EACLE : Energy-Aware Clustering Scheme with Transmission Power Control for Sensor Networks

In this paper, we propose a new energy efficient clustering scheme with transmission power control named “EACLE” (Energy-Aware CLustering scheme with transmission power control for sEnsor networks) for wireless sensor networks, which are composed of the following three components; “EACLE clustering” is a distributed clustering method by means of transmission power control, “EACLE routing” builds a tree rooted at a sink node and sets the paths from sensor nodes taking energy saving into consideration, and “EACLE transmission timing control” changes the transmission timing with different levels of transmission power to avoid packet collisions and facilitates packet binding. With an indoor wireless channel model which we obtained from channel measurement campaigns in rooms and corridors and an energy consumption model which we obtained from a measurement of a chipset, we performed computer simulations to investigate the performance of EACLE in a realistic environment. Our simulation results indicate that EACLE outperforms a conventional scheme such as EAD (Energy-Aware Data-centric routing) in terms of communication success rate and energy consumption. Furthermore, we fully discuss the impact of transmission power and timing control on the performance of EACLE.     

New DC Chopper Circuits Using Fast-Switching Reverse-Conducting Thyristors for Low-Voltage DC Motor Control

Fast- switching reverse-conducting thyristors have been developed and used in dc chopper apparatus to control the speed of highvoltage dc traction motors. The newly developed dc chopper circuit and its application for low-voltage dc motor control are discussed. The fast-switching reverse-conducting thyristor is utilized as the main thyristor to control load current.     

Adsorption Desalination Quenches Global Thirst

The search for fresh or potable water remains a pressing concern throughout many regions of the world. Although most of the Earth's surface is covered by oceans, the effort to provide for the world's inhabitants with fresh or potable water seems to be insurmountable; at least one billion people do not have access to clean and fresh water. The World Health Organization (WHO) reported that about 41% of the Earth's population lives in water-stressed areas, and the number of people in the water scarce regions may climb to 3.5 billion by the year 2025. Thus, innovative and cost-effective desalination technologies for producing fresh water are needed to provide practical solutions.     

High-efficiency quasimicrowave GaAs FET power amplifier

A 1.7 GHz-based class-F GaAs FET amplifier is proposed. To achieve high-efficiency performance, a precisely adjustable terminating circuit constructed with lumped elements is introduced. Power-added efficiency of 68% at 1.5 W output is attained with the amplifier.     

Chain packing in graphs

This paper discusses the complexity of packingk-chains (simple paths of lengthk) into an undirected graph; the chains packed must be either vertex-disjoint or edge-disjoint. Linear-time algorithms are given for both problems when the graph is a tree, and for the edge-disjoint packing problem when the graph is general andk = 2. The vertex-disjoint packing problem for general graphs is shown to be NP-complete even when the graph has maximum degree three andk = 2. Similarly the edge-disjoint packing problem is NP-complete even when the graph has maximum degree four andk = 3.     

High-velocity impact experiment of aluminum foam sample using powder gun

Porous materials such as aluminum foam have been investigated for possible use as impact shock absorbers in transportation aeronautic applications. However, the response of aluminum foam during impacts at high velocities of more than 100 m/s is not yet fully understood. A high-velocity impact experiment was therefore carried out to clarify impact shock absorption properties of aluminum foam. A one-stage powder gun was used to accelerate an aluminum foam sample to impact a rigid wall. Velocity and deformation of the aluminum foam sample during impact was studied using a digital high-speed video camera, while the pressure wave in the aluminum foam sample was measured using a PVDF gauge. The experimental observations revealed uneven collapse of the aluminum foam sample structure during high speed impact with a general stress plateau effect, typical for cellular material structures when subjected to quasi-static loading.     

Phase-diagram study for the Al2O3-CaF2-SiO2 system

Phase relations for the Al₂O₃-CaF₂-SiO₂ system were investigated from 1673 to 1723 K. The hotfilament technique was applied to observe a two-liquid region and liquidus for the ternary system. The liquidus saturated with SiO₂ was investigated at 1673 K by using the hot-filament technique and the chemical equilibrium technique. In this system, the addition of Al₂O₃ to the CaF₂-SiO₂ system reduces the congruent temperature. A small substitution of Al₂O₃ for CaF₂ increases the solubility of SiO₂, namely, if the region of liquid phase could be enlarged. These results suggest that Al₂O₃ would be an effective substitute of CaF₂ in slag for steelmaking.     

Numerical nonlinear observers using pseudo‐Newton‐type solvers

In constructing a globally convergent numerical nonlinear observer of Newton‐type for a continuous‐time nonlinear system, a globally convergent nonlinear equation solver with a guaranteed rate of convergence is necessary. In particular, the solver should be Jacobian free, because an analytic form of the state transition map of the nonlinear system is generally unavailable. In this paper, two Jacobian‐free nonlinear equation solvers of pseudo‐Newton type that fulfill these requirements are proposed. One of them is based on the finite difference approximation of the Jacobian with variable step size together with the line search. The other uses a similar idea, but the estimate of the Jacobian is mostly updated through a BFGS‐type law. Then, by using these solvers, globally stable numerical nonlinear observers are constructed. Numerical results are included to illustrate the effectiveness of the proposed methods. Copyright © 2007 John Wiley & Sons, Ltd.     

Role of adsorbed iodine into poly(vinyl alcohol) films drawn in KI/I2 solution

We have investigated the microstructure of the poly(vinyl alcohol) (PVA) films using small- and wide-angle X-ray scattering (SAXS and WAXS, respectively) techniques. The samples were uniaxially drawn in water or KI/I₂ aqueous solution and then dried in an air-oven at 333 K for 1 h prior to SAXS and WAXS measurements. It was found that for the films drawn in KI/I₂ solution PVA chains in the microfibrillar structure are more extended upon the film drawing compared to the case of the films drawn in pure water, which is resulted from the correlation function analysis on the SAXS data. Adsorbed iodines into the film were anticipated to act as junction points between the microfibrils via the formation of the PVA-iodine complexes.     

Approximate calculation method for integral of mean square value of nonstationary response

The response of the structure subjected to nonstationary random vibration such as earthquake excitation is nonstationary random vibration. Calculating method for statistical characteristics of such a response is complicated. Mean square value of the response is usually used to evaluate random response. Integral of mean square value of the response corresponds to total energy of the response. In this paper, a simplified calculation method to obtain integral of mean square value of the response is proposed. As input excitation, nonstationary white noise and nonstationary filtered white noise are used. Integrals of mean square value of the response are calculated for various values of parameters. It is found that the proposed method gives exact value of integral of mean square value of the response.