Synthesis and characterization of novel copolymers with acid‐labile ketal moieties derived from camphor

Novel diastereomeric acrylic ketal monomers derived from (+)‐camphor and (±)‐camphor were synthesized. To investigate the applications of the camphor derivatives on positive‐tone photoresists, the acrylic ketal monomers were copolymerized with methyl methacrylate, methacrylic acid, and n‐butyl methacrylate. The optical activities of the chiral monomers and polymers were all evaluated. After UV irradiation and postexposure baking, the optical activity of the polymers decreased because of the decomposition of the acid‐labile pendant chiral groups. The existence of alicyclic camphyl groups increased the etching resistance of the photoresists. The thermogravimetric properties of the copolymers, the exposure curves, the lithographic evaluation of the positive‐tone photoresists, and the effects of alicyclic groups on the plasma etching resistance of the copolymers were all investigated. A resolution of a line‐and‐space pattern of 0.3 μm was achieved. Acid‐catalyzed dehydration crosslinking was also found in this system. Sufficient UV irradiation and heat treatment could cause the acid‐catalyzed dehydration crosslinking of pendant carboxyl groups and thereby increase the efficiency of the thermal resistance of the polymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2969–2978, 2003     

Analysis of cell aggregation in the culturing of cerebellar granule neurons

We have proposed previously that an increased concentration of growth factor secreted by neurons themselves has a direct effect on survival of the neurons, and thereby cell density serves as a regulator of survival of neurons. In this study, the same idea was used to analyze the aggregation of cerebellar granule neurons in culture experimentally and theoretically. Assuming the transport of growth factor and substrate within an aggregate is by molecular diffusion, the metabolic efficiency of neurons, on the basis of an autocatalytic phenomenon, was increased within an aggregate compared to an identical quantity of dispersed cells. A good agreement in the size of neuronal aggregate between the theoretical prediction and the experimental result was found. This illustrates that growth factors produced by neurons acting in either an autocrine or paracrine manner play an important role during the development of cultured neurons.     

Effect of imidization temperature on properties of polymide films

Some mechanical and electrical properties of the BPDA/ODA/PDA polyimide film prepared on mylar followed by various cure schedules have been studied. It has been found by FTIR that the imidization reaches its maximum after a 200°C cure schedule for this polyimide. However, the optimum condition of curing is a 350°C cure schedule. Following this cure schedule, one can obtained a polymide film with good mechanical and electrical properties. © 1993 John Wiley & Sons, Inc.     

Corrosion-resistant lightweight metallic bipolar plates for PEM fuel cells

Corrosion resistant treated metal bipolar plates with higher rigidity and electrical conductivity than graphite were developed and tested for PEM fuel cell applications. Six replicas of single cells were used three of which were made of graphite composites bipolar plates and the other three of the treated metallic plates. A Membrane Electrode Assembly (MEA) with 5.55 cm² active electrode areas, 0.3 mg cm^–2 Pt loading and Nafion membrane 115 was fitted to each cell and operated under identical conditions. The experimental testing was conducted at room temperature (20 °C). The average value of the data obtained for the three graphite cells was plotted. Similarly, the average value of the data obtained for the three treated metal cells was plotted on the same graph for comparison. Generally, the treated metal bipolar plate provided at least 12% saving in hydrogen consumption in comparison to graphite. This is attributed to the lower bulk and surface contact resistance of the metal used in this study in relation to graphite. The results of lifetime testing, conducted at room temperature under variable loading showed no indication of power degradation due to metal corrosion for at least 1500 hours.     

Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry     

Equilibrium and kinetic studies of the extraction of chelated copper(II) anions with Aliquat 336

The equilibrium and kinetics of solvent extraction of Cu²⁺ from aqueous solutions containing equimolar EDTA with Aliquat 336 in n‐decanol and kerosene at 298 K were investigated. The concentrations of Cu²⁺ (8–50 mol m^?3), Cl^? (5–60 mol m^?3), and Aliquat 336 (20–100 mol m^?3) were varied. A semi‐empirical model with three parameters was proposed to describe the equilibrium behavior, in which the non‐idealities in both aqueous and organic phases were considered. Over the ranges studied, the model agreed reasonably well with the experimental data (standard deviation, 15%). The forward and backward reaction rate constants were determined as (5.31 ± 0.16)×10^?6 m^9/4 mol^?3/4 s^?1 and (2.62 ± 0.09)×10^?7 s^?1, respectively, at 298 K. An interfacial reaction mechanism was proposed, which revealed that the reaction between the chelated anions and trimeric amine molecules at the interface was rate limiting. The derived rate laws were consistent with the experimental results. © 2002 Society of Chemical Industry     

Bit-level systolic arrays for modular multiplication

This paper presents bit-level cellular arrays implementing Blakley's algorithm for multiplication of twon-bit integers modulo anothern-bit integer. The semi-systolic version uses 3n(n+3) single-bit carry save adders and 2n copies of 3-bit carry look-ahead logic, and computes a pair of binary numbers (C, S) in 3n clock cycles such thatC+S[0, 2N). The carry look-ahead logic is used to estimate the sign of the partial product, which is needed during the reduction process. The final result in the correct range [0,N) can easily be obtained by computingC+S andC+S–N, and selecting the latter if it is positive; otherwise, the former is selected. We construct a localized process dependence graph of this algorithm, and introduce a systolic array containing 3nw simple adder cells. The latency of the systolic array is 6n+w–2, wherew=n/2. The systolic version does not require broadcast and can be used to efficiently compute several modular multiplications in a pipelined fashion, producing a result in every clock cycle.     

Joining alumina to inconel 600 and UMCo-50 superalloys using an Sn10Ag4Ti active filler metal

Alumina ceramics were brazed to Inconel 600 and UMCo-50 superalloys at 900 °C for 10 min using an Sn10Ag4Ti active filler metal. The brazing filler showed good wettability on alumina and superalloys. The flexural strengths were 69 and 57 MPa for alumina/Inconel 600 and alumina/UMCo-50 joints, respectively. In both cases, the brazed specimens fractured along the Sn10Ag4Ti/superalloy interfaces after four-point bending tests. Electron probe microanalysis (EPMA) elemental mapping revealed that the Ni of Inconel 600 and the Co of UMCo-50 dissolved into Sn10Ag4Ti filler metal, which serves to reinforce the weak Sn10Ag4Ti matrix.     

Simulation of ultrasonic-vibration drawing using the finite element method (FEM)

In ultrasonic-vibration drawing, wires are drawn while ultrasonic vibration is applied to a drawing die. Prior studies provide experimental proof that ultrasonic-vibration drawing reduces drawing resistance, improves lubrication and prevents wire breakage. In the future, ultrasonic-vibration drawing is expected to contribute to the drawing of difficult-to-draw materials and operations, such as shaped wires, ultrafine wires, and the wire drawing operation in semidry or dry condition. However, a detailed analysis and understanding of the mechanism of improvement is not possible on the basis of conventional experimental observations because the ultrasonic-vibration processing phenomenon occurs at high speed. Therefore, we attempted to understand the processing mechanism of ultrasonic-vibration drawing using the finite element method (FEM). ABAQUS was used for the FEM. Drawing force and stress–strain distributions in drawn wires were analyzed. From these studies, we quantitatively clarified the mechanism of improved drawing characteristics, such as decreased drawing force.     

Screen‐based color vision test for digital quantification of deutan color defects using a color‐calibrated monitor

Display technologies are used in various industries. However, few studies on color vision testing using self‐luminous displays are reported. In this study, a screen‐based color vision test, termed the digital color vision test (DCVT), is developed on a color‐calibrated monitor. A control bar is adjusted by the observer to build just noticeable chromatic difference ellipses in CIE u′v′ chromaticity diagram, which indicate the capabilities of subjects' color visions. Ten color‐normal observers and 13 deutan observers participated in the psychophysical experiments. The observers also performed the other two typical diagnostic tests (D‐15 and anomaloscope). Results from the experiment using the adjustment psychophysical method for digital quantification of deutan color vision defects are presented. It is found that the diagnosis accuracy of the DCVT is approximately equivalent to those of D‐15 and anomaloscope tests.