physicochemical properties. The kudzu starch from Vietnam had polygonal granules, whereas the kudzu starches from Japan and Korea contained both polygonal and spherical granules. Total protein, lipid, ash and phosphorus contents present in these kudzu starches were less than 1% (starch basis). The kudzu starch from Vietnam and Korea contained both daidzein and daidzin, whereas the kudzu starch from Japan had only daidzein. These starches had similar actual amylose contents (22.2–22.9%). However, λ_max, blue value and apparent amylose contents of the kudzu starch from Vietnam were lower than those from Japan and Korea. Amylose molecules of the kudzu starch from Vietnam had the largest average degree of polymerization (DP_n) and number of chains (NC), followed by the kudzu starches from Japan and Korea. Amylopectin molecules of the kudzu starch from Vietnam also had the largest DP_n and NC, followed by the kudzu starches from Korea and Japan. X-ray diffraction patterns of the kudzu starches from Vietnam, Japan and Korea were A-type, C-type and B-type, respectively. The kudzu starch from Vietnam was found to have the specific characteristics such as significantly high gelatinization temperature, transition enthalpy and degree of crystallinity as compared to the kudzu starch from Korea and Japan.     

Serologic evidence that streptococcal superantigens are not involved in the pathogenesis of Kawasaki disease

We retrospectively reviewed 11 patients with culture-proven Acanthamoeba keratitis who presented at the National Taiwan University Hospital between 1989 and 1996. We assessed predisposing factors, initial diagnosis, clinical presentation, treatment, and outcome. A history of contact lens-wear, poor contact lens hygiene, intractable eye pain, and ring infiltrates in the cornea were the most prominent characteristics and clinical manifestations. Acanthamoeba keratitis was often misdiagnosed, with herpetic keratitis (7/11) being the most common initial diagnosis from referring hospitals. These patients were usually treated on the basis of the inaccurate diagnosis for more than 1 month (range 1-8 mo) before referral. All patients ultimately received penetrating keratoplasty because of poor response to delayed medical treatment. We suggest that inadequate contact lens hygiene may be important in Acanthamoeba keratitis. This condition is often misdiagnosed and, as early diagnosis is a major factor for successful medical treatment in such patients, awareness in clinical practice is critical.     

Experimental study of the flow in helical circular pipes: Torsion effect on the flow velocity and turbulence

An objective of the present paper is to experimentally clarify the torsion effect on the flow in helical circular pipes. We have made six helical circular pipes having different pitches and common non-dimensional curvature δ of about 0.1. The torsion parameter β0, which is defined by β0 = τ/（2δ）1/2 with non-dimensional torsion r, are taken to be 0.02, 0.45, 0.69, 1.01, 1.38 and 1.89 covering from small to very large pitch. The velocity distributions and the turbulence of the flow are measured using an X-type hot-wire anemometer in the range of the Reynolds number from 200 to 20000. The results obtained are summarized as follows： The mean secondary flow pattern in a cross section of the pipe changes from an ordinary twin-vortex type as is seen in a curved pipe without torsion （toroidal pipe） to a single vortex type after one of the twin-vortex gradually disappears as β0 increases. The circulation direction of the single vortex is the same as the direction of torsion of the pipe. The mean velocity distribution of the axial flow is similar to that of the toroidal pipe at small β0, but changes its shape as β0 increases, and attains the shape similar to that in a straight circular pipe when ,β0 = 1.89. It is also found that the critical Reynolds number, at which the flow shows a marginal behavior to turbulence, decreases as ,β0 increases for small ,β0, and then increases after taking a minimum at ,β0 ≈ 1.4 as ,β0 increases. The minimum of the critical Reynolds number experimentally obtained is about 400 at ,β0 ≈ 1.4.     

Theoretical analysis of atomic-scale friction in frictional-force microscopy

We perform a theoretical analysis of frictional-force microscopy(FFM) images of a cleaved graphite surface. The Tomlinson model with a single-atom tip is powerful for reproducing experimental FFM images. A mapping relation between the tip atom position and the cantilever basal position obtained by a stable equilibrium condition, gives a clear explanation of the physical meaning of FFM image patterns. This revised version was published online in June 2006 with corrections to the Cover Date.     

Novel Video Memory Reduces 45% of Bitline Power Using Majority Logic and Data-Bit Reordering

We propose a low-power two-port SRAM for real-time video processing that exploits statistical similarity in images. To minimize the discharge power on a read bitline, a majority-logic circuit decides if input data should be inverted in a write cycle, so that ldquo1rdquos are in the majority. In addition, for further power reduction, write-in data are reordered into digit groups from the most significant bit group to the least significant bit group. The measurement result of a 68-kbit video memory in a 90-nm process demonstrates that a 45% power saving is achieved on the read bitline. The speed and area overheads are 4% and 7%, respectively.