Transient analysis of an advanced static var compensator using quad-series voltage-source PAM inverters

This paper deals with an advanced static Var compensator (ASVC) using quad-series voltage-source PAM inverters. The ASVC consists of four three-phase voltage-source inverters with a common dc capacitor and four three-phase transformers, each primary winding of which is connected in series with each other. Each inverter outputs a square-wave voltage, while the synthesized output voltage of the ASVC has a 24-step wave shape. This results not only in a great reduction of harmonic currents and dc voltage ripples but also in fewer switching and snubbing losses. In this paper, transient analysis is performed with the focus on the response of reactive power and the resonance between the dc capacitor and ac reactors. Experimental results obtained from a small-rated laboratory model of 10 kVA are also shown to verify analytical results based on the p-q transformation. The analytical results help in the design of system parameters such as the capacity of the dc capacitor and feedback gains.     

Role of conserved Asn-Tyr-Asp-Tyr sequence in bacterial copper/2,4, 5-trihydroxyphenylalanyl quinone-containing histamine oxidase

Copper amine oxidase contains a covalently bound quinonoid cofactor, 2,4,5-trihydroxyphenylalanyl quinone (TPQ), which is synthesized by post-translational modification of a specific tyrosyl residue occurring in the highly conserved sequence, Asn-Tyr-(Asp/Glu)-Tyr. To elucidate the role(s) of the conserved sequence in the biogenesis of TPQ, each of the corresponding residues at positions 401-404 in the recombinant histamine oxidase from Arthrobacter globiformis has been replaced with other amino acids by site-directed mutagenesis. When Asn-401 was changed to Asp or Gln, the rate of TPQ formation by copper-dependent self-processing was 10(3)- to 10(4)-fold slower than in the wild-type enzyme. When Tyr-402 was replaced by Phe, TPQ was not formed at all, showing that Tyr-402 is essential as the precursor to TPQ. In contrast, Asp-403 could be replaced by Glu without changes in the rate of TPQ formation, whereas its replacement by Asn led to a marked decrease. Furthermore, when Tyr-404 was changed to Phe, TPQ was formed swiftly on incubation with copper ions, but the TPQ enzyme exhibited very low activity with altered substrate specificity. These results collectively indicate that a very rigorous structural motif is required for efficient formation of TPQ and for the catalytic activity in the active site of copper amine oxidases.     

Dyeing properties of oxygen low-temperature plasma-treated wool and nylon 6 fibres with acid and basic dyes

Wool and nylon 6 fibres treated with oxygen low-temperature plasma were dyed with acid and basic dyes. Despite the increase of electronegativity of the fibre surface caused by the plasma treatment, the rate of dyeing of wool was increased with both dyes, while that of nylon 6 was decreased with the acid dye and increased with the basic dye.     

Subarachnoid haemorrhage induced proliferation of leptomeningeal cells and deposition of extracellular matrices in the arachnoid granulations and subarachnoid space. Immunhistochemical study

Subarachnoid haemorrhage (SAH) often leads to subarachnoid fibrosis and resultant normal pressure hydrocephalus; however, how subarachnoid fibrosis occurs is unknown. We examined the changes within arachnoid granulations (AGs) and the subarachnoid space (SAS) chronologically at the parasagittal region obtained from patients with SAH at autopsy and made comparison with controls by immunostaining for cytokeratin, specific marker for leptomeningeal cells and by the elastica Masson-Goldner methods. Within a week some AGs were torn, and many inflammatory cells filled the AGs and SAS. Cytokeratin positive cells were scarce. During the next two weeks cytokeratin positive cells increased. After three weeks, AGs and SAS were filled by dense deposits of extracellular matrices surrounded by multiple layers of leptomeningeal cells.     

A 10-s doping technology for the application of low-temperaturepolysilicon TFTs to giant microelectronics

A bucket-type high-density (0.25-1.2-mA/cm²) low-energy (500-2000 V) ion source was utilized for high-speed phosphorus doping directly into a thin polysilicon layer without cap SiO₂. Doping gas with He dilution was selected to reduce etching of polysilicon film. Excimer laser (XeCl, 8 mm×8 mm) pulse annealing was introduced to activate effectively the doped impurity. The combination of these techniques provided a practically low sheet resistance for the TFT source, drain, and gate with a short time doping. The low-temperature polysilicon TFT fabricated with a doping time of 10 s had characteristics comparable to those of that fabricated by a longer time doping or conventional ion implantation, showing the practicality of this technology and its promise for giant microelectronics     

