A study on improving shielding performance of shielded cable

With the developments in power electronics equipment, the electromagnetic environment has become severe for electronic equipment. In the smart facility field, the stable operation of electronic devices is indispensable, and noise countermeasures must be improved. To suppress intrusive noise from cables, shielded cables are used in many cases. However, electromagnetic induction cannot be suppressed when the shield is grounded at one end, and when grounding both ends of the shield, current flows through the shield creating intrusive noise in the cable. That is, even if a shielded cable is used, a sufficient effect cannot be obtained. Therefore, as a countermeasure, this study prototypes and evaluates cables that combine double shielded cables with magnetic cores. Evaluations conducted using the copper pipe method, triaxial method, and impulse test confirm that the shielded performance improved by 10–30 dB compared with the conventional shielded cable.     

Parametric polynomial spectral factorization using the sum of roots and its application to a control design problem

This paper presents an algebraic approach to polynomial spectral factorization, an important mathematical tool in signal processing and control. The approach exploits an intriguing relationship between the theory of Gröbner bases and polynomial spectral factorization which can be observed through the sum of roots, and allows us to perform polynomial spectral factorization in the presence of real parameters. It is discussed that parametric polynomial spectral factorization enables us to express quantities such as the optimal cost in terms of parameters and the sum of roots. Furthermore an optimization method over parameters is suggested that makes use of the results from parametric polynomial spectral factorization and also employs two quantifier elimination techniques. This proposed approach is demonstrated in a numerical example of a particular control problem.     

Two-stage subspace identification for softsensor design and disturbance estimation

Softsensors or virtual sensors are key technologies in industry because important variables such as product quality are not always measured on-line. In the present work, two-stage subspace identification (SSID) is proposed to develop highly accurate softsensors that can take into account the influence of unmeasured disturbances on estimated key variables explicitly. The proposed two-stage SSID method can estimate unmeasured disturbances without the assumptions that the conventional Kalman filtering technique must make. Therefore, it can outperform the Kalman filtering technique when innovations are not Gaussian white noises or the characteristics of disturbances do not stay constant with time. The superiority of the proposed method over the conventional methods is demonstrated through numerical examples and application to an industrial ethylene fractionator.     

Solving the irregular strip packing problem via guided local search for overlap minimization

The irregular strip-packing problem (ISP) requires a given set of non-convex polygons to be placed without overlap within a rectangular container having a fixed width and a variable length, which is to be minimized. As a core sub-problem to solve ISP, we consider an overlap minimization problem (OMP) whose objective is to place all polygons into a container with given width and length so that the total amount of overlap between polygons is made as small as possible. We propose to use directional penetration depths to measure the amount of overlap between a pair of polygons, and present an efficient algorithm to find a position with the minimum overlap for each polygon when it is translated in a specified direction. Based on this, we develop a local search algorithm for OMP that translates a polygon in horizontal and vertical directions alternately. Then we incorporate it in our algorithm for OMP, which is a variant of the guided local search algorithm. Computational results show that our algorithm improves the best-known values of some well-known benchmark instances.     

Direct Ray Tracing of Phong Tessellation

There are two major ways of calculating ray and parametric surface intersections in rendering. The first is through the use of tessellated triangles, and the second is to use parametric surfaces together with numerical methods such as Newton's method. Both methods are computationally expensive and complicated to implement. In this paper, we focus on Phong Tessellation and introduce a simple direct ray tracing method for Phong Tessellation. Our method enables rendering smooth surfaces in a computationally inexpensive yet robust way.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

New oxide phosphors for FEDs: Ruddlesden—Popper phases synthesized with IIIB‐group elements

Abstract— A red‐emitting phosphor, SrTiO³:Pr³⁺, for low‐voltage‐type FEDs and VFDs was developed by Futaba Corporation in 1996. The addition of Al or Ga is essential in the preparation of this phosphor because it improves the luminescence efficiency dramatically. For this impurity effect, Futaba Corporation proposed a charge‐compensation mechanism, which was supported by a recent observation of emission lines due to Al³⁺‐Pr³⁺ pairs. In addition, it was found that Al also works as a scavenger of planar defects, presumably SrO thin layers interleaved in the SrTiO³ lattice, by forming strontium aluminates. The latter mechanism suggests the possibility that a similar impurity effect can be found in materials with crystal structures, including alkaline‐earth oxide layers (Ruddlesden‐Popper phases).     

Logichart — Intelligible Program Diagram for Prolog and its Processing System

An intelligible program diagram called Logichart has been developed for Prolog visualization. Its syntax rules and layout rules are formalized in terms of an attribute graph grammar. This grammar is underlain by a context–free graph grammar whose productions are defined to formalize the graph–syntax rules of Logichart diagrams. Semantic rules attached to the productions are defined in such a way that they can extract the layout information needed to display a Logichart diagram as attributes. Our Prolog visualization system, which has been implemented based on the attribute graph grammar, can draw a Logichart diagram for any correct Prolog program (completeness), and any Logichart diagram displayed by the system is always valid for the grammar (soundness). The system can also display the execution of a Prolog program in real time; that is, the Logichart diagram is dynamically updated as the program runs.     

Dielectric Dispersion of Polycrystalline Aluminum Nitride at Microwave Frequencies

Complex permittivity of polycrystalline AlN was measured over the frequency range 100 MHz to 13 GHz using reflection coefficient and cavity resonator methods. Dielectric relaxation peaks of loss tangent were observed in the frequency range 200 MHz to 3 GHz. The maximum value of loss tangent was ∼200 × 10⁻⁴. Relative permittivities decreased by ∼4% with increased frequency at the region of relaxation peaks. It was shown that these dispersion frequencies were inversely proportional to the grain sizes of AlN and independent of purities and processes. Model calculations for elastic vibration of a single-crystal grain of AlN were performed to investigate the origin of the dielectric dispersion due to piezoelectric effect. The calculated results of elastic sphere and 14-faced-polyhedron models showed a good quantitative agreement with the observed dispersion frequencies, which suggested that the dispersion was due to a piezoelectric vibration of a single grain of AlN ceramics at microwave frequencies.     

Discrete choice in commuter space: Small area analysis of diurnal population change in the Tokyo Metropolitan Region

Considerations of metropolitan commuting have often related to urban space as a continuum, and to commuting itself as a process. This approach has led to escalating complexity in the measurement, modeling and analysis of commuting, often with no commensurate results. The present study extends an alternative approach that considers commuter space of a metropolis as a discrete set of small areas. Each small area throughout the metropolis is a nighttime location of some households and, as a possible discrete destination choice of individuals within households, each subarea is also a daytime location of some persons. Each subarea, therefore, may be thought of as attaining two values, corresponding to its daytime (e.g., noontime) and nighttime (e.g., midnight) populations. The diurnal demographic shift of subareas, as a set of binary events, or toggles, between daytime and nighttime populations, is associated with commuter access throughout the metropolis. Diurnal shift offers structural simplicity aimed at estimating small-area daytime populations across a metropolitan region that might suitably precede and complement conventional continuum considerations of commuting. Using data for the Tokyo Metropolitan Region, we identify average household size as the nighttime indicator of small-areas, and daytime population density as their daytime indicator. The potential for the estimation of daytime populations across metropolitan regions where daytime population data are unavailable, is underscored by the clear tendency towards inverse relation of these two indicators of diurnal shift.