Adsorption of trypsin onto poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres and its enzymatic activity

Poly(2-hydroxyethyl methacrylate)/polystyrene (PHEMA/PS) composite microspheres were produced by emulsifier-free seeded emulsion polymerization for styrene in the presence of PHEMA seed particles. Effects of the surface characteristics of the PHEMA/PS composite microspheres on the adsorption immobilization of trypsin and on its enzymatic activity were discussed. Above 5 mol% of HEMA content, trypsin molecules adsorbed had high activity, 65–100% of the activity of free trypsin. The excellence of the composite microspheres as a carrier for trypsin seems to be closely related with the surface heterogeneity consisting of both hydrophilic and hydrophobic parts.     

Physicochemical characteristics of rapidly dried onion powder and its anti-atherogenic effect on rats fed high-fat diet

Rapidly dried onion (Allium cepa L. cv. Momiji No. 3) powder (OP) prepared from the outer layers (from second to fourth scale leaves from the surface) of onion bulbs was analysed for its quercetin and polyuronide contents, the effects of enzymatic treatment and the anti-atherogenic effect on rats fed a high-fat diet. Quercetin 4′-glucoside (50%), free quercetin (30%) and quercetin 3,4′-diglucoside (20%) were identified as quercetin derivatives, and boiling-water extraction was effective in extracting these compounds. OP contained 12.9% of polyuronides, the basic skeleton of pectin. Enzymatic degradation (cellulase and pectinase, 50 °C for 12 h, pH 6.0) of OP was effective in obtaining a slurry of smaller particle sizes. The free quercetin increased and the glucosides decreased with enzyme treatment. In Wistar rats fed an OP-added high-fat diet, the total cholesterol, HDL-cholesterol and triglyceride concentrations were not significantly different from the rats fed a high-fat diet without OP. However, the atherogenic index (AI) of Wistar rats fed an OP-added high-fat diet was lower (AI = 3.3) than rats fed the diet without OP (AI = 4.1). The incremental elastic modulus (IEM) of the aorta from rats fed the OP-added diet was also significantly lower than that of the rats fed the diet without OP. The AI and IEM values of the rats fed the OP-added diet were quite similar to the values of rats fed the diet without OP but were allowed spontaneous exercise. These results suggest that OP intake is effective for decreasing the risk of arteriosclerosis.     

Experimental study on hysteresis phenomena of shock wave structure in an over-expanded axisymmetric jet

In recent studies on two-dimensional supersonic jets, it is reported that the hysteresis phenomenon for the reflection type of shock waves in the jet flow field is occurred under the quasi-steady flow condition and this phenomenon is affected by the transitional pressure ratio between the regular reflection and Mach reflection. However, so far, there are few researches on the hysteresis phenomenon for the transition of shock waves between regular and Mach reflection in over-expanded supersonic jets and the phenomenon has not been investigated satisfactorily. Therefore, the purpose of this study is to clarify the hysteresis phenomena for the reflection type of shock wave in the over-expanded axi-symmetric supersonic jet experimentally, and to discuss the relationship between hysteresis phenomenon and rate of the change of pressure ratio with time. Furthermore, the effect of Mach number at the nozzle exit on hysteresis loop was investigated for two kinds of nozzle.     

Simplified stable crack growth analyses of welded CT specimens—comparison study of GE/EPRI, reference stress and R6 methods

This paper describes some simplified stable crack growth analyses of two kinds of inhomogeneous CT specimens. The one is machined from a submerged are welded plate of a nuclear pressure vessel A533B Class 1 steel, while the other is machined from an electron-beam welded plate of the A533B Class 1 steel and a high strength HT80 steel. In both specimens, initial cracks are placed to be normal to the fusion line. The ratio of yield stresses of the weld metal and the base metal of the A533B Class 1 steel is about 1·15, while that of the HT80 and the A533B Class 1 steels is about 1·4.

The generation phase crack growth analyses using the GE/EPRI and the reference stress methods are performed, calculating an applied load (P) and the J-value, while the application phase analyses of analyses using the R6 method are performed to calculate the maximum value of the applied load (P_max). Finally, some modification procedures of the three simplified estimation schemes are discussed in order to apply them to inhomogeneous material regimes.     

Ketones from carboxylic acids over supported magnesium oxide and related catalysts

Silica-supported alkaline earth oxides revealed excellent activity to convert acetic acid selectively into acetone in a vapor-phase fixed-bed flow system. Acetone was obtained through the cyclic formation of alkaline earth acetate followed by decomposition. Magnesium oxide should be supported on the silica surface without formation of magnesium silicate, which was inactive for the present reaction. Attempted syntheses of benzophenone and acetophenone are also described.     

