Synthesis of High Density and Transparent Forsterite Ceramics Using Nano-Sized Precursors and Their Dielectric Properties

Forsterite (Mg₂SiO₄) ceramics were prepared using Mg(OH)₂ and SiO₂ as precursors, and the effect of powder characteristics of Mg(OH)₂ on calcination and sintering was investigated. The use of highly dispersed Mg(OH)₂ powder (HD powder) resulted in a lower calcination temperature. Forsterite powder of high homogeneity and small particle size prepared from the HD powder enabled synthesis of high-density forsterite ceramics by ordinary sintering without applying external pressure. Moreover, transparent forsterite ceramics were successfully synthesized through addition of excess Mg to the precursors to compensate for Mg evaporated during the sintering process. Subsequent dielectric measurements revealed that the transparent forsterite ceramics had a very low dielectric loss (tan δ<10⁻⁴).     

Intestinal absorption and biological effects of orally administered amorphous silica particles

Although amorphous silica nanoparticles are widely used in the production of food products (e.g., as anticaking agents), there is little information available about their absorption and biological effects after oral exposure. Here, we examined the in vitro intestinal absorption and in vivo biological effects in mice of orally administered amorphous silica particles with diameters of 70, 300, and 1,000 nm (nSP70, mSP300, and mSP1000, respectively) and of nSP70 that had been surface-modified with carboxyl or amine groups (nSP70-C and nSP70-N, respectively). Analysis of intestinal absorption by means of the everted gut sac method combined with an inductively coupled plasma optical emission spectrometer showed that the intestinal absorption of nSP70-C was significantly greater than that of nSP70. The absorption of nSP70-N tended to be greater than that of nSP70; however, the results were not statistically significant. Our results indicate that silica nanoparticles can be absorbed through the intestine and that particle diameter and surface properties are major determinants of the degree of absorption. We also examined the biological effects of the silica particles after 28-day oral exposure in mice. Hematological, histopathological, and biochemical analyses showed no significant differences between control mice and mice treated with the silica particles, suggesting that the silica nanoparticles evaluated in this study are safe for use in food production.     

Oxidation state of palladium as a factor controlling catalytic activity of Pd/SiO2–Al2O3 in propane combustion

The oxidation state of palladium on SiO₂–Al₂O₃ used for propane combustion was examined by XPS and XRD, and the correlation of the catalytic activity with the oxidation state of palladium was systematically studied. The propane conversion over 5 wt% Pd/SiO₂–Al₂O₃ was measured in the range 1.0≤S≤7.2 (S is defined as [O₂]/5[C₃H₈] based on stoichiometric ratio). The propane conversion strongly depended on the S value and reached the maximum at S=5.5. The oxidation state of palladium also changed with the S value; palladium particles were more oxidized under the reaction mixture of higher S value. On the sample used for the reaction at S=5.5, both of metallic palladium and palladium oxide were found. It is concluded that partially oxidized palladium which has optimum ratio of metallic palladium to palladium oxide shows the highest catalytic activity in propane combustion.     

Sources of nitrate and ammonium contamination in groundwater under developing Asian megacities

The status of nitrate (NO(3)(-)), nitrite (NO(2)(-)) and ammonium (NH(4)(+)) contamination in the water systems, and the mechanisms controlling their sources, pathways, and distributions were investigated for the Southeast Asian cities of Metro Manila, Bangkok, and Jakarta. GIS-based monitoring and dual isotope approach (nitrate delta(15)N and delta(18)O) suggested that human waste via severe sewer leakage was the major source of nutrient contaminants in Metro Manila and Jakarta urban areas. Furthermore, the characteristics of the nutrient contamination differed depending on the agricultural land use pattern in the suburban areas: high nitrate contamination was observed in Jakarta (dry fields), and relatively lower nutrients consisting mainly of ammonium were detected in Bangkok (paddy fields). The exponential increase in NO(3)(-)-delta(15)N along with the NO(3)(-) reduction and clear delta(18)O/delta(15)N slopes of NO(3)(-) ( approximately 0.5) indicated the occurrence of denitrification. An anoxic subsurface system associated with the natural geological setting (e.g., the old tidal plain at Bangkok) and artificial pavement coverage served to buffer NO(3)(-) contamination via active denitrification and reduced nitrification. Our results showed that NO(3)(-) and NH(4)(+) contamination of the aquifers in Metro Manila, Bangkok, and Jakarta was not excessive, suggesting low risk of drinking groundwater to human health, at present. However, the increased nitrogen load and increased per capita gross domestic product (GDP) in these developing cities may increase this contamination in the very near future. Continuous monitoring and management of the groundwater system is needed to minimize groundwater pollution in these areas, and this information should be shared among adjacent countries with similar geographic and cultural settings.     

