Finite element analysis of fracture statistics of ceramics: Effects of grain size and pore size distributions

A novel numerical simulation method based on finite element analysis (FEA), which can evaluate the fracture probability caused by the characteristics of flaw distribution, is considered an effective tool to facilitate and increase the use of ceramics in components and members. In this study, we propose an FEA methodology to predict the scatter of ceramic strength. Specifically, the data on the microstructure distribution (i.e., relative density, size and aspect ratio of pore, and grain size) are taken as the input values and reflected onto the parameters of a continuum damage model via a fracture mechanical model based on the circumferential circular crack emanating from an oval spherical pore. In addition, we numerically create a Weibull distribution based on multiple FEA results of a three‐point bending test. Its validity is confirmed by a quantitative comparison with the actual test results. The results suggest that the proposed FEA methodology can be applied to the analysis of the fracture probability of ceramics.     

Usefulness of myeloperoxidase as a biomarker for the ranking of pulmonary toxicity of nanomaterials

Background

In order to examine whether myeloperoxidase (MPO) can be a useful marker for evaluating the pulmonary toxicity of nanomaterials, we analyzed MPO protein in bronchoalveolar lavage fluid (BALF) samples obtained from previous examinations of a rat model. In those examinations we performed intratracheal instillation exposures (dose: 0.2–1.0 mg) and inhalation exposures (exposure concentration: 0.32–10.4 mg/m³) using 9 and 4 nanomaterials with different toxicities, respectively. Based on those previous studies, we set Nickel oxide nanoparticles (NiO), cerium dioxide nanoparticles (CeO₂), multi wall carbon nanotubes with short or long length (MWCNT (S) and MWCNT (L)), and single wall carbon nanotube (SWCNT) as chemicals with high toxicity; and titanium dioxide nanoparticles (TiO₂ (P90) and TiO₂ (Rutile)), zinc oxide nanoparticles (ZnO), and toner with external additives including nanoparticles as chemicals with low toxicity. We measured the concentration of MPO in BALF samples from rats from 3 days to 6 months following a single intratracheal instillation, and from 3 days to 3 months after the end of inhalation exposure.

Results

Intratracheal instillation of high toxicity NiO, CeO_2, MWCNT (S), MWCNT (L), and SWCNT persistently increased the concentration of MPO, and inhalation of NiO and CeO₂ increased the MPO in BALF. By contrast, intratracheal instillation of low toxicity TiO₂ (P90), TiO₂ (Rutile), ZnO, and toner increased the concentration of MPO in BALF only transiently, and inhalation of TiO₂ (Rutile) and ZnO induced almost no increase of the MPO. The concentration of MPO correlated with the number of total cells and neutrophils, the concentration of chemokines for neutrophils (cytokine-induced neutrophil chemoattractant (CINC)-1 and heme oxygenase (HO)-1), and the activity of released lactate dehydrogenase (LDH) in BALF. The results from the receiver operating characteristics (ROC) for the toxicity of chemicals by the concentration of MPO proteins in the intratracheal instillation and inhalation exposures showed that the largest areas under the curves (AUC) s in both examinations occurred at 1 month after exposure.

Conclusion

These data suggest that MPO can be a useful biomarker for the ranking of the pulmonary toxicity of nanomaterials, especially at 1 month after exposure, in both intratracheal instillation and inhalation exposure.

     

13.3‐inch 8k4k 664‐ppi foldable OLED display using crystalline oxide semiconductor FETs

A prototype 13.3‐inch 8k4k 664‐ppi high‐resolution foldable organic light emitting diode display is constructed. C‐axis aligned a‐b‐plane‐anchored crystal In–Ga–Zn oxide field effect transistors designed using a 1.5‐µm rule process are used in the backplane. Each pixel circuit has three transistors and one capacitor, and an external circuit is used to correct pixel current.     

Viewer,converter and preprocessor for smart machining process using an industrial robot

In this paper, viewer and converter softwares are presented for smart machining process using an industrial robot. The viewers for NC, CLS, DXF and STL files illustrate their surface representation with normal direction vectors. For example, the DXF is a data format developed by Autodesk to realize data interoperability among different makers’ CAD systems. The STL means Stereolithography which is a file format proposed by 3D Systems and recently is supported by many design tools and CAD/CAM softwares. In addition, the converters for DXF and STL files generate the corresponding CLS files with normal direction vectors for machining. Further, the proposed preprocessor allows the developed machining robot to work based on information included in STL files. The convenience and user-friendliness of the proposed integrated system are confirmed through experiments of viewing, converting and machining.     

Experimental study on mechanism of autogenous shrinkage of concrete

It was proved that autogenous shrinkage of high-strength concrete could be almost the same as drying shrinkage. For cement paste with low water-cement ratio, shrinkage was observed even in water. Existing composite low evaluated well the restraining effect of aggregate on autogenous shrinkage. Moisture movement caused by capillary condensation was thought to be the cause of flexural strength reduction for sealed specimens.     

