Application of the Solvothermal Process in the Synthesis of High-performance Ag/γ-Al_2O_3 Catalysts

1 INTRODUCTION Since Cu-ZSM-5 was reported as an effective catalyst for the selective catalytic reduction (SCR) of NO by hydrocarbons in the presence of excess oxygen, the SCR of NOx has received much attention as a kind of potential technology for cleaning NOx in various oxygen-rich exhausts of diesel engine, lean burning gasoline engine and gas engine. Although a number of catalysts have been tested, to date, it still seems to be difficult to find a catalyst that is completely suit…     

The effects of amino-acid mutations on specific interactions between urokinase-type plasminogen activator and its receptor: Ab initio molecular orbital calculations

During cancer invasion, the binding of urokinase-type plasminogen activator (uPA) to its receptor (uPAR) on the surface of a cancer cell is considered a trigger for invasion. Here, we present a stable structure of the solvated complex formed between uPA and uPAR (uPA-uPAR) and investigate the specific interactions between uPA and uPAR by ab initio fragment molecular orbital (FMO) calculations. The result indicates that the electrostatic interactions between the charged amino acid residues existing in both uPA and uPAR make a large contribution to the binding between uPA and uPAR. In particular, Lys23, Lys46, Lys98 and Lys61 of uPA are found to have strong attractive interactions with uPAR. To elucidate the effect of these residues on the interactions between uPA and uPAR, we substituted each of them with the uncharged amino acid Leu and investigated the interactions between the mutated uPA and wild-type uPAR. The interaction energies indicate that Lys46 and Lys98, which bind uPA to the rim of the central ligand-binding cavity of uPAR, make greater contributions to the binding between uPA and uPAR than Lys23, which is positioned at the bottom of the ligand-binding cavity of uPAR. The effect of hydrating water molecules located between uPA and uPAR is also investigated to be significant for the specific interactions between uPA and uPAR. These results are expected to be informative for developing new peptide antagonists that block the binding of uPA to uPAR.     

Damage to seagrass and seaweed beds in Matsushima Bay,Japan, caused by the huge tsunami of the Great East Japan Earthquake on 11 March 2011

Damage to seagrass and seaweed beds caused by the huge tsunami of the Great East Japan Earthquake on 11 March 2011 was investigated in Matsushima Bay, Miyagi Prefecture, Japan, by comparing satellite images taken before the tsunami in November 2009 and after the tsunami in May 2011. The results showed that the tsunami destroyed 220 ha of seagrass and seaweed beds, from 320 ha in 2009 to 100 ha just after the tsunami. Zostera marina beds on the sandy and muddy bottom were rather severely damaged compared with brown seaweed beds of Sargassum horneri on the rocky substrate. Substrates of the beds and directions of the tsunami seem to be responsible for the magnitude of the damage to the beds. Maps of the spatial distributions of the beds before and after the tsunami can provide information for the restoration of seagrass and seaweed beds as natural infrastructures of coastal fisheries resources.     

Fabrication of semi-transparent superoleophobic thin film by nanoparticle-based nano–microstructures on see-through fabrics

Superoleophobic thin films have many potential applications including fluid transfer, fluid power systems, stain-resistant and antifouling materials, and microfluidics. Transparency is also desired with superhydrophobicity for numerous applications; however, transparency and oleophobicity are almost incompatible with each other from the point of view of surface structure. Oleophobicity requires a rougher structure on the nano–microscale than hydrophobicity, and this rough structure brings light scattering. So far, there are few reports of compatible transparency and superoleophobicity. In this report, we propose see-through-type fabrics having nanoparticle-based hierarchical structure thin films to improve both oleophobicity and transparency. The vacant space between the fibers of the fabric has two important roles: to allow light to pass through and to induce an air layer to produce a Cassie state of a liquid droplet on the resulting thin film. To realize a low surface energy and nanoscale rough structured surface on fabric fibers, we used a spray method with perfluoroalkyl methacrylic copolymer, silica nanoparticles, and volatile solvent. Scanning electron microscopy images revealed that hierarchical nanoparticle structures were uniformly formed on the fabrics. The transparency of the obtained thin film was approximately 61 %, and the change of transparency between the non-coated and coated fabrics was 11 %. The contact angles of oil (rapeseed oil and hexadecane) and water droplets on the fabricated film were observed to be over 150° during investigation of its surface wettability.     

