Spectral hole burning and carrier-heating effect on the transientoptical nonlinearity of highly carrier-injected semiconductors

An improved density-matrix theory is developed that can treat both spectral hole burning and carrier heating self consistently. Various intraband and interband relaxation terms characterized by different relaxation times and quasi-equilibrium distributions are introduced into the density-matrix equations within a relaxation-time approximation. Conservation of total number and energy densities of carrier systems in each band is considered to determine the quasi-equilibrium distributions. Formalism is applied to the calculation of the transient optical nonlinearity of highly carrier-injected semiconductors. Spectral hole burning and carrier-heating effects on the spectral and temporal characteristics are then clarified. In particular, the significant four-wave-mixing effect due to carrier heating is pointed out. An experiment that can be used to directly prove the existence of the carrier-heating effects on gain nonlinearity is also proposed     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

Efficient synthesis and magnetic properties of triphenylamine bearing three nitronylnitroxide radicals

Improved synthesis and reinvestigation of the magnetic properties of triphenylamine bearing three nitronylnitroxide radicals (1) were carried out. Single crystal X-ray crystallographic analysis of 1 established that its molecular shape had a C₃-symmetry. Our newly prepared 1 showed different physical properties from those of reported. SQUID measurements of 1 showed that each of the three spins of 1 behaved independently at room temperature. In contrast, the three spins coupled antiferromagnetically at lower temperature as low as ca. 1.8 K. These spin behaviors can be explained by a regular triangular antiferromagnetic model (J/k_B = ?3.3 K) and interpreted as a spin frustration system.     

A new strain hardening model for rate-dependent crystal plasticity

This paper presents a crystal plasticity based finite element analysis employing the new microstructure-based strain hardening model recently presented by Saimoto and Van Houtte (2011) [7] to simulate formability and texture evolution in the commercial aluminum alloy 5754. Simulations are performed to compare the predictive capability of the new hardening model against the common work hardening models using a rate-dependent plasticity formulation. The parameters in the numerical models are calibrated using the X-ray data published by Iadicola et al. (2008) [9] for the aluminum sheet alloy 5754. The predictions of the model for balanced biaxial tension and in-plane plane-strain tests are compared against experimental observations presented in Iadicola et al. (2008) [9]. It is concluded that the new model provides the best predictions of the large strain behavior of Aluminum sheet alloy 5754 subjected to various strain paths.     

Reactive and non-reactive transport modelling in partially water saturated argillaceous porous media around the ventilation experiment, Mont Terri

At Mont Terri Underground Research Laboratory (URL) Switzerland, a specific experiment has been performed in a tunnel, in order to investigate the hydro-mechano-chemical (HMC) perturbations induced in the argillaceous formation by forced ventilation. This experiment has been selected in the international project DECOVALEX to be used for process model development and validation. The numerical simulation of the geochemical response to the ventilation experiment (VE) is the object of the present paper, focusing on the transport of chloride as a conservative species and sulphate as a reactive species. Utilising the validated hydro-mechanical (HM) results from earlier steps of the DECOVALEX task, reactive and non-reactive transport models, incorporating the current understanding of the geochemistry at the site, were successfully constructed for the whole experimental period. The associated parametric and process uncertainty analyses clearly demonstrate that the basic HM understanding must be sound. However, to demonstrate this degree of robustness, the explicit inclusion of process representations of water desaturation, liquid vaporisation, species exclusion porosity, and redox processes, is required.     

