Interface Management within Construction: In Particular, Building Facade

This paper discusses the need for interface management within construction, with particular reference to building facade interfaces. It categorizes the three different types of interface management—physical, contractual, and organizational. The implication of interface management in construction contracting is discussed; it is explained how the U.K. procurement trends have changed, affecting the interface management within projects. U.K. cladding procurement is very fragmented, and the paper maps the development of a typical cladding system showing the complexities of interface management. Finally, the paper discusses CladdISS, a U.K. government funded research project to develop a standardized strategy for the design and management of window and cladding interfaces. It explains the principles of CladdISS with reference to process maps, action plans, management strategy, bibliography, advice on standards, materials, maintenance, joints, movement, and tolerances. This will enable strategies to be developed to avoid the endemic interface problems occurring on-site. It will also guide the management of the interfaces throughout the project.     

Shape memory properties of Ni-Ti based melt-spun ribbons

Shape-memory properties of equiatomic NiTi, Ni₄₅Ti₅₀Cu₅, and Ni₂₅Ti₅₀Cu₂₅ ribbons made by melt spinning have been studied by temperature inducing the martensitic transformation under constant tensile loads. Recoverable strains above 4 pct can be obtained under ∼100 MPa loads for the NiTi and Ni₄₅Ti₅₀Cu₅ ribbons, transforming to B19’ martensite. The B19 martensite is formed in the Ni₂₅Ti₅₀Cu₂₅ ribbon after crystallization, and according to the lowering in transformation strain as Cu content increases, the recoverable strain is close to 2.5 pct for ∼150 MPa load. The transformation temperatures exhibit a linear dependence on the applied stress, which can be quantitatively described by means of a Clausius-Clapeyron type equation. The NiTi and Ni₄₅Ti₅₀Cu₅ ribbons exhibited some degree of two-way shape-memory effect (TWSME) after thermomechanical cycling. Texture analyses performed on the different ribbons allow us to better understand the transformation strains obtained in each ribbon. The amounts of shape-memory effect (SME) and nonrecoverable strain shown by the studied ribbons are of the same order as those already observed in bulk materials, which makes melt spinning an ideal substitute to complicated manufacturing processes if really thin samples are needed. However, applicable stresses in melt-spun ribbons are limited by a relatively “premature” brittle fracture caused by irregularities in ribbon thickness.     

Hydrogen absorption by Pd-coated ZrNi prepared by using Barrel-Sputtering System

To improve the durability of hydrogen storage materials against surface poisoning by impurity gases, effectiveness of Pd-coating layer prepared by using a Barrel-Sputtering System was examined for ZrNi powder. The effectiveness of Pd-coating was evaluated by activation temperature, at which Pd/ZrNi poisoned by air could be activated to absorb hydrogen. Characterization of Pd-coated ZrNi (denoted as Pd/ZrNi) by scanning electron microscopy, electron probe microanalysis and X-ray diffraction showed that a uniform Pd-coating layer was formed with the barrel-sputtering system. It was found that the poisoned Pd/ZrNi sample could be activated even at 423 K to absorb hydrogen at room temperature. This exhibits remarkable contrast to bare ZrNi, which could be only activated appreciably above 1073 K. It is concluded that the Pd-coating by barrel sputtering is quite effective to avoid the effect of surface poisoning of powdery hydrogen storage materials. However, the activation at excessively high temperature resulted in the loss of high activity to absorb hydrogen. It was concluded that this phenomenon was associated with reactions between Pd and ZrNi to form PdZr and other byproducts.     

Fibrous carbon materials having a protective oxidation resistant coating

Conclusions -- A gas-phase method of depositing one- or multiple-component carbide coatings on CFM of various textile structures has been developed. With preservation of the strength and elastic characteristics of the CFM, the thermo-oxidative resistance of the material is increased, plus the temperature range for the decomposition is shifted into the higher temperature region — by 150–250°C as compared with the starting material.-- CFM with protective coatings are finding ever greater use in making filters for cleaning up high-temperature gas-air mixtures.VNIIPV. Translated from Khimicheskie Volokna, No. 3, pp. 47–48, May–June, 1991.     

