Guinea pig bone marrow cells treated with platelet-activating factor generate factor(s) which affects their DNA synthesis and microbicidal activity

We have previously reported that platelet-activating factor (PAF) induces proliferation and microbicidal activity of guinea pig bone marrow cells. In the present study, we have found that the conditioned medium of PAF- or nonmetabolizable PAF agonist-treated guinea pig bone marrow cells augmented DNA synthesis and induced microbicial activity of bone marrow cells. A PAF specific antagonist, CV-6209, inhibited generation of the active conditioned medium by PAF. Addition of the PAF antagonist only partially suppressed the augmentative effect of the active conditioned medium on DNA synthesis; this is consistent with the fact that, because of the rapid breakdown, no appreciable amount of PAF remained in the conditioned medium of PAF-treated cells. Although mouse bone marrow cells did not respond to PAF unlike guinea pig cells, their DNA synthesis was significantly enhanced by the conditioned medium of PAF-treated guinea pig bone marrow cells. Thus, some newly generated factor(s) distinct from the originally inoculated PAF seemed to modulate the bioactions of PAF on bone marrow cells. An appreciable amount of PAF was produced by calcium ionophore-treated guinea pig bone marrow cells. These findings indicate that PAF synthesized in guinea pig bone marrow cells induces generation in the cells of some factor(s) which affects proliferation or microbicidal activity. Presented at The Third International Conference on Platelet-Activating Factor and Structurally Related Ether Lipids, Tokyo, Japan, May 1989.     

Evaluation of the agronomic effectiveness of natural and partially acidulated phosphate rocks in several soils using32P isotopic dilution techniques

The agronomic effectiveness of two natural phosphate rocks (PRs) from North Carolina (USA) and Togo and their 50% partially acidulated products (PAPRs) was evaluated in two greenhouse experiments using³²P isotopic dilution techniques, namely L and A_L values.In the first experiment rye grass was grown in a soil from Ghana. While the proportion of P in the plant derived from the P fertilizer (Pdff) ranged on. the average from about 10% for the PRs up to 80% for the PAPRs, the P fertilizer recovery was less than 1% for a 60-day growth period. In the second experiment, average values of P in the maize plants derived from the PAPRs ranged from 35% to 75% in 3 different soils. Both PRs were ineffective with the exception of North Carolina PR in the Seibersdorf soil. The P fertilizer recovery was 0.25% for the North Carolina PR in this soil whereas the recovery values ranged from 1.2% to 1.6% for the PAPRs.Mean values of the relative fertilizer efficiency estimated from the L values of each soil were less than 1% for the PRs whereas the values for the PAPRs which were dependent on soil type ranged from 20% up to 45%. The coefficient of relative effect of partial acidulation, that was calculated from the ratio of A_L values for PR and PAPR in each soil indicated that partial acidulation increased the effectiveness of the natural PRs in all soils under study.This study showed that the use of³²P isotope dilution techniques allows an accurate measurement of the P availability from natural and modified PR products to crops. Another advantage is that quantitative comparison of the P sources under study, PRs and PAPRs in this case, can be made even in soils where there is no response to the applied P sources.     

Reaction products of α-tocopherol with methyl linoleate-peroxyl radicals

α-Tocopherol was reacted with methyl linoleateperoxyl radicals at 37°C. The peroxyl radicals were generated by the reaction of methyl linoleate with a free radical initiator, 2,2′-azobis(2,4-dimethylvaleronitrile). The primary products of α-tocopherol with methyl linoleate-peroxyl radicals were isolated by reversephase and normal-phase high performance liquid chromatography (HPLC), and their structures were characterized by ultraviolet (UV), infrared (IR),¹H and¹³C nuclear magnetic resonance (NMR) and mass spectrometry (MS). There were four stereoisomers of methyl 13-(8a-peroxy-α-tocopherone)-9(Z),11(E)-octadecadienoate and four stereoisomers of methyl9-(8a-peroxy-α-tocopherone)-10(E),12(Z)-octadecadienoate.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Properties of conductive films made from fine spherical silver-palladium alloy particles

Silver-palladium alloy films were made by a thick-film technique using several metal powders prepared by the spray-pyrolysis method. Two types of powders were used: silver-palladium alloy powders (15 mol % Pd and 30 mol % Pd) and mixtures of silver and palladium powders. The fired films were about 2–3 m in thickness. The alloy particles sintered uniformly in firing, whereas, in the case of the powder mixtures, the alloying of silver and palladium particles caused uneven particle growth and large voids were formed in the fired films. For this reason the films made from the alloy powders had better conductive properties than those made from the powder mixtures. The resistivities of the films made from the alloy powders were close to the intrinsic value for silver-palladium alloys. Further, the oxidation of palladium during heating in air was significantly suppressed in the alloy powders when the palladium content was lower than 30 mol % in accordance with thermodynamic considerations.     

