Adhesion improvement of HIVIPP C targets on Au backings

Accurate measurement of the cross-section of the ¹²C(α, γ)¹⁶O reaction is very important in nuclear astrophysics. Enriched ¹²C targets prepared with the high energy vibrationl powder plating [HIVIPP] method for this purpose have been used successfully. Initially, however, the ¹²C deposits for studying this small cross-section partially peeled from their Au backings when irradiated with beam currents≥2 times the 7 μA pulsed α-beam used previously. This problem was solved when the amorphous ¹²C powders were converted to graphite by heat-treatment in a high-temperature furnace. We investigated powder heat treatments at temperatures of 2600-3500 °C to reveal, which conditions resulted in uniform and highly adhesive depositions on Au backings.     

Fabrication and piezoelectric properties of BaTiO3/BaTiO3-Bi(Mg1/2Ti1/2)O3-BiFeO3 composites

We fabricated xBaTiO₃ (BT)/(1-x)[BaTiO₃-Bi(Mg_1/2Ti_1/2)O₃-BiFeO₃] (BT-BMT-BF)?+?0.1?wt%MnCO₃ composites by spark plasma sintering and investigated the effect of BT content x, BT powder size, and BT-BMT-BF composition on piezoelectric properties. For xBT/(1-x)(0.3BT-0.1BMT-0.6BF) +?0.1?wt%MnCO₃ (x?=?0–0.75) composites with a 0.5-µm BT powder, the dielectric constant was increased with x, and the relative density was decreased at x?=?0.67 and 0.75, creating optimum BT content of x?=?0.50 with a piezoelectric constant d₃₃ of 107?pC/N. When a larger 1.5-µm BT powder was utilized for the composite with x?=?0.50, the d₃₃ value increased to 150?pC/N due to the grain size effect of the BT grains. To compensate for a compositional change from the optimum 0.3BT-0.1BMT-0.6BF due to partial diffusion between the BT and 0.3BT-0.1BMT-0.6BF grains, a 0.5BT/0.5(0.275BT-0.1BMT-0.625BF)?+?0.1?wt%MnCO₃ composite with the 1.5-µm BT powder was fabricated. We obtained an increased d₃₃ value of 166?pC/N. These results provided a useful composite design to enhance the piezoelectric properties.     

The study of activity median aerodynamic diameter using imaging plate technique for assessment of effective dose from radon and its decay products

The indoor workplace environment was evaluated for exposure to radon and its decay products at two Universities in two metropolises of Japan. The mean radon concentrations in Nagoya University (NU) and Hokkaido University (HU) were 16.7 Bq m(-3) and 18.0 Bq m(-3), respectively. Activity median aerodynamic diameter (AMAD) of particles at NU ranged from 172 nm approximately 205 nm and at HU from 186 nm approximately 300 nm. Estimated effective doses for five usual sites of NU by ICRP approach was 0.15 mSvy(-1) approximately 0.76 mSvy(-1) and by UNSCEAR approach was 0.05 mSvy(-1) approximately 0.24 mSvy(-1). The effective dose for the same of HU by ICRP 66 approach was 0.16 mSvy(-1) approximately 0.79 mSvy(-1) and by UNSCEAR 2000 approach was 0.05 mSv y(-1) to 0.26 mSv y(-1). The two approaches differs on an average by a factor 2.3- approximately 4.7. The AMAD of obtained particle size distribution at NU has an average total deposition of 23% in human respiratory tract and 20% at HU.     

Oral Squamous Cell Carcinoma Contributes to Differentiation of Monocyte-Derived Tumor-Associated Macrophages via PAI-1 and IL-8 Production

Tumor-associated macrophages (TAMs) promote cancer cell proliferation and metastasis, as well as anti-tumor immune suppression. Recent studies have shown that tumors enhance the recruitment and differentiation of TAMs, but the detailed mechanisms have not been clarified. We thus examined the influence of cancer cells on the differentiation of monocytes to TAM subsets, including CD163⁺, CD204⁺, and CD206⁺ cells, in oral squamous cell carcinoma (OSCC) using immunohistochemistry, flow cytometry, and a cytokine array. Furthermore, we investigated the effect of OSCC cells (HSC-2, SQUU-A, and SQUU-B cells) on the differentiation of purified CD14⁺ cells to TAM subsets. The localization patterns of CD163⁺, CD204⁺, and CD206⁺ in OSCC sections were quite different. The expression of CD206 on CD14⁺ cells was significantly increased after the co-culture with OSCC cell lines, while the expressions of CD163 and CD204 on CD14⁺ cells showed no change. High concentrations of plasminogen activator inhibitor-1 (PAI-1) and interleukin-8 (IL-8) were detected in the conditioned medium of OSCC cell lines. PAI-1 and IL-8 stimulated CD14⁺ cells to express CD206. Moreover, there were positive correlations among the numbers of CD206⁺, PAI-1⁺, and IL-8⁺ cells in OSCC sections. These results suggest that PAI-1 and IL-8 produced by OSCC contribute to the differentiation of monocytes to CD206⁺ TAMs.     