Effect of humidity on human comfort and productivity after step changes from warm and humid environment

Subjective experiments were conducted to evaluate the effects of humidity on human comfort and productivity under transient conditions from hot and humid environment to thermally neutral condition. Two climate chambers, “Chamber 1” and “Chamber 2”, adjoined each other were used for this study. Subjects were exposed to 30 °C/70%RH air in Chamber 1 for 15 min with 2.0 met of metabolic rate. Then they moved into Chamber 2, where 4 humidity conditions, 30, 40, 50 and 70%RH were examined. Air temperature was adjusted to keep SET* constant at 25.2 °C for all conditions. Subjects were exposed in Chamber 2 for 180 min performing 2 kinds of simulated office work.

Positive effects of low humidity on subjective pleasantness were found under transient condition at low humidity due to more evaporation from human body, while no significant difference in thermal sensation and humidity sensation among 4 relative humidity levels was obtained. Subjective performance was found to be at the same level under all conditions. However, subjects reported to be more tired at 70%RH after humidity step change.     

Amorphous nanosilicas induce consumptive coagulopathy after systemic exposure

We previously reported that well-dispersed amorphous nanosilicas with particle size 70 nm (nSP70) penetrate skin and produce systemic exposure after topical application. These findings underscore the need to examine biological effects after systemic exposure to nanosilicas. The present study was designed to examine the biological effects. BALB/c mice were intravenously injected with amorphous nanosilicas of sizes 70, 100, 300, 1000 nm and then assessed for survival, blood biochemistry, and coagulation. As a result, injection of nSP70 caused fatal toxicity, liver damage, and platelet depletion, suggesting that nSP70 caused consumptive coagulopathy. Additionally, nSP70 exerts procoagulant activity in vitro associated with an increase in specific surface area, which increases as diameter reduces. In contrast, nSP70-mediated procoagulant activity was absent in factor XII-deficient plasma. Collectively, we revealed that interaction between nSP70 and intrinsic coagulation factors such as factor XII, were deeply related to nSP70-induced harmful effects. In other words, it is suggested that if interaction between nSP70 and coagulation factors can be suppressed, nSP70-induced harmful effects may be avoided. These results would provide useful information for ensuring the safety of nanomaterials (NMs) and open new frontiers in biological fields by the use of NMs.     

Simulation of characteristics of a SiO2/c-axis-oriented LiNbO3/diamond surface acoustic wave

High-frequency surface acoustic wave (SAW) devices based on diamond that have been realized to date utilize c-axis-oriented ZnO as the piezoelectric thin film. This material, with SiO2 overlay, shows excellent characteristics of a high phase velocity of over 10,000 m/s and a zero temperature coefficient, and it has been successfully applied to high-frequency SAW filters and resonators. To expand on materials used on diamond, the theoretical calculation has been carried out for LiNbO3/diamond, and a high electromechanical coupling coefficient up to 9.0% is expected. In this work, the characteristics of SiO2/LiNbO3/diamond were studied by computer simulation, emphasizing a zero temperature coefficient with a high coupling coefficient. Calculations are carried out for the phase velocity, the electromechanical coupling coefficient, and the temperature coefficient of the Rayleigh wave and its higher mode Sezawa wave. As a result, SiO2/IDT/LiNbO3/diamond is found to offer a zero temperature coefficient with a very high coupling coefficient up to 10.1% in conjunction with a high phase velocity of 12,100 m/s.     

Deep-ultraviolet Raman microspectroscopy: characterization of wide-gap semiconductors

We have developed a high-throughput deep-ultraviolet (DUV) Raman microspectrometer with excitation from a continuous wave (cw) laser operated at 244 nm that enables us to characterize thin surface layers of wide-gap semiconductors. This spectrometer system consists of a filter spectrometer for the rejection of stray light and a high-dispersion spectrograph combined with a liquid nitrogen cooled charge-coupled device (CCD) detector and extends the low-frequency limit of the observable spectral range down to 170 cm(-1). In the microscope we use a Cassegrain reflective objective for the collection of the scattered light and an off-axis mirror for introduction of the excitation laser light. DUV Raman spectroscopy has been applied for studying wide-gap semiconductors including SiC and AlGaN epitaxial films and shallow implanted layers of these materials. Raman spectra of various crystals have also been measured for examining the performance of this system. Resonance enhancement of Raman bands has been observed for several semiconductors, and the results are discussed.     

Experimental visualization of lithium diffusion in LixFePO4

Chemical energy storage using batteries will become increasingly important for future environmentally friendly ('green') societies. The lithium-ion battery is the most advanced energy storage system, but its application has been limited to portable electronics devices owing to cost and safety issues. State-of-the-art LiFePO4 technology as a new cathode material with surprisingly high charge-discharge rate capability has opened the door for large-scale application of lithium-ion batteries such as in plug-in hybrid vehicles. The scientific community has raised the important question of why a facile redox reaction is possible in the insulating material. Geometric information on lithium diffusion is essential to understand the facile electrode reaction of LixFePO4 (0相似文献