Properties of thin TiN films deposited onto stainless steel by an in-line dry coating process

A new coil-coating pilot plant, capable of utilizing ion plating, sputtering and plasma-assisted chemical vapor deposition (PACVD) processes, independently or in series, was developed and optimum conditions for TiN, TiC, Al_xO_y, SiO_x and Cr coating were established. This paper is mostly concerned with the results of characterization (conducted in parallel by the authors′ two institutions) of TiN films deposited by ion plating or sputtering onto type-304 stainless steel strips. In particular, the dependence of the basic properties such as chemical composition, structure, adhesion, and color on the coating process are discussed with respect to anti-corrosion, anti-wear, and decorative applications. TiN coatings with a very attractive gold coloration were obtained; they performed well in wear testing, but did not show satisfactory corrosion resistance. However, it was found that the latter can be improved significantly by depositing a SiO_x, top layer by PACVD above the TiN coating. Thus the in-line dry coating processes are capable of producing highly functional steel surfaces with decorative color and high corrosion resistance.     

Formula creatinine clearance as a substitute for 24-hour creatine clearance in children with kidney transplantation

A 10-year-old German shepherd dog presented with a periodontal 10 mm interproximal defect between the left mandibular fourth premolar and first molar teeth. Bone graft removed from the caudoventral portion of the ipsilateral hemimandible was placed in the defect as a component of the periodontal treatment plan. The use of bone graft likely contributed to periodontal pocket reduction.     

Ischemic preconditioning prior to myocardial protection with cold blood cardioplegia in coronary surgery

OBJECTIVE: Encouraging results on myocardial preconditioning in experimental models of infarction, stunning or prolonged ischemia raise the question whether preconditioning techniques may enhance conventional cardioplegic protection used for routine coronary surgery. METHODS: A prospective clinical trial was conducted to investigate the effect of additional ischemic normothermic preconditioning prior to cardioplegic arrest applying cold blood cardioplegia in patients scheduled for routine coronary surgery (3 vessel disease, left ventricular ejection fraction > 50%). Two cross clamp periods of 5 min with the hearts beating in sinus rhythm were applied followed by 10 min of reperfusion, each (n = 7, group I). Inducing moderate hypothermia cold blood cardioplegia was delivered antegradely. In control groups, cold intermittent blood cardioplegia (n = 7, group II) was used alone. Coronary sinus effluents were analyzed for release of creatine kinase (CK), CK-MB, lactate, and troponin T at 1, 3, 6, 9, and 12 h. In addition, postoperative catecholamine requirements were monitored. RESULTS: The procedure was tolerated well, and no perioperative myocardial infarction in any of the groups studied occurred. Concentrations of lactate tended to be higher in group I, but this difference was not significant. In addition, no significant differences for concentrations of CK, CK-MB, and troponin T were found. Following ischemic preconditioning an increased dosage of dopamine was required within the first 12 h postoperatively (group I: 2.63 +/- 1.44 microg/kg/min, group II: 0.89 +/- 1.06 microg/kg/min). CONCLUSIONS: Combining ischemic preconditioning and cardioplegic protection with cold blood cardioplegia does not appear to ameliorate myocardial protection when compared to cardioplegic protection applying cold blood cardioplegia alone. Inversely, contractile function seemed to be impaired when applying this protocol of ischemic preconditioning.     

The influence of psychosocial factors on heart transplantation decisions and outcomes

In January 1990, a well-established heart transplant program added a psychosocial evaluation procedure to its medical evaluation of potential transplant recipients. To determine the predictive value of psychosocial evaluation for decisions to list patients for a transplant and for ultimate clinical outcomes, we reviewed records of 191 patients who underwent psychosocial evaluation in the subsequent 3 years. Informal prescreening for obvious psychopathology and other disqualifiers almost certainly restricted the ranges of psychosocial factors observed in the sample. Of 120 patients listed, 61 actually received transplants. Psychosocial factors were little used in deciding whether to list the patients and were not predictive of recipients' medical outcome or compliance, but were moderately predictive of complication rates and difficulty of managing patients after transplantation. Although psychosocial evaluation of prescreened potential transplant recipients has little value in predicting medical outcome, it may be useful for planning and scheduling care after transplantation.