Differentiation of molecules in a mixed self-assembled monolayer of H-and Cl-terminated bicyclo[2.2.2]octane derivatives

H-?and Cl-terminal groups of bicyclo[2.2.2]octane (BCO) derivatives in a mixed self-assembled monolayer (SAM) on Au(111) were imaged using a modified Si tip with a CaF(2) nanocluster to differentiate the two terminals, which have different electronegativities. In order to achieve this we fabricated a new sample holder, on which a CaF(2) single crystal and the mixed SAM on Au(111) could be mounted side by side. We transferred the holder with the two samples into a ultrahigh vacuum (UHV) atomic force microscopy (AFM) chamber. Upon cleaving the CaF(2) single crystal under UHV, a fresh and clean CaF(2)(111) surface parallel with the SAM surface appeared within 2?mm of the separation. The modified Si tip was prepared by repeatedly making contact between a Si tip and the CaF(2)(111) surface. The resulting modified tip could image the atomic periodicity of a Ca(2+) and an F(-) sublattice on the CaF(2)(111) surface depending on the sign of the tip-terminating ion, i.e.?an F(-) and a Ca(2+) ion, respectively, as reported previously (Foster et al 2002 Phys.?Rev.?B 66 235417). Using the modified Si tip with the known tip-terminating ion, we observed the Cl-terminal in the surrounding H-terminals in the mixed SAM by noncontact (NC) AFM. Here, the Cl-terminal is negatively charged due to its electronegativity and thus the BCO moiety with the Cl-terminal is terminated by a C(δ+)-Cl(δ-) permanent dipole, while the H-terminal is almost neutral. The Cl-terminal appeared brighter (more attractive) and darker (more repulsive) than the surrounding H-terminals in NC-AFM images depending on the sign of the tip-terminating ion, i.e.?a Ca(2+) and an F(-) on the modified tip, respectively, although the relationship between the image contrast and the sign of the tip-terminating ion was not always perfect because of the instability of the tip-terminating ion on the nanocluster. The present method can be used to distinguish terminal groups with different electronegativities.     

Direct Observation of k∥ and k⊥ Stripe Excitations in La2?x Sr x CuO4

The superconducting transition temperature in the cuprate is pointed to be enhanced by the self-organized spin-charge separated stripes. The magnetic excitations are very different in k?? and k???stripes. Therefore if one detects the different excitations, it is a clear evidence of the stripe. Neutron scattering, however, always observes the mixed excitations. We first succeeded to detect the k???stripe excitations of the separated dispersion induced by the super-lattice structure of the stripe in distinction from the k???stripe excitations by two-magnon Raman scattering. The stripe structure is ubiquitous in the whole carrier density range at low temperatures.     

关于龙安寺方丈庭园造园意图的考察

"龙安寺方丈庭园"是日本具有代表性的庭园,但其建造时期、建造者、建造意图都未有定论。本文认为此园是对中国五台山的描绘。自古以来五台山的文殊菩萨信仰非常兴盛,从8世纪开始有多位来自日本的高僧到访过五台山,并将佛像、绘画等带回了日本。以此为依据在13世纪绘制而成的"五台山文殊菩萨骑狮像",中央石峰的形态与"龙安寺方丈庭园"中央置石组群造型相同,可以推断"五台山文殊菩萨骑狮像"中的石峰是其描摹的原型。     

Acceleration of nonylphenol and 4-tert-octylphenol degradation in sediment by Phragmites australis and associated rhizosphere bacteria

We investigated biodegradation of technical nonylphenol (tNP) in Phragmites australis rhizosphere sediment by conducting degradation experiments using sediments spiked with tNP. Accelerated tNP removal was observed in P. australis rhizosphere sediment, whereas tNP persisted in unvegetated sediment without plants and in autoclaved sediment with sterile plants, suggesting that the accelerated tNP removal resulted largely from tNP biodegradation by rhizosphere bacteria. Three bacterial strains, Stenotrophomonas sp. strain IT-1 and Sphingobium spp. strains IT-4 and IT-5, isolated from the rhizosphere were capable of utilizing tNP and 4-tert-octylphenol as a sole carbon source via type II ipso-substitution. Oxygen from P. australis roots, by creating highly oxygenated conditions in the sediment, stimulated cell growth and the tNP-degrading activity of the three strains. Moreover, organic compounds from P. australis roots functioned as carbon and energy sources for two strains, IT-4 and IT-5, supporting cell growth and tNP-degrading activity. Thus, P. australis roots elevated the cell growth and tNP-degrading activity of the three bacterial strains, leading to accelerated tNP removal. These results demonstrate that rhizoremediation of tNP-contaminated sediments using P. australis can be an effective strategy.     

Effect of an Nb2O5 nanolayer coating on ZnO electrodes in dye-sensitized solar cells

Nanostructured porous zinc oxide electrodes for use in dye-sensitized solar cells (DSSCs) were coated with thin niobium oxide layers by using sol–gel transformation of niobium pentaethoxide in air. Coating solutions were prepared by mixing niobium pentaethoxide and ethanol. A dip-coating technique was adopted at a low withdrawal speed of 100 μm s⁻¹. The coated electrodes were then heat-treated at temperatures between 400 and 600 °C. The presence of niobium in the coated electrodes was confirmed by X-ray photoelectron spectroscopy. As expected, the niobium oxide layers worked as an energy barrier between the ZnO electrode and electrolyte. Open-circuit voltage (V_OC) of the cells using the coated electrodes was then enhanced up to 0.768 V, which was attributable to the suppression of the recombination of photogenerated electrons with oxidized species in electrolytes. An additional benefit of the coating was that grain growth of ZnO particles in the electrodes was hindered and short-circuit photocurrent density (J_SC) was kept relatively high due to large amounts of adsorbed dye. An overall light-to-electricity conversion efficiency was increased to a maximum of 5.19%, indicating that the proper coating technique was the key for improving the performance of ZnO-based DSSCs.