Development of mechanical properties of structural high-carbon low-alloy steels through modified heat treatment

The modified heat treatment, which produces a mixed structure of martensite and lower bainite through short-term isothermal transformation at just above the martensitic transformation temperature,M _s temperature, followed by oil quenching (after conventional austenitization), has been applied to three high-carbon low-alloy steels with different levels of nickel and chromium contents at similar molybdenum levels, in which carbon was allowed to replace relatively expensive additions of nickel and chromium, for their ultra-high strength application. The significant conclusions are as follows: an ultra-high strength steel of 1900 M Pa yieldstress grade with a high toughness level can be obtained when about 60 vol % lower bainite is associated with 473 K tempered martensite of 0.60% C-1.80% Ni-0.80% Cr-0.25% Mo steel. If approximately 25 vol % lower bainite appears in 673 K tempered martensite of the steel, a 1700 M Pa yield-stress grade steel with high toughness and moderate ductility levels can be attained. However, alloying nickel is essential to some extent for development of the mechanical properties with the modified heat treatment suggested in the present work.     

Isolated Schwann cells can synthesize the basement membrane in vivo

The purpose of the present study is to examine whether isolated Schwann cells that are not in contact with axons can synthesize the basement membrane in vivo. Schwann cells obtained from sciatic nerve of neonate Wistar rats were prepared in culture, harvested, and mixed with collagen matrix. The silicone tube filled with the collagen matrix containing Schwann cells was closed by a Millipore membrane at both ends to isolate the interior from the outer environment and was implanted in a gap between proximal and distal stumps of transected sciatic nerve of an adult Wistar rat. Ten days later, the implanted silicone tube was prepared for electron microscopic observations. Schwann cells in the tube were elongated longitudinally and lined up parallel to the proximo-distal direction. No regenerating axons penetrated the Millipore membrane into the tube. The basement membrane showing almost normal structure was produced on the surface of the Schwann cells. While the silicone tube was placed side by side to the intact sciatic nerve, Schwann cells in the tube were scattered and no basement membrane was observed. These results suggest that some humoral factors might be released from the transected nerve stumps, which may be responsible for the regular arrangement and the basement membrane formation by Schwann cells without any contact with axons.     

Nanoparticle formation in H2O/N2 and H2O/Ar mixtures under irradiation by 20 MeV protons and positive corona discharge

To investigate the contribution of ions to gas nucleation, we have performed experiments on the formation of water droplets in H₂O/N₂ and H₂O/Ar gas mixtures by irradiation with a 20 MeV proton beam and by positive corona discharge. The size of the formed nanoparticles was measured using a differential mobility analyzer equipped with a Faraday cup electrometer. Using the proton beam, droplets around 10 nm in diameter were observed for both positively and negatively charged particles, but none were found when the corona discharge was used. This implies the importance of the presence of both positive and negative ions for the formation of nanosize droplets, which attract each other by Coulomb interactions, enhancing the collision frequency and leading to the formation of the 10 nm droplets.     

Effect of Support Materials on the Selective Methanation of CO over Ru Catalysts

Selective methanation of CO in the reformate gas (CO/CO₂/H₂/H₂O = 0.175/17.9/70.9/11.1) proceeded over Ru catalysts supported on metal oxides and zeolites. CO was selectively methanated at wide temperature ranges (200–275 °C) over Ru/γ-Al₂O₃, Ru/TiO₂ Ru/H-Y and Ru/H-beta catalysts. Higher Ru contents in Ru/γ-Al₂O₃ improved the selective CO methanation rate.     

Impact of fertilizer on a small watershed of Lake Biwa: use of sulfur and strontium isotopes in environmental diagnosis

Sulfur and strontium isotopes (delta(34)S and (87)Sr/(86)Sr) were determined in 39 river water samples collected over three different cultivation periods (April, May, and June), and in several materials used for comparison (fertilizers, detergents, soils, irrigation and agricultural waters), to evaluate the impact of fertilizers on a small agricultural watershed of Lake Biwa, in central Japan. delta(34)S values in river water decreased (from +5.8 to -2.0 per thousand) with increasing SO(4) concentrations (3.8 to 93.2 ppm) from upstream to downstream of the watershed. Comparison of river water S isotopes with those of possible source materials indicates that the enrichment of SO(4) can be attributed to the dissolution of two kinds of fertilizers: (1) compound fertilizers commonly used in this area and (2) ammonium sulfate which is applied on a small scale. In contrast, (87)Sr/(86)Sr values of river water decreased with time from April (avg. 0.71163), through May (avg. 0.71139), to June (avg. 0.71127). The tendency of the sample plots on the (87)Sr/(86)Sr vs. 1/Sr diagram suggests a time-dependent increase in the contribution of soil water to the river, which is partly affected by the Sr-bearing fertilizers. It is suggested that a maximum of 25% of dissolved Sr is derived from these fertilizers, while more than 75% of it is of rock origin. Mass balance calculations permitted us to evaluate the proportion of fertilizer contribution in each river. Combined use of S and Sr isotopes together with concentration data could be a new environmental diagnosis technique for rivers and soils in localized watersheds.     

