Chemical sensing by an electrical oscillator: Detection and quantification of cationic surfactants

A new chemical sensing system using an electrical oscillator has been developed. This sensing system measures the electrical ‘non-linearity’ at the surface of an electrode immersed in a test solution: a sinusoidal voltage is applied to the electrode and the higher harmonics of the output current are obtained by Fourier transformation. This sensing system has been used to detect and quantify surfactant molecules in solutions. The relative intensity P₂/P₁ of the peaks of the second (P₂) and first (P₁) harmonics in the output current was found to be linearly correlated with the logarithms of the concentrations of cationic surfactants such as cetylpyridium bromide (CPB) and cetyl-N,N,N-trimethylammonium bromide (CTAB), but not with those of the anionic surfactant sodium dodecyl sulfate (SDS) or the neutral surfactant Triton X-100. The reproducibility of this sensing system was shown to be excellent.     

Detection of glycosaminoglycans as a copper(II) complex in high-performance liquid chromatography

The steady state DC endocochlear potential (EP) in young chicks shows a large decrease after acoustic overstimulation followed by a rapid recovery that parallels the recovery of threshold (Poje et al., Hear. Res. 82 (1995) 197-204). These results raise a question as to whether or not the EP could account for the hearing loss and make a significant contribution to the recovery of the threshold. In contrast to results in young chicks, we show that acoustic overstimulation, which causes extensive hair cell damage, does not cause a decrease in the steady state EP in adult chickens. However, there is a significant reduction in the negative EP seen during anoxia which persists even after 4 weeks of recovery. Thus, our results indicate that the steady state EP cannot account for the hearing loss observed in adult chickens.     

Transmission Electron Microscopy-Based Analysis of Electrically Conductive Surface Defects in Large Area GaSb Homoepitaxial Diodes Grown Using Molecular Beam Epitaxy

We investigate a mechanism causing shorting of large area GaSb diodes grown on GaSb substrates using molecular beam epitaxy (MBE). The source of these shorts is determined to be large crystallographic defects on the surface of the diodes that are formed around droplets of gallium ejected from the gallium Knudsen cells during MBE. The gallium droplets cause defects in the crystal structure, and, as the epitaxy continues, the gallium is incorporated into the surrounding material. The shape of the defects is pyramidal with a central void extending from the epi-surface to the gallium core. Processing a GaSb diode with these surface defects results in the top-side contact metal migrating into the defect and shorting the diode. This prevents realization of large area diodes that are critical to applications such as photovoltaics and detectors. The diodes in this study are electrically characterized and the defect formation mechanism is investigated using cross-section transmission electron microscopy and electron dispersive spectroscopy.     

Finite-element calculation of leakage inductances of a saturated salient-pole synchronous machine with damper circuits

It is important to understand the relationship between leakage flux distributions and machine characteristics for better design of synchronous machines. This paper presents a calculation method for leakage inductances of saturated salient-pole machines with damper circuits. All leakage inductances are divided into the self-leakage, gap leakage, and winding-differential leakage inductances. The leakage inductances correspond directly to the leakage flux distributions in the machines. Cross-magnetizing inductances are also calculated. The method is applied to a 300-MVA class generator. The relationship between the winding distributions, flux distributions, saturation, and inductances is discussed. Weak magnetic influence of the damper circuits on the armature in the d-axis is quantitatively illustrated through values of the winding-differential leakage inductances. The cross-magnetizing inductances, except for the d-axis damper circuits, are relatively large. Variations of the armature self-leakage inductances with saturation are small, and variations of the field and damper self-leakage inductances are larger.     

Effect of CO2 on layered Li1+zNi1−x−yCoxMyO2 (M = Al,Mn) cathode materials for lithium ion batteries