Environmental effect on room- temperature ductility of isothermally forged tial- base alloys

Isothermally forged TiAl-base alloys (Al-rich, Mn-containing, and Cr-containing TiAl) were heat-treated in various conditions, and equiaxed grain structures consisting of γ and α₂ or Β phases were obtained. The heat-treated alloys were tensile tested in vacuum and air at room temperature, and the environmental effect on tensile elongation was studied. The ductility of the alloys consisting of equiaxed γ grains and a large amount of α₂ grains was not largely affected by laboratory air, and a decrease in the amount of α₂ grains resulted in a large reduction of ductility in air. The Β phase in the Cr-containing alloy improved the ductility in vacuum, but it resulted in a large reduction of ductility in air. Formerly with Kougakuin University, Shinjyuku-ku, Tokyo, Formerly with National Research Institute for Metals, Meguro-ku, Tokyo,     

Model for the potential barrier depth along the grain boundaries of an ultrathin tin dioxide gas sensor

A potential barrier model along the grain boundaries in ultrathin tin dioxide (SnO₂) gas sensors is presented. It is assumed that the negatively charged oxygens are adsorbed only on the grain boundaries. The potential barrier depth is expressed as functions of grain size, donor concentration and surface coverage of adsorbed oxygen ions at the boundaries. A direct consequence is that the conduction electrons are effectively confined in a grain when the film thickness becomes smaller than a critical value. This indicates a drastic increase in resistivity with decreasing film thickness in air, and thus an occurrence of an extremely high gas sensitivity.     

Schottky barrier heights of contact metals to p-type ZnSe

Schottky barrier heights (SBHs) of a variety of metals (In, Cd, Nb, Ti, W, Cu, Ag, Au, Ni, Pt, and Se) contacting to p-ZnSe grown by a molecular beam epitaxy method were determined by analyzing capacitance-voltage (C-V) and/or current density-voltage (J-V) curves. The SBH values of the Au and Ni contacts were determined from intersections of straight lines of the C⁻²-V curves to be 1.23 and 1.13 eV, respectively. The J-V calculations provided a large SBH value of 1.2 ± 0.1 eV for a variety of metals, indicating that the Fermi-level could be pinned at the contact interface. Reduction of the SBH values to a level lower than 0.4 eV and/or increase of doping concentrations to a level higher than 10²⁰ cm⁻³ are essential to obtain an ohmic contact with contact resistivity of around 10⁻³ Ω·cm².     

Is it possible to differentiate between choledochal cyst and congenital biliary atresia (type I cyst) by antenatal ultrasonography?

Both choledochal cyst and congenital biliary atresia (type I cyst) may share the same ultrasonographic pattern. We report 2 cases which were shown to have cystic structures on the upper abdomen by antenatal ultrasonography. The size of the choledochal cyst found at 24 weeks' gestation increased steadily as gestational age advanced. But the size of the cyst in congenital biliary atresia found at 29 weeks' gestation remained unchanged throughout the remaining pregnancy. Cyst enlargement, therefore, may suggest the possibility of a choledochal cyst.     

Study of sexual function in male hemodialysis patients--a sexual function survey using a questionnaire

Sexual dysfunction is a well-documented complication among male hemodialysis patients. To evaluate it in detail, we conducted a sexual function survey using the Sapporo Medical University Sexual Function Questionnaire. Two hundred five male patients receiving outpatient hemodialysis were entered into this study. Patients with diabetes mellitus and severe anemia (Hb value < 8.0 g/dl) were excluded. The control group consisted of 3,462 healthy male subjects. Of male hemodialysis patients, 33.7% showed deterioration of libido, while 44.4% showed deterioration of potency, both of them decreased greatly with age. Ejaculatory ability correlated with potency. We compared the frequency of sexual intercourse in male hemodialysis patients with that in normal males. Twelve point nine percent of hemodialysis patients (HP) ranging from 30 to 39 in age versus 3.5% of age-matched normal males had no sexual intercourse and 22.4% of HPs from 40 to 49 versus 3.0% of age-matched normal males, 52.2% of HPs from 50 to 59 versus 7.5% of age-matched normal males, and 89.3% of HPs from 60 to 69 versus 18.0% of age-matched normal males had no sexual intercourse. These results revealed that the sexual frequency in hemodialysis patients decreased more than that in normal males in all age groups and with age.