Resource Name-Based Routing in the Network Layer

New network architectures and routing technologies are being proposed to reflect the changes in the current trend of Internet communication that are becoming more and more resource-centric; the demand for the hierarchically structured resource in the network is emphasized, not the location of the resource. Therefore, routing by the resource rather than routing by the conventional Internet protocol address is more suitable for the future Internet with some attractive advantages such as reducing the burden of resolving identifier to location and achieving higher scalability by using a provider-independent addressing structure. In this paper, we propose resource name-based routing within the routers in the network layer since te ardware architecture should also be able to support the paradigm shift from host-centric to resource-centric communication. Through evaluating the required network architecture and memory size in routers, we show the feasibility of resource name-based routing by using fully qualified domain names (FQDN) as an example of describing structured information. Using approximately 700 million existing FQDNs, the evaluation result shows that resource name-based routing is feasible even when considering the limitations of ternary content addressable memory size in routers.     

Syntheses of chemical‐modified cellulose obtained from waste pulp

Chemical‐modified pulps were synthesized from four types of waste pulps (Pulp1–4) and succinic anhydride (SAn) or maleic anhydride (MAn). The solubility of the modified pulps was evaluated in common organic solvents, and their thermal properties were investigated by DSC measurement. The solubility of the modified pulps increased with an increasing degree of substitution (DS). However, no T_g or T_m of these modified pulps was confirmed. Pulps and modified pulps were graft‐polymerized with ε‐caprolactone (CL) in bulk and in DMAc/LiCl. Although the solubility of the graft copolymers was similar to modified pulps, some graft copolymers showed a T_g by the introduction of CL units. In the bulk, graft copolymers obtained from modified pulps and nonmodified pulps showed a T_g of about 75°C and no T_g, respectively. In DMAc/LiCl, the obtained graft copolymers from both modified and nonmodified pulps exhibited a T_g of 95–110°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2059–2065, 2003     

Isotopic assessment of CO<Subscript>2</Subscript> production through soil organic matter decomposition in the tropics

Values of ¹³C and ¹⁵N of soil organic matter (SOM) under different land cover in Pasir Mayang, Jambi Province, Sumatra Island, Indonesia were examined to apply them as indicators of SOM dynamics and related CO₂ production. The ¹³C and ¹⁵N values of SOM increased with depth in the 0–30 cm layer in the preserved forest, reflecting ¹³C and ¹⁵N richment in SOM through mineralization and immobilization. The degree of vertical enrichment, difference between 0–5 cm and 10–15 cm SOM, was more pronounced in ¹⁵N than in ¹³C at all sites in Pasir Mayang. The ¹³C -SOM profiles fluctuated through clear-cutting the forest and subsequent burning, which was due to input of biomass with higher C/N molar ratio and lower ¹³C value than the original SOM. However, the ¹⁵N-SOM profiles before and after such a drastic event did not change appreciably. The ¹⁵N-SOM became higher as the C/N ratio decreased and as soil sugar content decreased. These observations suggest that ¹⁵N-SOM is a variable that changes with the amount of easily decomposable organic matter (EDOM) in soil. Soil incubation experiments demonstrated a correlation between CO₂ production rate and degree of vertical ¹⁵N-enrichment in SOM, which was applied to field data to estimate CO₂ production through SOM decomposition. A similar analysis was performed with the soils collected at 27 locations in other districts in Jambi Province than Pasir Mayang. In five locations covered by oil palm plantation, CO₂ production through SOM decomposition controlled 70 of variation in CO₂ emission among the locations. In the remaining 22 locations, however, the CO₂ emission was neither related to CO₂ production from SOM nor to ground litter amount. This observation indicated that mechanisms other than dead organic matter decomposition such as root respiration were dominant sources for CO₂ emission in these sites.     

Syntheses and biodegradability of benzylated waste pulps and graft copolymers from PBzs and L‐lactic acid

Benzylated waste pulps (PBzs) were synthesized from treated waste pulp (Pulp), and benzyl chloride with phase transfer catalyst (PTC), and graft copolymers (PBz‐g‐LA) were synthesized from PBzs and L‐lactic acid (LA). Thermal properties, solubility, crystallinity, and biodegradability of the obtained PBzs and graft copolymers were investigated. PBzs with the degree of substitution (DS) higher than 1.5 showed T_g and T_m in DSC measurement. All PBz‐g‐LA exhibited no T_m. However, the graft copolymers obtained from lower DS PBzs having no T_g, exhibited T_g. The solubility of PBzs enhanced with increasing DS, and the crystallinity of PBzs reduced with increasing DS because of hydrophobicity and steric effect of benzyl groups. The solubility of graft copolymers was similar to that of original PBzs. Biodegradation tests for PBzs, Pulp, and graft copolymers were performed using cellulase in 0.1 M acetate buffer solution (pH 5.5) at 37°C. All samples showed biodegradability though the biodegradation rate decreased with increasing DS of PBz. In PBz‐g‐LA, the initial biodegradation rate was faster than that of original PBz because of hydrolysis of LA units. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2658–2664, 2004     

Development and motion control of a biped walking robot based on passive walking theory

This research aims to develop the biped walking robot that can walk on the horizontal ground and improve walking efficiency by utilizing the theory of the passive walking robot, namely the pendulum principle. For that, two motors were installed on the hip of the robot to generate the control torques to perform a walking motion. The computer simulations with dynamic model were carried out to investigate the walking capability of the system. Experimental robot was developed considering the calculated results. The proportional control law was used in walking experiment. The robot can walk on the horizontal ground with the proposed method.