We investigated the effect of CO₂ on layered Li_1+zNi_1−x−yCo_xM_yO₂ (M = Al, Mn) cathode materials for lithium ion batteries which were prepared by solid-state reactions. Li_1+zNi_(1−x)/2Co_xMn_(1−x)/2O₂ (Ni/Mn mole ratio = 1) singularly exhibited high storage stability. On the other hand, Li_1+zNi_0.80Co_0.15Al_0.05O₂ samples were very unstable due to CO₂ absorption. XPS and XRD measurements showed the reduction of Ni³⁺ to Ni²⁺ and the formation of Li₂CO₃ for Li_1+zNi_0.80Co_0.15Al_0.05O₂ samples after CO₂ exposure. SEM images also indicated that the surfaces of CO₂-treated samples were covered with passivation films, which may contain Li₂CO₃. The relationship between CO₂-exposure time and CO₃²⁻ content suggests that there are two steps in the carbonation reactions; the first step occurs with the excess Li components, Li₂O for example, and the second with LiNi_0.80Co_0.15Al_0.05O₂ itself. It is well consistent with the fact that the discharge capacity was not decreased and the capacity retention was improved until the excess lithium is consumed and then fast deterioration occurred.     

Designing a cellular manufacturing system considering decision style,skill and job security by NSGA-II and response surface methodology

Cell formation is a traditional problem in cellular manufacturing systems that concerns the allocation of parts, operators and machines to the cells. This paper presents a new mathematical programming model for cell formation in which operators’ personality and decision-making styles, skill in working with machines, and also job security are incorporated simultaneously. The model involves the following five objectives: (1) minimising costs of adding new machines to and removing machines from the cells at the beginning of each period, (2) minimising total cost of material handling, (3) maximising job security, (4) minimising inconsistency of operators’ decision styles in cells and (5) minimising cost of suitable skill. On account of the NP-hard nature of the proposed model, NSGA-II as a powerful meta-heuristic approach is used for solving large-sized problems. Furthermore, response surface methodology (RSM) is used for tuning the parameters. Lastly, MOPSO and two scalarization methods are employed for validation of the results obtained. To the best of our knowledge, this is the first study that presents a multi-objective mathematical model for cell formation problem considering operators’ personality and skill, addition and removal of machines and job security.     

Simulation of rubber isostatic pressing and shape optimization of rubber mold

An elastic–plastic FEM is developed to study the fundamental features of rubber isostatic pressing of powder with a view to performing a net-shape process. Experiments are also performed. It is thus shown that the properties of the rubber, in particular Poisson's ratio, give a great influence on the shape of compact and density distribution. The thickness of the rubber mold is also influential; the thicker the mold, the closer is the shape of compact to the cavity shape. An optimization scheme is also developed, so that one is able to determine the cavity shape that gives a desired shape of compact.     

Inhibition of vascular endothelial growth factor prevents retinal ischemia-associated iris neovascularization in a nonhuman primate

The antiestrogenic drug tamoxifen induces liver tumors in rats by a genotoxic mechanism. The key step has been proposed to be the formation of a reactive carbocation from the metabolite alpha-hydroxytamoxifen. This compound reacts with DNA in vitro to a small extent (1 in 10(5) DNA bases), giving products identical to those found in rat liver cells treated with tamoxifen. Now we have prepared the more reactive alpha-acetoxytamoxifen, which reacts with DNA in vitro to a much greater extent (1 in 50 bases). The products of this reaction were subjected to 32P postlabeling and shown by both TLC and reverse-phase liquid chromatography to be identical to those isolated from DNA treated with alpha-hydroxytamoxifen and to those found in the liver DNA of rat hepatocytes treated with tamoxifen or of the livers of rats treated with tamoxifen. The major product was also isolated as the nucleoside and characterized by UV, mass, and proton magnetic resonance spectroscopy. It is an adduct of tamoxifen and deoxyguanosine in which the alpha position of tamoxifen is linked covalently to the exocyclic amino group of deoxyguanosine.     

Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

Calculation of the Characteristics of Salient‐Pole Synchronous Machines Assisted by Permanent Magnets on the Basis of the Operating Principle

In this study we investigate a method for accurately calculating the characteristics of salient‐pole synchronous machines assisted by permanent magnets. First, the operating principle of the machines is investigated by using both finite element analysis and a simple magnetic circuit. Then, a theoretical representation of the assist effect on the permanent magnets is derived based on the magnetic circuit. Finally, the measured and calculated results are compared in order to confirm the validity of the proposed calculation method. We show that the load characteristics of the proposed machine can be accurately estimated from the no‐load and short‐circuit characteristics of the conventional machine without permanent magnets, and the size and magnetization of the inserted permanent magnets.