Synthesis of Amorphous Boron Nitride by Pressure Pyrolysis of Borazine

Amorphous BN that contains hydrogen could be synthesized by pressure pyrolysis of borazine below 700°C at 100 MPa. The fraction of B and N bonded to H in the pyrolysis product could be controlled by changing the pressure pyrolysis condition. The pyrolysis product at 700°C and 100 MPa showed formation of B-N-B bonds of the hexagonal structure in the amorphous state with some B-H and N-H bonding remaining. Spherulitic BN could be prepared only by pyrolysis below 400°C and 100 MPa. The yield of amorphous BN from borazine was as high as about 60% by this pressure pyrolysis. Amorphous BN formed from borazine could be readily converted to cubic BN by reacting it with AIN at 1200°C and 6.5 GPa.     

Preparation of yttrium-90-labeled human macroaggregated albumin for regional radiotherapy

Helicobacter pylori and non-steroidal anti-inflammatory drugs are two of the most common causes of peptic ulceration. The aim of this review is to assess the possible inter-relationships between Helicobacter pylori and non-steroidal anti-inflammatory drugs in the pathogenesis of gastric and duodenal erosions and ulcers, with the aim of assessing if the presence of Helicobacter pylori is likely to increase the likelihood of non-steroidal anti-inflammatory drug-related gastroduodenal symptoms and lesions, and if eradication of Helicobacter pylori may reduce or prevent non-steroidal anti-inflammatory drug lesions. There appears to be more likelihood of dyspeptic symptoms in patients on long-term non-steroidal anti-inflammatory drugs when Helicobacter pylori is present. The balance of evidence also suggests that peptic ulcers and erosions in patients on long-term non-steroidal anti-inflammatory drugs may be more likely to occur in patients who are Helicobacter pylori positive compared to those who are Helicobacter pylori negative. Although Helicobacter pylori and non-steroidal anti-inflammatory drugs both increase the risk of peptic ulcer bleeding, the risk does not appear to be additive. There is increasing evidence from prospective studies that eradication of Helicobacter pylori may reduce the incidence of ulcers in patients on non-steroidal anti-inflammatory drugs. More prospective long-term studies are required. If Helicobacter pylori is confirmed to be a factor in this respect, it will aid in the targeting of patients at greatest risk of developing ulcers in patients on long-term non-steroidal anti-inflammatory drugs. Those at greatest risk are elderly patients, especially females, smokers, patients with a previous ulcer history, severe or debilitating arthritis or who have other chronic diseases. The addition of Helicobacter pylori to this list and its subsequent eradication may improve the outlook for these patients and help in the effective targeting of patients at greatest risk who are on long-term non-steroidal anti-inflammatory drugs.     

Effect of molecular weight distribution of mineral oils on their boiling heat transfer behaviour

The range of molecular weight distribution of mineral oils has a significant effect on lubrication because it affects the thermal behaviour of the mineral oils.In view of the fact that boiling heat transfer is one of the most typical problems relevant to thermal phenomena, an investigation of boiling heat transfer from a horizontal platinum wire to mineral oils was carried out using (i) base oils characterized by narrow-range molecular weight distributions and (ii) blended oils characterized by wide-range distributions.The objective of the present study is to clarify the relationship between the range of molecular weight distribution and the boiling heat transfer behaviour of such oils.The results obtained show marked differences between base and blended oils in their boiling heat transfer behaviour, especially with respect to the heat transfer coefficients.An explanation of these differences was attempted in terms of correlation with the results of the present authors' previous investigations of the evaporation and spreading behaviour of droplets of these oils on a horizontal heating surface, both of which showed the essential differences between the base and blended oils in the heat and mass transfer properties.     

Carbon-coated stainless steel as PEFC bipolar plate material

Stainless steel is quite attractive as bipolar plate material for polymer electrolyte fuel cells (PEFCs). Passive film on stainless steel protects the bulk of it from corrosion. However, passive film is composed of mixed metal oxides and causes a decrease in the interfacial contact resistance (ICR) between the bipolar plate and gas diffusion layer. Low ICR and high corrosion resistance are both required. In order to impart low ICR to stainless steel (SUS304), carbon-coating was prepared by using plasma-assisted chemical vapor deposition. Carbon-coated SUS304 was characterized by Raman spectroscopy and atomic force microscopy. Anodic polarization behavior under PEFC operating conditions (H₂SO₄ solution bubbled with H₂ (anode)/O₂ (cathode) containing 2 ppm HF at 80 °C) was examined. Based on the results of the ICR evaluated before and after anodic polarization, the potential for using carbon-coated SUS304 as bipolar plate material for PEFC was discussed.     

Preparation of Al-doped ZnO transparent electrodes suitable for thin-film solar cell applications by various types of magnetron sputtering depositions

In order to determine the influence of different types of magnetron sputtering (MS) depositions on the characteristics of Al-doped ZnO (AZO) thin films appropriate for applications as transparent electrodes in thin-film solar cells, transparent conducting AZO thin films were prepared on glass substrates at 200 °C by direct current (dc) magnetron sputtering (dc-MS), radio frequency (rf)-MS and rf power superimposed dc-MS (rf + dc-MS) depositions using an MS apparatus with the same AZO target. AZO thin films prepared by an rf + dc-MS deposition exhibited both a higher deposition rate than that found with rf-MS depositions and a lower resistivity or higher Hall mobility than those found with dc-MS. The lower dc sputter voltage featured in rf-MS and rf ± dc-MS depositions, producing smoother surface morphology and better crystallinity than obtained with dc-MS depositions. The light scattering characteristics of surface-textured AZO thin films prepared by various types of MS depositions were evaluated by observing the surface texture and measuring the optical transmittance and the diffusive component; wet-chemical etching of the thin film surface was performed in a 0.1% HCl solution. The obtainable haze property in the range from visible to near infrared in AZO films prepared by an rf + dc-MS deposition was markedly better than that obtained with dc-MS depositions.     

