Electrical and thermal conduction in atomic layer deposition nanobridges down to 7 nm thickness

While the literature is rich with data for the electrical behavior of nanotransistors based on semiconductor nanowires and carbon nanotubes, few data are available for ultrascaled metal interconnects that will be demanded by these devices. Atomic layer deposition (ALD), which uses a sequence of self-limiting surface reactions to achieve high-quality nanolayers, provides an unique opportunity to study the limits of electrical and thermal conduction in metal interconnects. This work measures and interprets the electrical and thermal conductivities of free-standing platinum films of thickness 7.3, 9.8, and 12.1 nm in the temperature range from 50 to 320 K. Conductivity data for the 7.3 nm bridge are reduced by 77.8% (electrical) and 66.3% (thermal) compared to bulk values due to electron scattering at material and grain boundaries. The measurement results indicate that the contribution of phonon conduction is significant in the total thermal conductivity of the ALD films.     

Promotion Effect of FeOx Addition on the Catalytic Activity of Supported Cu Catalysts for the Water–gas Shift Reaction

Among the supported Cu–FeO_x catalysts, Al₂O₃-supported Cu–FeO_x catalyst exhibited the highest activity for WGS reaction. The enhancement of the catalytic activity by adding FeO_x to Cu/Al₂O₃ could be interpreted by the two possibilities; one is the formation of highly dispersed Cu⁰ and the other is the participation of reduced FeO_x in WGS reaction in the presence of Cu⁰.     

Severe ethanol stress induces assembly of stress granules in Saccharomyces cerevisiae

Stress granules (SGs) and processing bodies (P bodies) are cytoplasmic domains and play a role in the control of translation and mRNA turnover in mammalian cells subjected to environmental stress. Recent studies have revealed that SGs also form in the budding yeast Saccharomyces cerevisiae in response to glucose depletion and robust heat shock. However, information about the types of stress that cause budding yeast SGs is quite limited. Here we demonstrate that severe ethanol stress generates budding yeast SGs in a manner independent of the phosphorylation of eIF2α. The concentration that generated budding yeast SGs (>10%) was higher than that causing P bodies (>6%), and P bodies were assembled prior to SGs. As well as mammalian SGs, the assembly of budding yeast SGs under ethanol stress was blocked by cycloheximide. On the other hand, the budding yeast SGs caused by ethanol stress contained eIF3c but not eIF3a and eIF3b, although the eIF3 complex is a core constituent of mammalian SGs. Moreover, null mutants (pbp1Δ, pub1Δ and tif4632Δ) with a strong reduction in SG formation did not resume proliferation after the elimination of ethanol stress, indicating that the formation of budding yeast SGs might play a role in sufficient recovery from ethanol stress.     

Evolving graph‐based chromosome by means of variable size genetic network programming with binomial distribution

Genetic network programming (GNP) is a graph‐based evolutionary algorithm with fixed size, which has been proven to solve complicated problems efficiently and effectively. In this paper, variable size genetic network programming (GNPvs) with binomial distribution has been proposed, which will change the size of the individuals and obtain their optimal size during evolution. The proposed method will select the number of nodes to move from one parent GNP to another parent GNP during crossover to implement the new feature of GNP. The probability of selecting the number of nodes to move satisfies a binomial distribution. The proposed method can keep the effectiveness of crossover, improve the performance of GNP, and find the optimal size of the individuals. The well‐known testbed Tileworld is used to show the numerical results in the simulations. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

An extended probabilistic model building genetic network programming using both of good and bad individuals

Classical estimation of distribution algorithms (EDAs) generally use truncation selection to estimate the distribution of the good individuals while ignoring the bad ones. However, various researches in evolutionary algorithms (EAs) have reported that the bad individuals may affect and help solving the problem. This paper proposes a new method to use the bad individuals by studying the substructures rather than the entire individual structures to solve reinforcement learning (RL) problems, which generally factorize their entire solutions to the sequences of state–action pairs. This work was studied in a recent graph‐based EDA named probabilistic model building genetic network programming (PMBGNP), which could solve RL problems successfully, to propose an extended PMBGNP. The effectiveness of this work is verified in an RL problem, namely robot control. Compared to other related work, results show that the proposed method can significantly speed up the evolution efficiency. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Enzymatic Properties of β‐1,3‐Glucanase from Streptomyces sp Mo.