Development of numerical scheme for phase field crystal deformation simulation

The phase field crystal (PFC) method is anticipated as a new multiscale method, because this method can reproduce physical phenomena depending on atomic structures in metallic materials on the diffusion time scale. Although the PFC method has been applied to some phenomena, there are few studies related to evaluations of mechanical behaviors of materials by appropriate PFC simulation. In a previous work using the PFC method, tensile deformation simulations have been performed under conditions where the volume increases during plastic deformation. In this study, we developed a new numerical technique for PFC deformation simulation that can maintain a constant volume during plastic deformation. To confirm that the PFC model with the proposed technique can reproduce appropriate elastic and plastic deformations, we performed a series of deformation simulations in one and two-dimensions. In one- and two-dimensional single-crystal simulations, linear elastic responses were confirmed in a wide strain rate range. In bicrystal simulations, we could observe typical plastic deformations due to the generation, annihilation and movement of dislocations, and the interaction between the grain boundary and dislocations. Moreover, the deformation behaviors of a nanopolycrystalline structure at high temperature were simulated and the intergranular deformations caused by grain rotation and grain boundary migration were reproduced.     

Flow‐Based Automatic Generation of Hybrid Picture Mazes

A method for automatically generating a picture maze from two different images is introduced throughout this paper. The process begins with the extraction of salient contours and edge tangent flow information from the primary image in order to build the overall maze. Thus, mazes with passages flowing in the main edge directions and walls that effectively represent an abstract version of the primary image can be successfully created. Furthermore, our proposed approach makes possible the use of their solution path as a means of illustrating the main features of the secondary image, while attempting to keep its image motif concealed until the maze has been finally solved. The contour features and intensity of the secondary image are also incorporated into our method in order to determine the areas of the maze to be shaded by allowing the solution path to go through them. Moreover, an experiment has been conducted to confirm that solution paths can be successfully hidden from the participants in the mazes generated using our method.     

Development of a new X-ray source using backscattered X-ray with the use of a cold cathode

The development of an intense X-ray source using backscattered X-ray produced using an advanced electrode configuration is described. The electrodes were composed of field emitters deposited on a wire mounted on a perforated plate as the cathode and a copper plate as the anode. Electrons from these emitters collided with the copper plate and X-ray was generated at collision points. The backscattered X-ray in the direction normal to the electron trajectory through a hole in the anode escaped from the vacuum chamber through a beryllium window. Continuous and characteristic X-rays were detected at an applied voltage lower than that of a conventional X-ray source from 3.0 to 9.4 kV, respectively. Moreover, the X-ray dosage measured with a survey meter reached 0.95 mSv/h at 5.0 kV of applied voltage. The transmission images of three types of material used as an X-ray source for the X-ray imaging system indicate three advantages; low power consumption, focal point controllable by adjusting applied voltage, and photographable motion picture of X-ray transmission.     

Production of lepidimoide by an endophytic fungus from polysaccharide extracted from Abelmoschus sp.: identification of the product and the organism producing it

A highly potent allelopathic factor, lepidimoide, was initially extracted from mucilage of germinated cress seeds. Polysaccharide extracted from okra (Abelmoschus esculentum Moench) is considered to have a similar structure to lepidimoide as its repeating unit. We therefore initiated the screening of enzymes capable of degrading okra polysaccharide into lepidimoide from endophytes. We discovered an endophytic fungal strain AHU9748 isolated from Coleus galeatus, which produced an oligosaccharide having similar properties to lepidimoide on thin layer chromatography. The physico-chemical data from ESI-MS, NMR spectra and other analyses also showed the purified product to be identical to lepidimoide. The strain AHU9748 was identified as a fungus belonging to the coelomycetes, closely related to the genus Colletotrichum, based on morphological characteristics and sequence analysis of the 18S rDNA and ITS region.     

Laser Thomson scattering and optical emission studies of striated PDP micro‐discharge plasmas

Abstract— Properties of a plasma‐display‐panel (PDP) like discharge were examined by emission and laser Thomson scattering (LTS) measurements. Emission measurements were performed using an intensified CCD camera. By varying several external parameters such as the amplitude of the input voltage, gas composition, and pressure, the influence of these parameters on the discharge behavior was studied. Results of emission measurements showed that they were in good agreement with similar emission measurements on real PDP cells. LTS measurements were performed for the striated PDP‐like discharge at a pressure of 100 Torr and the results showed clear modulations in both profiles of electron density and electron temperature.