Increasing Efficiency of Force-Controlled Robotic Assembly: -Design of Damping Control Parameters Considering Cycle Time-

Parameter tuning of force control to achieve operations efficiently in robotic assembly is essential but time-consuming. In this paper, an optimal set of parameters for damping control is computed, which can reduce the cycle time of an assembly operation. The proposed method is formulated as a nonlinear optimization using a dynamic simulator based on 3D geometric model of assembled parts. The method is applied to clutch assembly for practical use. The results verify how the operations can be sped up using the obtained parameters. The proposed method enables users to introduce force control agilely.     

Determination of waviness decrease rate by measuring the frequency characteristics of the grinding force in centerless grinding

In centerless grinding, it is difficult to optimize the grinding conditions for minimizing the workpiece roundness error because of the high number of process parameters such as center height angle, blade angle, and stock removal rate. We had previously proposed a function for evaluating grinding conditions, i.e., the waviness decrease rate, in order to automatically select the optimum process parameters. In order to build a closed-loop control system for the process parameters, however, it is necessary to find a practical way to determine the waviness decrease rate. In this paper, the relationship between the waviness decrease rate and the dynamic components of the grinding force was investigated analytically. It was found that the frequency characteristics of the waviness decrease rate show a similar tendency to those of the grinding force. A grinding force measurement system was built and experiments for measuring the frequency characteristics of the grinding force were carried out. As a result, it was confirmed that the waviness decrease rate can be determined by measuring the frequency characteristics of the grinding force.     

Infiltrating the zebrafish swarm: design,implementation and experimental tests of a miniature robotic fish lure for fish–robot interaction studies

Robotic fish are nowadays developed for various types of research, such as bio-inspiredrobotics, biomimetics and animal behavior studies. In the context of our research on the social interactions of the zebrafish Danio Rerio, we developed a miniature robotic fish lure for direct underwater interaction with the living fish. This remotely controlled and waterproof device has a total length of 7.5 cm with the same size ratio as zebrafish and is able to beat its tail with different frequencies and amplitudes, while following the group of living animals using a mobile robot moving outside water that is coupled with the robotic lure using magnets. The robotic lure is also equipped with a rechargeable battery and can be used autonomously underwater for experiments of up to 1 h. We performed experiments with the robot moving inside an aquarium with living fish to analyze its impact on the zebrafish behavior. We found that the beating rate of the tail increased the attractiveness of the lure among the zebrafish shoal. We also demonstrated that the lure could influence a collective decision of the zebrafish shoal, the swimming direction, when moving with a constant linear speed inside a circular corridor. This new robotic fish design and the experimental results are promising for the field of fish–robot interaction.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO₄₊ , in which the phase separation observed in La₂CuO₄₊ is suppressed. A phase diagram in theT– plane is given for La_1.9Bi_0.1CuO₄₊ with excess oxygen. For very small values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly at 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Methanation of CO2 with the oxygen-deficient Ni(II)-ferrite under dynamic conditions

The continuous methanation of CO₂ has been accomplished over hydrogen-reduced Ni(II)-bearing ferrite (Ni_xFe_3–xO_4–; x=0.39, > 0) in a mixed gas flow of CO₂ and H₂ at 250–375 °C. The yield and the selectivity for the methanation were larger than 50% and 95%, respectively, at the initial stage of the process. They decreased to 31% and 89%, respectively, after 6 h methanation. The innovative results can be ascribed to the use of the new material; hydrogen-reduced Ni(II)-bearing ferrite. Its formation was evinced by chemical analyses and the increase in the lattice constant; the lattice constant of the Ni(II)-bearing ferrite (a₀ 0.8375 nm) was enlarged to 0.8379 nm by hydrogen reduction. The enlarged lattice constant was not changed during the methanation. These findings suggest that the methanation occurs at the oxygen-deficient site of the hydrogen-reduced Ni(II)-bearing ferrite, as well as the formation of water by combination of the incorporated oxygens with hydrogen. The methanation consists of three steps of the elementary reaction. First, the oxygen-deficient sites are formed by hydrogen reduction; second, CO₂ is reduced to elementary carbon and two oxygen ions which are incorporated into the oxygen-deficient sites; and third, the carbon deposited on the surface of the reduced ferrite is selectively hydrogenated to CH₄.