The data-driven microprocessor

Processor performance limitations that can be solved by data-flow processing are discussed. Data-flow-based software and multiprocessors are considered. A data-driven, 32-bit, five-chip set that performs real-time signal and distributed parallel processing without a system clock or centralized control unit is presented. Language processing and processor applications are examined     

The interaction of pulsed electric fields and texturizing ‐ antifreezing agents in quality retention of defrosted potato strips

The combination of pulsed electric fields (PEF) and texturizing and antifreeze agents on quality retention of defrosted potato strips were studied. Potato strips (10 mm thickness, 100 g) were placed in different solutions (1% w/v) of CaCl₂, glycerol, trehalose as well as NaCl and sucrose, treated with PEF (0.5 kV cm^?1, 100 pulses, 4 Hz). Then, all the samples were soaked in the same solutions for 10 min. After draining, samples were packed into polypropylene pouches and stored at ?18 °C for 12 h. Samples were thawed out at room temperature (20 °C) in 3 h. Untreated controls and PEF treated control samples were also frozen and thawed in similar conditions. To assess the potato strip quality, the thawed samples were analysed for moisture content, weight loss, firmness and colour attributes. The results indicate that PEF treatment by itself is not a suitable pre‐treatment method for frozen potato strips and should be assisted by CaCl₂ and trehalose treatment to prevent softening after defrosting. Firmness analyses determined that application of PEF alone results in 2.38 N. However, PEF in combination with CaCl₂ and trehalose result in 2.97 N and 2.99 N, respectively, which are both significantly firmer than the samples solely treated with PEF. CaCl₂ and trehalose were effective in not only maintaining the structural integrity of the cells, but also retaining colour attributes. The L* value was found to be higher (P < 0.05) in CaCl₂ and trehalose treated samples (58.95 and 57.21, respectively), as compared to PEF treated samples (53.97) denoting a darker colour. Application of CaCl₂ and trehalsoe in combination with PEF also resulted in significantly less weight loss after thawing.     

Effects of bovine serum albumin on the corrosion behaviour of AISI 316L, Co–28Cr–6Mo, and Ti–6Al–4V alloys in phosphate buffered saline solutions

The corrosion behaviour of AISI 316L, wrought Co–28Cr–6Mo and Ti–6Al–4V was studied in aerated solutions of phosphate buffered saline (PBS) at various concentrations of bovine serum albumin (BSA) at 37 °C. Open circuit potential, potentiodynamic polarization, linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS) experiments along with X-ray photoelectron spectroscopy (XPS) on Co–28Cr–6Mo oxide layer were conducted to study the interaction of BSA and passive layers and to measure the corrosion rates. Ti–6Al–4V alloy had the lowest corrosion rate and the highest breakdown potential. It was shown that BSA has enhanced the alloy passive film stability at higher concentrations.     

VLSI implementation of a variable-length pipeline scheme fordata-driven processors

A VLSI-oriented variable-length pipeline structure for data-driven processors is presented. Ordinary inline pipelines have the problem of minimizing the average total processing time through the pipeline, since subdivision of a function along the pipeline is usually optimized for the most complex operations in spite of the fact that simpler operations need fewer stages. As a solution to this problem, a variable-length pipeline scheme in which data go through only the necessary stages according to information contained within is proposed. The scheme has been implemented on a test chip to verify performance. The chip demonstrated a minimum fall-through time (data transmission time from input to output) of 14.4 ns and a data transmission rate in the pipeline of 59 megaword/s (that is, 1/16.9 ns) as a first-in first-out (FIFO) store. By modifying the data transfer control and allocating the processing functions corresponding to the data interval of 16.9 ns, this scheme is applicable as a high-performance processing unit for data-driven processors     

High drive current NMOS with Si-SiGe heterostructure low electric field channel

A drive-current enhancement in NMOS with a compressively strained SiGe structure, which had been a difficult challenge for CMOS integration with strained SiGe high-hole-mobility PMOS, was successfully achieved using a Si-SiGe heterostructure low electric field channel of optimum thickness. A 4-nm-thick Si low-field-channel NMOS with a 4-nm-thick Si/sub 0.8/Ge/sub 0.2/ layer improved drive current by 10% with a 20% reduction in gate leakage current compared with Si-control, while suppressing threshold-voltage rolloff characteristic degradation, and demonstrated excellent I/sub on/--I/sub off/ characteristics of I/sub on/ = 1 mA//spl mu/m for I/sub off/ = 100 nA//spl mu/m. These results are the best in ever reported NMOS with a compressively strained SiGe structure and indicate that a Si-SiGe heterostructure low-field-channel NMOS integrated with a compressively strained SiGe channel PMOS is a promising candidate for high-speed CMOS in 65-nm node logic technology.     

