Flow of water through highly swollen membranes

The difference between the hydraulic permeability K under a pressure gradient and the diffusive permeability P under a concentration gradient can be explained by the incipient viscous flow at high degree of swelling. This flow is opposed by the friction resistance of the macromolecules of the highly swollen membrane. It comes to an end at a critical swelling H_c when the number of permeant molecules is not more sufficient for a complete solvation of the macromolecules of the membrane. Below this swelling, K equals PV₁/RT, where V₁ is the molar volume of the permeant, and above it the difference K ? PV₁/RT is proportional to H/(1 ? H) ? H_c/(1 ? H_c). The proportionality factor depends on the friction coefficient of the macromolecular segments and on the average lateral chain clustering. The data on poly(glycerol methacrylate) suggest that on the average the aggregates contain two chains.     

Role of protein kinase Cbeta in rhythmic contractions of human pregnant myometrium

To assess the role of protein kinase Cbeta (PKCbeta) in human myometrial contractions during pregnancy, we evaluated the effect of a PKCbeta inhibitor (LY333531) on the pregnant and nonpregnant myometrial contractions and compared the level of PKCbeta in the pregnant myometrium with that in the nonpregnant myometrium. The effects of LY333531 on the myometrial contractions were examined by measuring contractile activity (frequency and amplitude). PKCbeta in human myometrium was assessed at mRNA level using real-time PCR method. The characteristics of contractile activity were different between the pregnant and the nonpregnant myometrium. The amplitude of rhythmic contractions in the preterm and term myometrium was increased 2- to 2.5-fold when compared with that in the nonpregnant myometrium, but the frequency of rhythmic contractions was decreased by about half. LY333531 (10(-6) M) reduced the increased amplitude in the preterm and term myometrium by about 50%, and the inhibitory effects of LY333531 in the pregnant myometrium were significantly greater than that in the nonpregnant myometrium (about 50 vs 25%). However, the frequency in the pregnant and nonpregnant myometrium was not influenced by LY333531. Real-time PCR revealed a significant, five- to sevenfold increase in the expression of PKCbeta mRNA in the preterm and term myometrium when compared with the nonpregnant myometrium. These findings suggest that the increased amplitude of human myometrial contractions during pregnancy is related to the increased level of PKCbeta. A PKCbeta inhibitor may reduce preterm uterine contractions and prevent preterm delivery.     

Bioaccumulation, temporal trend, and geographical distribution of synthetic musks in the marine environment

Bioaccumulation of synthetic musks in a marine food chain was investigated by analyzing marine organisms at various trophic levels, including lugworm, clam, crustacean, fish, marine mammal, and bird samples collected from tidal flat and shallow water areas of the Ariake Sea, Japan. Two of the polycyclic musks, HHCB and AHTN, were the dominant compounds found in most of the samples analyzed, whereas nitro musks were not detected in any of the organisms, suggesting greater usage of polycyclic musks relative to the nitro musks in Japan. The highest concentrations of HHCB were detected in clams (258-2730 ng/g lipid wt.), whereas HHCB concentrations in mallard and black-headed gull were low, and comparable with concentrations in fish and crab. These results are in contrast to the bioaccumulation pattern of polychlorinated biphenyls; for which a positive correlation between the concentration and the trophic status of organisms was found. Such a difference in the bioaccumulation is probably due to the metabolism and elimination of HHCB in higher trophic organisms. Temporal trends in concentrations of synthetic musks were examined by analyzing tissues of marine mammals from Japanese coastal waters collected during 1977-2005. HHCB concentrations in marine mammals have shown significant increase since the early 1990s, suggesting a continuous input of this compound into the marine environment. Comparison of the time trend for HHCB with those for PCBs and PBDEs suggested that the rates of increase in HHCB concentrations were higher than the other classes of pollutants. To examine the geographical distribution of HHCB, we have analyzed tissues of fish, marine mammals, and birds collected from several locations. Synthetic musks were not detected in a sperm whale (pelagic species) from Japanese coastal water and in eggs of south polar skua from Antarctica. While the number of samples analyzed is limited, these results imply a lack of long-range transportation potential of synthetic musks in the environment.     

Preparation of a Gas Diffusion Electrode by Ozone Gas Pretreatment and an Ion-exchange Method

Surface oxidation using ozone gas, produced by an electrolytic ozone generator, was applied for preparation of a gas-diffusion electrode (GDE) for an electrochemical energy conversion system. An uncatalyzed carbon sheet containing poly(tetrafluoroethylene) binder was first placed into contact with ozone gas to form active functional groups on the surface of the carbon; then ion-exchange between a weakly bound hydrogen of the functional groups and a platinum cation complex was performed. A GDE having highly dispersed particles of a platinum metal deposited on a porous carbon sheet ws developed by this method. The fuel cell using this GDE showed high performance.     

Dependence of Lanthanide-Ion Binding Performance on HDEHP Concentration in HDEHP Impregnation to Porous Sheet

An octadecylamino-group-introduced polymer chain grafted onto a porous sheet was impregnated with bis(2-ethylhexyl)hydrogen phosphate (HDEHP). A mixture of HDEHP and ethanol of various HDEHP concentrations was used for the impregnation. The porous sheet into which a C₁₈H₃₇NH group was introduced was immersed in HDEHP/ethanol solution before ethanol evaporation. The liquid permeability of a cartridge charged with the HDEHP-impregnated porous sheet in disk form prepared in 50 (v/v)% HDEHP/ethanol solution was 96% that of the starting-porous-disk-packed cartridge. The equilibrium binding capacity of the HDEHP-impregnated porous disk for yttrium ions was 0.32 mol per kg of the disk. In addition, the HDEHP-impregnated-porous-disc-packed cartridge was found to be applicable to the preconcentration of trace amounts of lanthanides in a multielement solution prior to their measurement by inductively coupled plasma mass spectrometry.     