A Computational Study of Thrust Vectoring Control Using Dual Throat Nozzle

Dual throat nozzle （DTN） is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze the performance of a dual throat nozzle at various mass flow rates of secondary flow and nozzle pressure ratios （NPR）. Two-dimensional, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. The present computational results were validated with available experimental data. Based on the present results, the control effectiveness of thrust-vectoring is discussed in terms of the thrust coefficient and the coefficient of discharge.     

Synthesis of thermoresponsive copolymer/silica-coated magnetite nanoparticle composite and its application for heavy metal ion recovery

To enhance chemical stability and suppress of aggregation of magnetite nanoparticles (MNPs), which are used as a support for thermoresponsive copolymer immobilization, silica coating of the MNPs is applied via the electrooxidation method. Although the resulting silica coated-MNPs also formed aggregates, the size distribution of the aggregate shifted to smaller size range. Because of that, the surface area available for copolymer immobilization increased approximately 6.7 times at maximum as compared with that of the uncoated MNPs. It contributed to the increase of the amount of the immobilized copolymer on the silica-coated MNPs, which is approximately four times larger than that on the uncoated MNPs. Fe₃O₄ dissolution test confirmed enhancement of chemical stability of MNPs. The thermoresponsive copolymer immobilized on the silica-coated MNPs shows the ability to recycle Cu(II) ion from Cu(II) containing solution by changing temperature with significantly shorter time than those in other thermoresponsive adsorbents in gel form.     

Direct Growth of Germanene at Interfaces between Van der Waals Materials and Ag(111)

Germanene, a 2D honeycomb germanium crystal, is grown at graphene/Ag(111) and hexagonal boron nitride (h-BN)/Ag(111) interfaces by segregating germanium atoms. A simple annealing process in N₂ or H₂/Ar at ambient pressure leads to the formation of germanene, indicating that an ultrahigh-vacuum condition is not necessary. The grown germanene is stable in air and uniform over the entire area covered with a van der Waals (vdW) material. As an important finding, it is necessary to use a vdW material as a cap layer for the present germanene growth method since the use of an Al₂O₃ cap layer results in no germanene formation. The present study also proves that Raman spectroscopy in air is a powerful tool for characterizing germanene at the interfaces, which is concluded by multiple analyses including first-principles density functional theory calculations. The direct growth of h-BN-capped germanene on Ag(111), which is demonstrated in the present study, is considered to be a promising technique for the fabrication of future germanene-based electronic devices.     

Immersion‐Angle Dependence of the Resonant‐Frequency Shift of a Quartz Crystal Microbalance in Three Types of Newtonian Liquids

Abstract

The present work reports the new characteristics of the immersion‐angle dependence of the resonant‐frequency shift (ΔF) of the one‐face sealed quartz crystal microbalance (QCM) in three types of Newtonian liquids, i.e., sucrose, glucose, and glycerol solutions. Below some 1.80×10^?2 g cm^?2 · s^?1/2, the ΔF values are dependent on the immersion angles in all solutions. However, we have found that the transition phenomenon of ΔF occurs between 1.78×10^?2 and 4.80×10^?2 g · cm^?2 · s^?1/2 in the sucrose solution, between 1.75×10^?2 and 4.34×10^?2 g · cm^?2 · s^?1/2 in the glucose solution and between 1.83×10^?2 and 3.03×10^?2 g · cm^?2 · s^?1/2 in the glycerol solution, respectively. Moreover, above the concentrations of the end points of the transition phenomenon, the ΔF values of the sucrose solution are equal to those of 90° at all immersion angles. On the other hand, those of the glucose and the glycerol solutions are the same as those of 30°. This difference may be caused by inherent characteristics of adsorption to the surface of the QCM electrode.     

Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device

In the field of surgery, achieving adhesion between a polymer implant and tissue poses a challenge considering that suturing is not appropriate for the stability of such implants. An ultrasonically activated scalpel that generates heat by mechanical vibration and promotes adhesion between a polymer implant and native tissue by pressing the two materials together has very good potential for application in the field. To determine the type of polymer that is suitable for the purpose, we investigated polyethylene (PE) and polystyrene (PS) films, the surfaces of which were activated by corona discharge. Graft polymerization was then performed on the corona‐treated surfaces to vary their properties. The corona‐treated PE and PS films grafted with poly(acrylic acid), poly(methacrylic acid), poly(vinyl benzylacrylic acid), and poly(hydroxylethyl acrylate), respectively, adhered to the tissue when the ultrasonically activated scalpel was applied. The heat generated by the mechanical vibration and the applied pressure enabled the carboxyl or hydroxyl groups to bond with the proteins in the extracellular matrix. We therefore concluded that it was possible to integrate this technique in the development of new types of polymer devices that could be stably implanted in a living body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40885.