CuI and H2O2 Inactivate and FeII Inhibits [Fe]‐Hydrogenase at Very Low Concentrations

[Fe]‐Hydrogenase (Hmd) catalyzes reversible hydride transfer from H₂. It harbors an iron‐guanylylpyridinol as a cofactor with an Fe^II that is ligated to one thiolate, two COs, one acyl‐C, one pyridinol‐N, and solvent. Here, we report that Cu^I and H₂O₂ inactivate Hmd (half‐maximal rates at 1 μM Cu^I and 20 μM H₂O₂) and that Fe^II inhibits the enzyme with very high affinity (K_i=40 nM ). Infrared and EPR studies together with competitive inhibition studies with isocyanide indicated that Cu^I exerts its inhibitory effect most probably by binding to the active site iron‐thiolate ligand. Using the same methods, it was found that H₂O₂ binds to the active‐site iron at the solvent‐binding site and oxidizes Fe^II to Fe^III. Also it was shown that Fe^II reversibly binds away from the active site iron, with binding being competitive to the organic hydride acceptor; this inhibition is specific for Fe^II and is reminiscent of that for the [FeFe]‐hydrogenase second iron, which specifically interacts with H₂.     

In-situ Raman Spectroscopic Investigation of the Effect of Cooling Speed on Domain Formation in PbTiO3 Films

The influence of the post-deposition cooling speed on the domain formation process of PbTiO₃ films was investigated using MOCVD equipment combined with in-situ Raman spectroscopy. The accumulation and relaxation of strain during the post-deposition cooling process is responsible for the domain structure. The Curie temperature for fast cooling is lower than that for slow cooling. Additionally, the residual strain with fast cooling is smaller than that with slow cooling. These observations suggest that the volume fraction of the c-domain is larger for fast cooling and that the atmospheric conditions during the first post-deposition cooling process may control the domain structure.     

A comparative study on different concentration methods of extracts obtained from two raspberries (Rubus idaeus L.) cultivars: evaluation of anthocyanins and phenolics contents and antioxidant activity

The effects of conventional (CV) and microwave (MW) heating on total soluble solid (TSS) content, total anthocyanin content (TAC), total phenolic content (TPC) and antioxidant activity of raspberry juice obtained from two cultivars of Amol (AM) and Siyahkal (SK) were scrutinised. Antioxidant activity of the juices was measured by 2,2 diphenyl‐1‐picrylhydrazyl (DPPH) radical scavenging capacity and expressed as EC₅₀ value. In the both methods, the concentration rate constant for the juices was significantly decreased by increasing operational pressure from 12 to 100 kPa (P < 0.05). A first‐order reaction kinetic model was successfully fitted for the degradation of monomeric anthocyanins at all operating pressures. The results also showed that thermal treatment of MW compared CV in both SK and AM cultivars caused a lower decrease in the TAC, TPC and antioxidant activity. Moreover, the changes in trend of the antioxidant activities due to the thermal treatment were positively correlated with the TPC (r = 0.74, P < 0.05) and TAC (r = 0.61, P < 0.05).     

The effect of post-treatments on the powder morphology of titanium dioxide (TiO2) powders synthesized for cold spray

In this study, a novel synthesis method of TiO₂ powders that can be cold sprayed is presented. The synthesis technique is a simple hydrolysis method of titanyl sulfate (TiOSO₄) in distilled water with a small addition of inorganic salt. At a relatively low hydrolysis temperature, pure anatase TiO₂ can be obtained and post-synthesis treatments (annealing or hydrothermal treatment) do not alter this phase structure. The powder is agglomerated with fine nano primary particles, with different post-synthesis treatments leading to different TiO₂ nanostructures. Annealing causes a significant growth of primary particles with the existence of internal pores within a particle. On the other hand, hydrothermal treatment produces a unique oriented agglomeration structure where the primary particles are agglomerated in one single crystal axes. It is believed that the synergistic effect of inorganic ion adsorption and post-treatments results in the observed nanostructures. After cold spraying, it is revealed that these TiO₂ powders could be deposited via supersonic solid phase deposition (cold spray).     

Effect of VA-045, a novel apovincaminic acid derivative, on closed head injury-induced neurological dysfunction in aged rats

The purpose of the present study was to develop an animal model of nicotine self-administration that more closely approximates the conditions of human nicotine use than do existing models. In most nicotine self-administration models, rats acquire self-administration during brief daily sessions in which rapid injections of a relatively high dose of the drug, 0.03 mg/kg, serve as the reinforcer. The present study examined nicotine self-administration in rats that acquired the behavior while having virtually unlimited access to injections of a relatively low dose of the drug; the rats did not have any prior operant training or shaping. Under these conditions, rats readily acquire nicotine self-administration at doses at least as low as 0.00375 mg/kg per injection, and they self-administer throughout the active portion of their light cycle. The daily nicotine intake of rats, which ranged from 0.18 to 1.38 mg/kg per day, appears to be comparable to that of human smokers.