Formulation study of topically applied O/W lotion containing vitamin D3 derivative, focusing on skin permeability of the drug

Permeation of 22-oxacalcitriol-1α, 25-dihydroxyvitamin D(3) (OCT) through excited hairless mouse skin was determined after application of OCT as solutions and O/W lotions consisted of different polarities of solvents: medium-chain fatty acid triglyceride (MCT), myristate isopropyl (IPM), 1,3-butylene glycol (1,3-BG), and propylene glycol (PG). OCT concentration in skin was also followed after applying these formulations. A two-layer diffusion model was composed to analyze dermatopharmacokinetic profiles of OCT for each vehicle. In the OCT solutions, skin permeation profile of OCT differed depending on solvent polarity. The O/W lotion with a high MCT content led to a low amount of OCT in skin. On the other hand, the O/W lotion with a high 1,3-BG content led to a high amount of OCT in skin. This dermatopharmacokinetic analysis indicated that addition of MCT to the formulation decreases the skin/vehicle partition coefficient of OCT and increases the diffusion coefficient of OCT in skin. However, the opposite effects on these two parameters were found in the case of 1,3-BG. Thus, skin permeability of OCT differed depending on the solvents used in the formulation. These results indicate that skin permeability of OCT is influenced by the physicochemical properties (i.e. polarity) of OCT, solvent, and skin. Our findings on the solvent effects of the skin permeability of OCT are thus useful for designing topical drug formulation, especially in aiming for bioequivalent dosage formulas.     

Family M42 aminopeptidase from the syntrophic bacterium Symbiobacterium thermophilum: characterization using recombinant protein

The chromosomal DNA of the syntrophic thermophile Symbiobacterium thermophilum contains open reading frames of the genes encoding family M42 aminopeptidases, Pep1079, Pep1080, and Pep1081. To characterize these peptidases, the genes were cloned into Escherichia coli and overexpressed. Our experiments using the recombinant proteins confirmed that Pep1079, Pep1080, and Pep1081 are components of arginyl or lysinyl aminopeptidases that require Co2+ for enzymatic activity. Coexistence of Pep1079 and Pep1080 is necessary for expressing high peptidase activity. Pep1081 enhances the activity of Pep1079 and Pep1080.     

Liquefaction and dechlorination of hydrothermally treated waste mixture containing plastics with glass powder

Additive effects of glass powder upon the product yields and chlorine distribution after liquefaction of hydrothermally pretreated mixed waste (HMW) are compared with liquefaction of HMW with any one of water, quartz sand, or glass powder plus water. As a result, addition of either water or quartz sand did not affect liquefaction and dechlorination of HMW. Further, water (5 g) addition did not enhance liquefaction and dechlorination of HMW with glass powder. On the other hand, after liquefaction of HMW with glass powder, the yields of chlorine in the gas and water insoluble constituents decreased and the chlorine yield in the water-soluble constituent increased significantly. Because sodium in glass powder dissolved in a small amount (0.5 g) of water resulted from dehydration of HMW during liquefaction. Further, hydrogen chloride derived from polyvinylchloride in HMW was neutralized by ion exchange between H(+) and Na(+) dissolved in a small amount of water forming NaCl in the Residue (water-soluble) constituent. Therefore, most of chlorine in HMW was removed easily by water extraction of the Residue constituent after liquefaction of HMW with glass powder. Further, upgrading of HMW into the oil constituent was enhanced due to inhibition of production of chlorine containing organic compounds. Accordingly, it was clarified that glass powder was the most effective additive for liquefaction and dechlorination of HMW.     

Utilization of adzuki bean extract as a natural antioxidant in cured and uncured cooked pork sausages

A commercial adzuki bean extract (AE) was evaluated for antioxidant effectiveness in cured and uncured cooked pork sausages. TBARS values, instrumental color evaluation and sensory panel scores were assessed. For uncured sausages, AE at 0.2% was equally effective as 0.1% butylated hydroxytoluene (BHT) in reducing TBARS values. Similarly, AE at 0.2% significantly (P<0.01) reduced the TBARS in cured sausages. Incorporation of 0.2% AE into sausages produced higher (P<0.05) CIE lab color a* value and lower (P<0.05) L* and b* values. Sensory panels did not detect any difference in color, odor, taste, flavor, and overall acceptance in uncured pork sausages with addition of 0.2% AE. However, there were adverse changes in the color and odor of cured sausages, even though the taste, flavor, and overall acceptance were similar. Therefore, the results suggest that AE is a potential antioxidant.     

Advanced fabrication technologies of integrated-type structure for a-Si solar cells

This paper proposes a new advanced fabrication technology for a low-cost integrated-type a-Si solar cell. Integrated-type cells provide many advantages and have been industrialized with a laser patterning method. However, a higher throughput and more efficient patterning method was required for applying a-Si solar cells to a power generating system. Plasma CVM (Chemical Vaporization Machining) was first applied to advanced patterning because of its advantages of high speed and selectivity. In this method, a plasma generated under high pressure localizes near the wire electrode and concentrates reactive radicals. As a result, we achieved an etching rate of more than 1 μm/s and selective patterning of a 200 μm-wide a-Si layer in 1 s multiline patterning was also developed for large-area modules.