The effects of di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) administration on human intestinal microbiota

Di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) was shown to enhance Ca absorption in rat and human intestine. The effects of DFA III administration (9 g per day for 4 weeks that corresponded to 3-fold the optimal dosage of DFA III) on human intestinal microbiota were studied using denaturing gradient gel electrophoresis (DGGE). The major groups of human intestinal microbiota reported previously: the Bacteroides, the Clostridium coccoides group (Clostridium cluster XIVa), the Clostridium leptum group (Clostridium cluster IV), and the Bifidobacterium group were detected. The similarity of 30 DGGE profiles based on the V3 region (before and after administration to the 15 subjects) of the 16S rDNA were calculated using Pearson's correlation based on numbers, positions and intensity of bands, and then a dendrogram of DGGE profiles was constructed by the unweighted pair group method using arithmetic average (UPGMA) clustering method. By these analyses, no difference in DGGE profiles after DFA III administration was observed in healthy subjects, while two subjects with chronic constipation showed different profiles, namely on numbers, positions and the intensity of some bands. Their stools were softer and stool frequencies increased and they obtained relief from constipation.     

Geothermal resources of Hachijojima

Hachijojima is a gourd-shaped volcanic island in the Pacific Ocean. Nishiyama and Higashiyama volcanoes consist of basalt lava and associated pyroclastic rocks. A promising geothermal resource was found in south Higashiyama, associated with an uplift of Tertiary rocks consisting of mainly andesite lava and related pyroclastic rocks, overlain by Quaternary volcanic rocks. Steep high-temperature (over 250°C) and high-pressure gradients occur in the deeper portion of the system near the Tertiary–Quaternary contact, indicating the presence of a cap rock. The cap rock formed by deposition of hydrothermal minerals. Geothermal fluid ascends from the deeper portions to shallow depths along vertical fractures through the cap rock. These vertical fractures form the geothermal reservoir in the Tertiary formation. Three wells were drilled into these vertical fractures, and approximately 30 t/h of superheated steam was obtained from each well during flow tests. The geothermal fluid is mainly a mixture of seawater and meteoric water in an approximate ratio of 1 to 2, based on chemical analyses, with a portion of volcanic gas included. At present a 3.3 MW_e, geothermal power plant is being constructed here.     

The influence of dopant species on thermal stability of NiSi film

We investigated the relationship between thermal stability of NiSi films and the implanted dopant species on Si substrates. The most stable NiSi layer appeared on Boron-implanted Si substrate, where the formation of pseudo-epitaxial transrotational structure was observed, just in case that the dose of boron is more than 5e15 atoms/cm². This unique crystallographic orientation of NiSi film on Boron-implanted substrate is a key role of thermal stability because thermal stress at grain boundary can be diminished by peculiar arrangement of transrotational domains, owing to the anisotropy in coefficient of thermal expansion (CTE) of NiSi.     

Kinetics of solid acid catalyzed 1-octene reactions with TiO2 in sub- and supercritical water

Acid catalyzed reactions of 1-octene on TiO₂ in sub- and supercritical water were investigated (T = 250-450 °C, P = 11-33 MPa). The main products were 2-octene and 2-octanol. Additionally, other liner C₈ alkenes and liner secondary C₈ alcohols were produced as by-products. Through kinetic analysis, acid catalyzed reactions can divide into the reaction catalyzed by Lewis acidic sites on TiO₂ and the reaction catalyzed by protons produced by the dissociation of water molecules. Each type of the reaction is affected by water density or ionic product of water, respectively, therefore, reaction mechanism changes with temperature and pressure. From the contribution of each reaction type, the temperature dependence of cis/trans ratio of produced 2-octene could also be explained.