Influence of water content in sub-flooring materials using adhesive on chemical compounds emission

Indoor air pollution is caused predominantly by emission of primary pollutants from building materials or finishing materials. Recently, there has been increasing interest in the new secondary pollutants caused by chemical reaction of the primary pollutants. In this study, the pollutants emitted from poly(vinyl chloride) (PVC) flooring material were measured, and 2-ethyl-1-hexanol (2E1H) and volatile organic compounds (VOCs) emitted from composite building materials made of PVC flooring material used as a self-leveling flooring were measured to identify the mechanism of emission of 2E1H. The moisture sorption isotherm was measured with a Magnetic Suspension Balance to examine the moisture content of the self-leveling flooring material and its effect on emission of 2E1H. 2E1H was emitted from the PVC flooring material through hydrolysis or oxidation of di-2-ethylhexyl phthalate (DEHP). The composite building material including the self-leveling flooring material emitted more 2E1H through hydrolysis over time. It was determined that liquid prevails in the self-leveling flooring material when the water content is higher than 4% and vapor prevails when the water content is lower than 4%. The prevailing liquid in the flooring material contributes to the increased emission of 2E1H and the prevailing vapor in the material did not cause increase in emission of 2E1H. It is considered that control of water in the self-leveling flooring material or concrete slab is very important in order to inhibit emission of 2E1H through hydrolysis of DEHP on the floor.     

Photocatalytic effects of plasma-heated TiO2−x particles under visible light irradiation

The photocatalytic characteristics of partially reduced TiO₂ (TiO_2?x ) by plasma treatment and plasma-heated treatment were investigated in the visible-light region. For the visible-light photocatalytic activity of TiO_2?x , plasmaheated treatment shows stronger than plasma treatment significantly. The TiO_2?x by plasma-heated treatment shows broader red-shifted absorption bands than one by plasma treatment in the visible-light region. The surface color of TiO_2?x by plasma treatment and plasma-heated treatment changed from white to sky blue, and to navy, respectively. After exposure to air, the surface color of TiO_2?x changed from sky blue to white for plasma treatment and from navy to beige for plasma-heated treatment.     

Improvement of carrier diffusion length in silicon nanowire arrays using atomic layer deposition

To achieve a high-efficiency silicon nanowire (SiNW) solar cell, surface passivation technique is very important because a SiNW array has a large surface area. We successfully prepared by atomic layer deposition (ALD) high-quality aluminum oxide (Al₂O₃) film for passivation on the whole surface of the SiNW arrays. The minority carrier lifetime of the Al₂O₃-depositedSiNW arrays with bulk silicon substrate was improved to 27 μs at the optimum annealing condition. To remove the effect of bulk silicon, the effective diffusion length of minority carriers in the SiNW array was estimated by simple equations and a device simulator. As a result, it was revealed that the effective diffusion length in the SiNW arrays increased from 3.25 to 13.5 μm by depositing Al₂O₃ and post-annealing at 400°C. This improvement of the diffusion length is very important for application to solar cells, and Al₂O₃ deposited by ALD is a promising passivation material for a structure with high aspect ratio such as SiNW arrays.     

Round robin on indentation fracture resistance of silicon carbide ceramics by using a powerful optical microscope

Reproducibility of indentation fracture resistance, K_IFR of silicon carbides sintered with B and C was evaluated by a round robin with ten laboratories. When the crack length was measured with an optical microscope at a low magnification of ～100×, K_IFR varied widely from 3.43 to 4.20 MPa m^1/2, whereas those obtained by a powerful microscopy with both an objective lens of 40× and a traveling stage exhibited a consistent value of 3.20±0.12 MPa m^1/2. The wide scatter of K_IFR for the former measurements was attributed mainly to the variation in misreading of the crack length. It was revealed that the high resolving power of the objective lens of 40× enabled to find exact crack tips easily, which resulted in the good matching of K_IFR between laboratories for the latter case. It was suggested that the observation of indentations with powerful optics was effective for improving the reproducibility of the IF method.     

X-ray studies of multiple melting behavior of poly(butylene-2,6-naphthalate)

Multiple melting behavior of poly(butylene-2,6-naphthalate) (PBN) was studied with X-ray analysis and differential scanning calorimetry (DSC). Double endothermic peaks L and H attributed to the α-form crystal modification, a small peak attributed to the β-form crystal modification, and a new shoulder peak S at a lower temperature of peak H appeared in the DSC melting curves. Wide-angle X-ray diffraction patterns of the samples isothermally crystallized at 200 and 220 °C were obtained at a heating rate of 1 K min⁻¹, successively. In this heating process, change of crystal structure and increase of quantity of the β-form crystallites could not be observed up to the final melting. With increasing temperature, the diffraction intensity decreased gradually and then increased distinctly before a steep decrease due to the final melting. The X-ray analysis clearly proved the melt-recrystallization during heating. The β-form crystal modification was formed during slow heating process in the high temperature region.