Influence of Acid Modification on Selective Phenol Hydrogenation Over Pd/Activated Carbon Catalysts

The influence of the acid treatment on cyclohexanone selectivity of phenol hydrogenation over Pd on active carbon was studied in liquid phase reaction and by temperature-programmed desorption. Acid treatment of activated carbon led to an increased cyclohexanone/cyclohexanol ratio. Acid modification of the carbon support enriched the electron density of Pd, and enhanced the desorption of the phenoxy species, which resulted in improved cyclohexanone selectivity in phenol hydrogenation.     

Study on effects of solar radiation and rain on shrinkage, shrinkage cracking and creep of concrete

In this paper, the effects of actual environmental actions on shrinkage, creep and shrinkage cracking of concrete are studied comprehensively. Prismatic specimens of plain concrete were exposed to three sets of artificial outdoor conditions with or without solar radiation and rain to examine the shrinkage. For the purpose of studying shrinkage cracking behavior, prismatic concrete specimens with reinforcing steel were also subjected to the above conditions at the same time. The shrinkage behavior is described focusing on the effects of solar radiation and rain based on the moisture loss. The significant environment actions to induce shrinkage cracks are investigated from viewpoints of the amount of the shrinkage and the tensile strength. Finally, specific compressive creep behavior according to solar radiation and rainfall is discussed. It is found that rain can greatly inhibit the progresses of concrete shrinkage and creep while solar radiation is likely to promote shrinkage cracking and creep.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Structure and properties of poly(vinyl alcohol)/κ‐carrageenan blends

Blends of a commercial atactic poly(vinyl alcohol) (a‐PVA) derived from vinyl acetate and κ‐carrageenan were prepared by mixing the aqueous solutions of both samples. Blend films prepared by casting were transparent. In the DSC curves of the blend films, the endothermic peaks shifted to lower temperature with an increase of the content of κ‐carrageenan. The Young's modulus and the strength at break increased with an increase of the content of a‐PVA. As the standing temperature of the blend solutions decreased, the gelation region increased also at high content of carrageenan. In the amorphous regions of blend films, a‐PVA and κ‐carrageenan were miscible. © 2001 Society of Chemical Industry     

Demand forecasting for production planning in remanufacturing

The International Journal of Advanced Manufacturing Technology - Remanufacturing is effective for energy and material savings; however, production planning and control in remanufacturing are more...     

Mixing mechanism of three‐tip kneading block in twin screw extruders

In recent years, twin screw extruders have been applied to various kinds of polymer processing. It has been important to find their optimum geometrical configurations and operational processing conditions for the best performance of extrusions and products. Many engineers have been evolving numerical and the experimental methods to characterize the mixing performance for twin screw extruders. We have carried out three‐dimensional flow simulations of kneading blocks in intermeshing co‐rotating twin screw extruders by using the finite element method to quantify their ability in distributive and dispersive mixing. We discuss their performance in distributive mixing for three different type of kneading blocks in terms of the residence time distribution and the nearest distance between markers at various periods of time, by using the marker tracking method. Those numerical techniques and applications of mixing indices have enabled us to quantify and evaluate their abilities in distributive mixing of kneading blocks in twin screw extruders.     

Design of a single-mode tapered waveguide for low-losschip-to-fiber coupling

The novel waveguide structures described in this paper have nonlinearly tapered shapes that result in low radiation losses despite their relatively short lengths. The core at the waveguide endface connected with the fiber has a very small cross section and an expanded mode field with a non-Gaussian shape. The taper structures are analyzed by using an improved step-transition method. This method is a based on the theory of enclosing a waveguide within electrical walls and that can therefore treat the radiation modes in a tapered waveguide as discrete mode spectra. Analyzing the relationships between the lengths and shapes of the tapers and the radiation loss due to the tapers show that appropriately tapered semiconductor waveguides operating at an optical wavelength of 1.55 μm and having a taper length of less than 0.7 mm can have a radiation loss of only 0.1 dB and a coupling loss with a conventional single-mode fiber of less than 0.5 dB     

Controlled radical polymerization with polyolefin macroinitiator: a convenient and versatile approach to polyolefin-based block and graft copolymers

This paper introduces the new synthetic methodology of polyolefin-based block and graft copolymers with polar segments [e.g., polystyrene and poly(meth)acrylates]. Various brominated polyolefins were prepared by bromination of polyolefins with N-bromosuccinimide. The resulting brominated polyolefins were able to initiate the controlled radical polymerization of polar monomers, such as methyl methacrylate, ethyl acrylate, t-butyl acrylate, styrene and 2-(dimethylamino)ethyl acrylate, using a CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine catalyst system, leading to a variety of polyolefin-based copolymers with a different content of the corresponding polar segment. Because of the accessible synthesis of polyolefin macroinitiators, this synthetic methodology is expected to result in the preparation of a wide range of polyolefin-based block and graft copolymers.     

First-Principles Investigation of the Atomic and Electronic Structures of α-Al2O3(0001)/Ni(111) Interfaces

Atomic and electronic structures of α-Al₂O₃(0001)/Ni(111) interfaces have been investigated using the first-principles pseudopotential method. Models with different rigid-body translations parallel to the interface for both the O-terminated and Al-terminated interfaces are examined in order to clarify the overall features. Results indicate that the interface stoichiometry as well as the interface configuration has significant effects on the adhesive and electronic properties. The bonding nature of the O-terminated interfaces is explained by strong ionic and Ni-3d/O-2p orbital hybridization interactions, and that of the Al-terminated interfaces is explained mainly by image-charge like electrostatic and Ni–Al hybridization interactions, although there is some Ni–O hybridization for the O-site model. Orbital hybridization and adhesive energies are larger than those in the corresponding Al₂O₃/Cu interfaces, because Ni has higher activity for making bonds with ceramics than Cu.