High-efficiency GaAs and GaInP solar cells grown by all solid-state molecular-beam-epitaxy

We report the initial results of GaAs and GaInP solar cells grown by all solid-state molecular-beam-epitaxy (MBE) technique. For GaAs single-junction solar cell, with the application of AlInP as the window layer and GaInP as the back surface field layer, the photovoltaic conversion efficiency of 26% at one sun concentration and air mass 1.5 global (AM1.5G) is realized. The efficiency of 16.4% is also reached for GaInP solar cell. Our results demonstrate that the MBE-grown phosphide-contained III-V compound semiconductor solar cell can be quite comparable to the metal-organic-chemical-vapor-deposition-grown high-efficiency solar cell.     

Chromatic adaptation in a 2D photograph demonstrated by a D‐up viewer

It is said that we cannot have color constancy in a photograph. The concept of recognized visual space of illumination (RVSI) asserts that chromatic adaptation occurs when one perceives the illumination that is filling a space and not the objects in the space. It predicts then that if one perceives a 3D scene in a photograph, then color constancy will occur in the photograph. In this work, a dimension‐up (D‐up) viewer was developed to perceive a 3D scene on a 2D photograph, and the effect of chromatic adaptation was measured by the color appearance of a gray patch placed at the center of the photograph. Subjects saw the patch as a vivid color when they saw a photograph that had been taken under colored illumination, which is a normal experience in a real space observation. When the color appearance was measured by the elementary color naming method, the amount of chromaticness of the patch in percentage and the apparent hue were very similar to those observed in the 2‐room technique, thus confirming the prediction by the RVSI theory.     

Optical Spectra of Synthetic Spinels in the System MgAl2O4–MgCr2O4

Unpolarized optical spectra were measured in the wavelength range 322–1666 nm by the diffuse reflection technique from spinel powders synthesized in the system MgAl₂O₄–MgCr₂O₄. The spectra were interpreted by the crystal-field theory on the basis of trigonally distorted spinel octahedra with D_3d symmetry. For chromium-rich solid solutions, including the MgCr₂O₄ end-member, results after peak fittings showed octahedral D_3d local symmetry around Cr³⁺ ions, identical to the crystallographic site symmetry. For chromium-poor solid solutions, however, octahedral C_3v local symmetry was suggested around Cr³⁺ ions, different from the D_3d crystallographically expected.     

Influence of Cu metal on the domain structure and carrier mobility in single-layer graphene

We demonstrate that domain structure of single-layer graphene grown by ambient pressure chemical vapor deposition is strongly dependent on the crystallinity of the Cu catalyst. Low energy electron microscopy analysis reveals that graphene grown using a Cu foil gives small and mis-oriented graphene domains with a number of domain boundaries. On the other hand, no apparent domain boundaries are observed in graphene grown over a heteroepitaxial Cu(111) film deposited on sapphire due to unified orientation of graphene hexagons. The difference in the domain structures is correlated with the difference in the crystal plane and grain structure of the Cu metal. The graphene film grown on the heteroepitaxial Cu film exhibits much higher carrier mobility than that grown on the Cu foil.     

Production of thin graphite sheets for a high electrical conductivity film by the mechanical delamination of ternary graphite intercalation compounds

Herein we propose a production scheme for conductive films composed of thin graphite sheets with high crystallinity and polymeric resin. The crystalline graphite sheets were successfully produced from natural graphite powder by solution-phase synthesis of graphite intercalation compounds (GICs), following a wet planetary-ball milling under mild conditions. The shear forces in the milling pot lead to a peeling of graphite flakes. Taking into consideration the interlayer bonding force, the delamination should be preferentially done from the expanded GICs interlayer rather than intrinsic graphite one. Some composite films derived from the phenolic resin and flaky graphite sheets displayed much higher electrical conductivities compared to the film from the feed graphite particles. We also demonstrate the stage structure of synthetic GICs affected the film conductivity. The composite films made from exfoliated products of ground (around stage IV) GICs exhibited high electrical conductivity with a small amount of the graphite sheets.     

新型Gemini阳离子表面活性剂的合成和性能（1）：从长链烷基二甲基胺及其盐酸盐和环氧氯丙烷合成双烷基双季铵盐阳离子

概述了从长链烷基二甲基叔胺及其盐酸盐和环氧氯丙烷或其他连接剂在温和条件下合成新型双烷基双季铵盐型阳离子表面活性剂的方法,产品的表面活性以及烷基链长、连接基团结构对产物表面活性的影响。     

Supramolecular Architectures of Nucleic Acid/Peptide Hybrids

Supramolecular architectures that are built artificially from biomolecules, such as nucleic acids or peptides, with structural hierarchical orders ranging from the molecular to nano-scales have attracted increased attention in molecular science research fields. The engineering of nanostructures with such biomolecule-based supramolecular architectures could offer an opportunity for the development of biocompatible supramolecular (nano)materials. In this review, we highlighted a variety of supramolecular architectures that were assembled from both nucleic acids and peptides through the non-covalent interactions between them or the covalently conjugated molecular hybrids between them.     

A theoretically reproduced phase diagram for vinylidene fluoride and trifluoroethylene copolymers

The phase diagram of ferroelectric copolymers of vinylidene fluoride and trifluoroethylene is reproduced theoretically using a simple model for ferroelectric polymers. The copolymerization ratio dependencies of the intramolecular interaction and the intermolecular interaction are induced to reproduce the phase diagram. These interactions have the following effects on the ferroelectric phase transition of the copolymers. The intermolecular interaction between vinylidene fluoride segments is dominant in the ferroelectric phase transition. The intramolecular interaction, discriminating between different chain conformations, gives the phase transition a variety of characters, including first and second order phase transitions. The copolymerization ratio dependence of the intermolecular interaction is also numerically estimated by summing the interaction energy between all atoms. Comparing these two results, we discuss the size of a segment carrying an elementary process of the phase transition.