Visualization and concentration measurement of a direct-injection hydrogen jet in a constant-volume vessel using spark-induced breakdown spectroscopy

In this work, spark-induced breakdown spectroscopy (SIBS) was employed to investigate the mixing process of a hydrogen jet in a constant-volume vessel. The local fuel concentration of the hydrogen jet was measured at several locations, using a SIBS sensor. A high-speed camera was used to visualize spark discharge fluctuations, and hydrogen jet concentration measurements were conducted simultaneously. Spectrally resolved atomic emissions from the plasma generated by the spark plug were examined to determine the local equivalence ratio. Direct visualization of the spark discharge provided useful information about the influence of spark discharge characteristics related to the spark timing. Using the developed SIBS sensor, atomic emission spectra were obtained from hydrogen H_α at 656 nm and nitrogen N (I) at 501 nm. Comparison of the intensity peaks of atomic emissions from hydrogen and nitrogen allows the local hydrogen concentration in a measured volume to be determined, and hence also the local equivalence ratio. The measurement results demonstrate the local variation in the equivalence ratio throughout the jet and along its axis. From the results, the spatial structure of the hydrogen jet affects the hydrogen/nitrogen mixing and could be clarified with SIBS technique when the spark is discharged.     

Inter-comparison of various global sea surface temperature products

In this study, eight global sea surface temperature (SST) products for 2009 are compared to clarify their characteristics. The median of eight daily values, the Ensemble Median as Reference Product (EMRP), is used as a reference product for inter-comparison. The results show that the absolute value of mean differences and the value of root mean square (RMS) differences are higher in single-microwave products such as Advanced Microwave Scanning Radiometer for the Earth observing system (AMSR-E), Tropical Rainfall Measuring Mission Microwave Imager (TMI), and WindSat, than in products such as MicroWave Optimally Interpolated SST (MWOI), Merged satellite and in situ data Global Daily SST (MGD), and Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) constructed by merging several SST data. It is of note that the characteristics of SST products depend on the type of SST used within the product, rather than the data source used. A comparison of SST products was also conducted using EMRP and data observed by moored buoys. The results show that only AMSR-E has a warm bias (+0.06°C) while other products have a cool bias (maximum value ?0.10°C). The RMS error of TMI is the highest (0.57°C), and that of EMRP the lowest (0.28°C). Furthermore, the temporal variability between the data in each SST product was compared to those observed by the Kuroshio Extension Observatory (KEO) buoy. Results show that the temporal variability of EMRP corresponds well to that of buoy data, and that the RMS error of EMRP is lower than that of the other SST products.     

Experimental investigation on optimization of invert trap configuration for sewer solid management

Invert traps have been successfully used to collect sediments at convenient locations within the sewer network, where large volumes of solids can be stored. In the present study, experiments have been performed in 15 cm wide and 5 m long channel for the measurement of retention ratios of five different invert trap configurations (namely, rectangular, trapezoidal with one side vertical, trapezoidal, trapezoidal with rectangular base, rectangular with trapezoidal base) having top width of 32 cm and depth of 28 cm with slots of three different sizes (namely, 5, 9 and 15 cm) for the flow of seven different sediment types (namely, two types of sand, glass beads and four types of plastic beads) at different flow rates for each trap. The flow rates selected in present study cover entire range of flow rate expected in channels during dry weather flow and monsoon. Flow field and retention ratio predictions for each invert trap configuration have been carried out using CFD modeling with the help of FLUENT software using Renormalization Group (RNG) k–ε along with Discrete Phase Model (DPM). The simulation results are capable of showing particle trajectories, the effect of flow rate and trap geometry on the flow patterns, developed within the trap. Based on CFD modeling and experimental measurements, it is concluded that the invert trap having rectangular shape with trapezoidal base is the most efficient trap configuration with highest sediment retention ratio.     

Impact of Serum Chemerin Levels on Liver Functional Reserves and Platelet Counts in Patients with Hepatocellular Carcinoma