Streptomyces sp Mo endo‐β‐1,3‐glucanase was found to have hydrolyzing activity toward curdlan and released laminarioligosaccharides selectively. The molecular weight was estimated to be 36000 Da and its N‐terminal amino acid sequence was VTPPDISVTN. The optimal pH was 6 and the enzyme was found to be stable from pH 5 to 8. The optimal temperature was 60 °C and the activity was stable below 50 °C. The enzyme hydrolyzed selectively curdlan containing only β‐1,3 linkages. The enzyme had 89% relative activity toward Laminaria digitata laminarin, which contains a small amount of β‐1,6 linkages compared with curdlan, while Eisenia bicyclis laminarin with a higher amount of β‐1,6‐linkages, was not hydrolyzed. Mo enzyme adsorbed completely on curdlan powder. The enzymatic hydrolysis of curdlan powder resulted in the accumulation of laminaribiose (yield 81.7%). Trisaccharide was inevitably released from the hydrolysis of laminarioligosaccharides with 5 to 7 degrees of polymerization (DP). Although the enzyme cleaved off disaccharide (DP 2) from tetrasaccharide (DP 4), the reaction rate was lower than those of DP 5 to 7. The results indicated that the active site of Mo endo‐β‐1,3‐glucanase can efficiently recognize glucosyl residue chain of greater than DP 5 and hydrolyzes the β‐1,3 linkage between the 3rd and 4th glucosyl residue.     

Clarification of strain limits considering the ratcheting fatigue strength of 316FR steel

The effect of ratcheting on fatigue strength was investigated in order to rationalize the strain limit as a design criterion of commercialized fast reactor systems. Ratcheting fatigue tests were conducted at 550 °C. Duration of the ratchet straining was set for a certain number of strain cycles taking the loading condition of fast reactors into account, and the number of cycles for strain accumulation was defined as the ratchet-expired cycle. Fatigue lives decrease as the accumulated strain by ratcheting increases. Mean stress increased during the ratcheting cycle and its maximum value depended on the accumulated strain and the ratchet-expired cycle. Fatigue life reduction was negligible when the maximum mean stress was less than 25 MPa, corresponding to an accumulated strain of 2.2%. Accumulated strain is limited to 2% in the present design guidelines and this strain limit is considered effective to avoid reducing fatigue life by ratcheting. Microcrack growth behaviors were also investigated in these tests in order to discuss the life reduction mechanisms in ratcheting conditions.     

Mixing mechanism of three‐tip kneading block in twin screw extruders

In recent years, twin screw extruders have been applied to various kinds of polymer processing. It has been important to find their optimum geometrical configurations and operational processing conditions for the best performance of extrusions and products. Many engineers have been evolving numerical and the experimental methods to characterize the mixing performance for twin screw extruders. We have carried out three‐dimensional flow simulations of kneading blocks in intermeshing co‐rotating twin screw extruders by using the finite element method to quantify their ability in distributive and dispersive mixing. We discuss their performance in distributive mixing for three different type of kneading blocks in terms of the residence time distribution and the nearest distance between markers at various periods of time, by using the marker tracking method. Those numerical techniques and applications of mixing indices have enabled us to quantify and evaluate their abilities in distributive mixing of kneading blocks in twin screw extruders.     

Lubrication performance of multialkylatedcyclopentane oils for sliding friction of steel under vacuum condition

Sliding friction experiments under vacuum lubricated with additive-free multialkylatedcyclopentane (MAC) were carried out using a ball-on-disc tribometer with 440C stainless steel as the material of the specimen. Antiwear characteristics of additive-free MAC during the steady friction region under vacuum were shown to be better than those of perfluoropolyether (PFPE). However, it was found that the friction coefficient lubricated with the additive-free MAC under vacuum showed an initial seizure-like high friction of approximately 0.2 at the beginning of the test, followed by a steady low friction of approximately 0.1. It was also found in contrast that PFPE did not show the initial seizure-like high friction but maintained a lower friction coefficient than 0.1 throughout the experiment. The initial high wear volume lubricated with the additive-free MAC was found to be related to the initial seizure-like high friction. The tricresylphosphate formulation prevented the initial seizure-like high friction. Copyright © 2007 John Wiley & Sons, Ltd.