Finite Element Analysis of Precursors to Macroscopic Stick–Slip Motion in Elastic Materials: Analysis of Friction Test as a Boundary Value Problem

In this study, we apply the finite element method to investigate precursor to frictional sliding phenomena arising immediately prior to macroscopic stick–slip transitions in elastic bodies within the framework of a continuum theory. Using a numerical model that mimics an actual experimental system, we study the behavior of contact surface nodes to assess the influence of stiffness, driving velocity, initial conditions, and discretization conditions on the propagation characteristics of microscopic slips. In particular, we show that the initial distribution of frictional stress arising due to the Poisson effect has a significant effect on the propagation characteristics in slip regions. Next, based on the results of a finite element analysis of precursor phenomena that accounts for the influence of bulk compliance, we consider the determination of parameters in rate-dependent friction models. With regard to the behavior of sliding friction, we show that the relationship between friction tests and friction models is fundamentally different from the relationship between material tests and constitutive models for material deformation. We conclude that a proper understanding and classification of friction tests, friction models, and the relationship between these tests and boundary value problems are crucial ingredients in the application of computer-aided engineering techniques to sliding-friction phenomena; indeed, friction tests must ultimately be treated as boundary value problems.     

Validating the usefulness of examiners’ forward citations from the viewpoint of applicants’ self-selection during the patent application procedure

In this study, we validated the usefulness of examiners’ forward citations, especially from the viewpoint of the applicants’ self-selection (ASS) decisions during the patent application procedure. We believe that the ASS in an early stage would be decided by a potential-value comparison among patent applications. We focused on six self-selection decision points of the applicants: whether to file patent applications in foreign countries, request for examination, request for accelerated examination, reply to a notification of reasons for refusal, appeal after receiving a decision of refusal, and register after receiving a decision to grant a patent as patent value parameters. We found that application groups that selected “Yes” have a significantly larger number of examiners’ forward citations than groups that selected “No” at all decision points. In addition, we confirmed that applications that were finally granted and those that were renewed for a full term after grant have a significantly large number of examiners’ forward citations. We concluded that the number of examiners’ forward citations would be a useful indicator of the potential value of patent applications in macroscopic analysis.     

High-melt-strength polypropylene with electron beam irradiation in the presence of polyfunctional monomers

High-melt-strength polypropylene (PP) was achieved with irradiation by an electron beam generated from an accelerator in the presence of polyfunctional monomers (PFM). Among 16 PFMs, the relatively shorter molecular chain bifunctional monomers such as 1,4-butanediol diacrylate (BDDA) and 1,6-hexanediol diacrylate (HDDA) were the most effective for enhancing the melt strength of PP. The concentration and dose of the HDDA to obtain the high melt strength PP in irradiation under nitrogen gas atmosphere were 1.5 mmol/100 g PP and 1 kGy, respectively. DSC measurement and dynamic mechanical analysis showed that the thermal behavior of the high-melt-strength PP was different from that of the original PP. Crystallinity and crystallization temperature during cooling after heating were lower and higher in high melt strength PP than original PP, respectively. Elongational viscosity at 180°C of the high-melt-strength PP showed a remarkable increase at a certain elongational time with constant strain rate, demonstrating the typical property of high-melt-strength samples. This implies that a few higher molecular chains of PP, formed by intermolecular combination of its chain by HDDA in irradiation, give higher melt strength to induce entanglement of molecular chains. © 1996 John Wiley & Sons, Inc.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.