Suppressing the effect of lightning-induced overvoltages by the combined use of surge arresters and overhead ground wires

Lightning voltage induced by nearby strokes is one of the causes of major overvoltages which threaten the insulation of power distribution lines. Surge arresters as well as an overhead ground wire usually are employed for the protection of equipment and line insulation on overhead power distribution lines. The fundamental mechanism of suppressing effects of overvoltages induced by nearby strokes has been demonstrated independently by one of the present authors for surge arresters and for an overhead ground wire. In this paper, the protective effect of the combination of surge arresters and overhead ground wire is analyzed. As a result, it is found that the effect of surge arresters used together with an overhead ground wire is almost the same as that of surge arresters alone.     

Decomposition of Benzene Using Ag/TiO2 Packed Plasma-Driven Catalyst Reactor: Influence of Electrode Configuration and Ag-Loading Amount

This paper describes the effects of electrode configuration and the loading amount of Ag catalyst on the decomposition of gas-phase benzene using plasma-driven catalyst (PDC) reactors. Modification of ground electrode brought out a great enhancement in the energy efficiency for benzene decomposition by reducing abnormal discharges outside the reactor tube. The data of carbon balance and the selectivity of CO₂ indicated that the Ag catalyst played an important role in the decomposition of benzene, especially for the intermediates. The larger the Ag-loading amounts on the TiO₂, the better the performance of benzene decomposition in terms of the carbon balance and the selectivity of CO₂. Formation of NO₂ and N₂O indicated that the maximum specific input energy applicable to the PDC reactor should be determined not only by the decomposition efficiency but also by the formation of nitrogen oxides.     

Creation of functional materials by use of a slow crystallization process in the nonequilibrium state. I. porous polyamide microparticles

Recently a number of investigations have focused on the self‐organization process from the nonequilibrium state as a new technique that may be used to develop many functional materials. In many cases, amorphous polymers were used and semicrystalline polymers were seldom used in spite of their importance. In this study, we basically investigated the crystal structure, crystalline process, and inner structures of polyamide by using slow phase separation and crystallization process from the nonequilibrium state of the polymer solution. We were able to observe the crystalline lamella growing twisted from the center of the particle. Between these lamella layers, narrow pores were created. From this investigation, we developed a new method to create functional materials of polyamide, the semicrystalline polymer. Porous spherical particles may be properly applied to functional materials such as adsorption materials, catalyst support materials, and so on. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2428–2432, 2003     

Switching of H∞ controller under constraints and decision of controller state at instance of the controller switching

In real control systems, certain constraints are placed on the input, state, and output values. If such constraints are violated, the system may become unstable, in a worst‐case scenario. One of the promising approaches to solving this problem is to switch the controller according to the state of the closed‐loop system. No useful design strategy for each controller, however, has yet been developed. In addition, the determination of the controller state at the instant of controller switching has not been investigated. First, this paper presents a new design methodology which merges the switching control and H_∞ controller design into one design algorithm. Second, this paper presents a way of determining the controller state at the instant of controller switching. Finally, the proposed method is applied to force control of a one‐DOF manipulator in order to demonstrate the usefulness of the proposed method. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 142(2): 68–75, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10082     

A quality growth model and its application to initial production process control

During initial production of a new product prior to actual production, the decrease in the fraction defective of units produced can be observed as personnel gather experience and the faults in the product's design, manufacturing, etc. are removed. This paper discusses an initial production process control based on a quality growth model proposed here. The model describes a continuing reduction in the cumulative defect rate defined by the ratio of the cumulative number of defective units to that of produced units. A stopping rule is also investigated for determining when to discontinue the initial control of the production process and proceed to the actual production stage. Further, a numerical example of the application is presented.     

Medical image processing: An overview of and case study in the diagnosis of cardiac diseases

In this paper an overview is presented on R&D of medical imaging and image processing techniques in Japan during the last decade, focusing on case studies in the diagnosis of cardiac diseases.Various problems of image processing of left ventricular images obtained from x-ray, ultrasound and radionuclides are discussed. Also reviewed are boundary detection methods of left ventricular inner cavity and myocardium, analysis of left ventricular wall motion and various kinds of cardiac functions using conventional and newly developed methods, and display methods of these cardiac functions.Microcomputerized on-line image processing systems and a compound sector scan echocardiography using two probes developed for echocardiographic examinations are shown with some results in clinical applications.3-dimensional reconstruction methods of the left ventricle and other organs from multiple 2-dimensional images are shown with 3-dimensional shapes reconstructed from images by x-ray, ultrasound and radionuclides. Moreover, 3-dimensional functional images of the left ventricle are shown as well. Transferring the 3-dimensional consecutive left ventricular images during a cardiac cycle onto a CRT display under the control of a microprocessor, we can observe the pulsating 3-dimensional left ventricle on the CRT.     

Theoretical analysis of knock-out release of fission products from nuclear fuels

The knock-out release of fission products is studied theoretically. The general equations of knock-out release are derived, assuming that a fission fragment passing through the surface of nuclear fuels knocks out a local region of the surface with an effective thickness and an effective cross-sectional area. Using these equations, the knock-out release of fission gases is calculated for various cases. The conditions under which the knock-out coefficients (the average number of uranium atoms knocked out by one fission fragment) is obtainable are clarified by experiments on the knock-out release of fission gases. A method of determining the effective thickness and the effective cross-sectional area of a knock-out region is proposed.