Obesity-related metabolic abnormalities, including adipokine imbalance and chronic inflammation, are involved in liver carcinogenesis. Chemerin, a novel adipokine, plays a critical role in adipogenesis, energy metabolism, and inflammation. We evaluated the impact of serum chemerin levels on liver functional reserves in hepatocellular carcinoma (HCC) patients and on the recurrence and prognosis of HCC. This study included 44 patients with any stage of HCC who underwent curative treatment at Gifu Municipal Hospital (Gifu, Japan) between 2006 and 2007. Recurrence-free survival and overall survival were estimated using the Kaplan-Meier method. Serum albumin levels (Pearson’s correlation coefficient; r = 0.3110, p = 0.0399), platelet counts (r = 0.4159, p = 0.0050), and prothrombin times (r = 0.3775, p = 0.0115) were significantly correlated with serum chemerin levels in patients with HCC, and they were inversely correlated with Child-Pugh scores (r = −0.3732, p = 0.0126), serum alanine aminotransferase levels (r = −0.3864, p = 0.0105), and total bilirubin levels (r = −0.4023, p = 0.0068). Among these variables, a multiple comparison test identified that platelet counts and total bilirubin levels were associated with serum chemerin levels (p < 0.0083). No significant correlation was found between serum chemerin levels and recurrence-free survival (p = 0.3691) or overall survival (p = 0.7916). In HCC patients, serum chemerin concentrations were correlated with liver functional reserves and platelet counts, but not with recurrence or prognosis.     

Study on FBR core concepts to increase proliferation resistance of plutonium in LWR–FBR transition period

The possibility to enhance proliferation resistance of discharged plutonium in fast breeder reactor (FBR) has been investigated in terms of reactor core-design aspects. The provisional target for proliferation resistance measures based on Saito's attractiveness (ATTR) is defined. It is found that a few percent of plutonium loading and/or Am/Cm loading, which come from various types of spent fuel, might satisfy the provisional target with a minimum impact on the core neutronic performances. On Am/Cm loading core, decay heat constraints for fuel-handling aspects are found to be important and should be considered in design. There is not significant change on the current developing scenarios for light water reactor–FBR transition period by applying the measures based on Saito's ATTR. It is found that applying Kimura's proposal, 15% ²³⁸Pu content requires about 7% MA loading fraction both in the core and the blanket, and it only can be applied at limited case. The period to consume minor actinides is shorter than to consume plutonium.     

Investigation of Precipitation Behavior in Age-Hardenable Cu-Ti Alloys by an Extraction-Based Approach

We investigated the precipitation processes in Cu-4 mol pct Ti alloy specimens aged at 723 K (450 °C), by means of X-ray diffraction and chemical analyses of the precipitates extracted from the parent alloy specimens. Aging-induced precipitate particles of a spinodally decomposed disorder, α′; those of a metastable order, β′-Cu₄Ti; and those of a stable order, β-Cu₄Ti, were continuously formed in the aged specimens. The extraction of the precipitate particles from the aged specimens by submergence in a nitric solution allowed for not only the structural analyses of the constituent precipitate phases but also the quantitative evaluation of their chemical compositions and volume fractions. Early during the aging process, the supersaturated Cu solid solution decomposes spinodally in a continuous manner, and an unstable disorder, α′, appears. Then, fine needle-shaped β′-Cu₄Ti particles, which have a Ti content of approximately 37.5 mol pct, form in the Cu matrix. During prolonged aging, coarse cellular components composed of the terminal Cu solid solution and stable β-Cu₄Ti particles which have a Ti content of 20.5 mol pct nucleate and grow, primarily in the grain boundaries, at the expense of the metastable β′-Cu₄Ti particles. The volume fraction of the β′-Cu₄Ti particles in the alloy reaches a maximum of approximately 1.7 pct after aging for 24 hours, while that of the β-Cu₄Ti particles increases steadily to more than 18 pct after 480 hours. The volume fraction of the fine β′-Cu₄Ti particles in the alloy specimens remained constant throughout the age-hardening, indicating that the hardening is primarily owing to the fine dispersion of the β′-Cu₄Ti particles and not because of the large volume fraction of coarse β-Cu₄Ti particles.     

Robust and accurate prediction of thermal error of machining centers under operations with cutting fluid supply

A novel temperature measuring system named LATSIS was proposed to realize a robust and accurate prediction of the thermal deformation of machining centers, even under external disturbances such as cutting fluid supply. LATSIS enables a drastic increase in the number of sensors employed for measuring the temperature of the machine tool. Thus, the entire temperature distribution can be obtained by interpolating the measured temperature 3-dimensionally without calculating the heat conduction. A set of experiments was conducted in which the LATSIS was employed to predict the TCP error. A total of 284 sensors were placed on the machining center, and the TCP error was predicted based on the measured temperature for the situation with/without the cutting fluid supply. The results of the prediction showed good agreement with the measured TCP error even during the initial transient temperature change as well as in the cooling phase after the machine halt. The TCP error with the cutting fluid supply is accurately predicted. LATSIS was proven to be a robust and accurate method for predicting the thermal deformation of machine tools, and is a promising technology for future manufacturing systems.