Approximate calculation method for integral of mean square value of nonstationary response

The response of the structure subjected to nonstationary random vibration such as earthquake excitation is nonstationary random vibration. Calculating method for statistical characteristics of such a response is complicated. Mean square value of the response is usually used to evaluate random response. Integral of mean square value of the response corresponds to total energy of the response. In this paper, a simplified calculation method to obtain integral of mean square value of the response is proposed. As input excitation, nonstationary white noise and nonstationary filtered white noise are used. Integrals of mean square value of the response are calculated for various values of parameters. It is found that the proposed method gives exact value of integral of mean square value of the response.     

Phase-diagram study for the Al2O3-CaF2-SiO2 system

Phase relations for the Al₂O₃-CaF₂-SiO₂ system were investigated from 1673 to 1723 K. The hotfilament technique was applied to observe a two-liquid region and liquidus for the ternary system. The liquidus saturated with SiO₂ was investigated at 1673 K by using the hot-filament technique and the chemical equilibrium technique. In this system, the addition of Al₂O₃ to the CaF₂-SiO₂ system reduces the congruent temperature. A small substitution of Al₂O₃ for CaF₂ increases the solubility of SiO₂, namely, if the region of liquid phase could be enlarged. These results suggest that Al₂O₃ would be an effective substitute of CaF₂ in slag for steelmaking.     

Numerical nonlinear observers using pseudo‐Newton‐type solvers

In constructing a globally convergent numerical nonlinear observer of Newton‐type for a continuous‐time nonlinear system, a globally convergent nonlinear equation solver with a guaranteed rate of convergence is necessary. In particular, the solver should be Jacobian free, because an analytic form of the state transition map of the nonlinear system is generally unavailable. In this paper, two Jacobian‐free nonlinear equation solvers of pseudo‐Newton type that fulfill these requirements are proposed. One of them is based on the finite difference approximation of the Jacobian with variable step size together with the line search. The other uses a similar idea, but the estimate of the Jacobian is mostly updated through a BFGS‐type law. Then, by using these solvers, globally stable numerical nonlinear observers are constructed. Numerical results are included to illustrate the effectiveness of the proposed methods. Copyright © 2007 John Wiley & Sons, Ltd.     

Crystal growth of MgAlB14-type compounds using metal salts and some properties

LEAlB₁₄ (orthorhombic, Imam) (LE = Li, Mg) crystals were grown using metal salts (Li₂CO₃, LiF, LiI, MgO, MgF₂, MgI₂) and crystalline boron from a high-temperature aluminium metal flux. The growth conditions for growing LEAlB₁₄ were established using the starting mixtures of B/LE = 2.0, and Al metal was added to each mixture at a mass ratio of 1:15–20. LEAlB₁₄ crystals from the Al-self flux using metal salts could be obtained from all the different salts. The maximum dimensions of LiAlB₁₄ and MgAlB₁₄ crystals were approximately 18 and 12 mm for the crystals obtained from LiF and MgF₂. The unit-cell parameters of as-grown LEAlB₁₄ are as follows: for LiAlB₁₄, obtained from LiF, a = 0.5846 (2) nm, b = 0.8144 (2) nm, c = 1.0355 (3) nm, V = 0.4930 (2) nm³: for MgAlB₁₄, obtained from MgF₂, a = 0.5845 (2) nm, b = 0.8114 (2) nm, c = 1.0330 (3) nm, V = 0.4899 (3) nm³. Microhardness, oxidation resistance and magnetic susceptibility of these materials are described in detail.     

Development of a new sensorless vector‐controlled and transmissionless electric vehicle using a permanent‐magnet synchronous motor

One of the most important technologies for electric vehicles (EVs) will be drive control technology for the main motor. It is desired that the drive control technology have the following characteristics. (1) It does not require a position/speed sensor for controlling motor drive, which has been mounted on the rotor shaft. (2) It has vector controls that can produce torque quickly, efficiently, and/or precisely. (3) It has wide driving‐range and allows developing EVs with no variable transmission. This paper proposes new drive control technologies for such EVs using a permanent‐magnet synchronous motor as a main motor, and verifies its usefulness through development of an actual EV that can drive on public roads. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(3): 83–94, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20459     

A genetic algorithm with local search using activity list characteristics for solving resource‐constrained project scheduling problem with multiple modes

In this paper, we aim to solve the problem of resource‐constrained project scheduling with multiple modes (rc‐PSP/mM), in which multiple execution modes are available for each of the project's activity and with minimization of makespan as objective. We present a new genetic algorithm approach in order to solve this problem. In this procedure, we propose a new mutation operator that exploits a critical path and two new local search procedures, i.e. critical path improvement local search (cpiLS) and iterative forward/backward local search (ifbLS), using activity list characteristics. The cpiLS reduces the critical path and the ifbLS improves resource allocation of the schedule of rc‐PSP/mM. Also, to evaluate the proposed approach, we compare the results of the computational experiment on certain standard project instances with the several competing heuristic procedures presented in the literature, and it has been revealed that our procedure is one of the most competitive among the algorithms. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Mechanistic study on analyte focusing by dynamic pH junction in capillary electrophoresis using computer simulation

Dynamic pH junction is an on-line preconcentration method in capillary electrophoresis (CE) based on electrokinetic focusing of weakly ionic analytes with in large sample volumes in a multisection electrolyte system. In this report, experiments and computer simulations were performed to gain a better insight of the analyte focusing mechanism when a dynamic pH junction was used. A computer program, SIMUL, was used to simulate the band-narrowing process of a group for phenol derivatives under optimized buffer conditions, which were compared with experimental results. Computer simulations revealed the formation of a sharp moving pH boundary within the sample zone causing efficient focusing of long plugs of weakly acidic analytes based on their pKa. These studies offered useful information for understanding the band-narrowing process by control of the depth and lifetime of the moving pH boundary as a function of analyte pKa, sample pH, and injection length. The change in pH of the sample within the capillary was also estimated by measuring the absorbances of an analyte at two different wave-lengths. Optimization of analyte focusing resulted in enhanced detection responses of about 60-450-fold in terms of peak heights for some phenol derivatives' relation to conventional injections. Dynamic pH junction represents a novel approach to control band dispersion (peak width) and selectivity (mobility) of specific analytes for high-resolution CE separations.     

环境·流线·空间——第三届亚洲冬季运动会综合体育馆设计特点分析

文章介绍了１９９６年２月在哈尔滨举行的第三届亚洲冬季运动会的综合体育馆。该馆是从环境分析，整体流线安排及室内外空间的处理等方面进行设计的。作者通过对环境，流线和空间的探索，总结出在设计中应着重注意的几个问题及有关的解决办法。并希望它将有益于未来体育馆的设计。     

哈尔滨近代建筑的形态母题及美学意匠1、2

本文从形态学的角度通过对哈尔滨近代建筑顶部形态（屋顶突出物和女儿墙）的细部构成的归纳、抽象，概括出其母题的基本类型；并根据统计结果，得出具有普遍性的形态母题。通过对整体关系的抽象，概括出其模式的基本类型；并根据统计结果，得出具有普遍性的关系模式；在上述定量分析的基础上，结合美学原理，对其所蕴含的美学意匠作了分析。