Fabrication of CaCO3-Coated Vesicles by Biomineralization and Their Application as Carriers of Drug Delivery Systems

We fabricated CaCO₃-coated vesicles as drug carriers that release their cargo under a weakly acidic condition. We designed and synthesized a peptide lipid containing the Val-His-Val-Glu-Val-Ser sequence as the hydrophilic part, and with two palmitoyl groups at the N-terminal as the anchor groups of the lipid bilayer membrane. Vesicles embedded with the peptide lipids were prepared. The CaCO₃ coating of the vesicle surface was performed by the mineralization induced by the embedded peptide lipid. The peptide lipid produced the mineral source, CO₃²⁻, for CaCO₃ mineralization through the hydrolysis of urea. We investigated the structure of the obtained CaCO₃-coated vesicles using transmission electron microscopy (TEM). The vesicles retained the spherical shapes, even in vacuo. Furthermore, the vesicles had inner spaces that acted as the drug cargo, as observed by the TEM tomographic analysis. The thickness of the CaCO₃ shell was estimated as ca. 20 nm. CaCO₃-coated vesicles containing hydrophobic or hydrophilic drugs were prepared, and the drug release properties were examined under various pH conditions. The mineralized CaCO₃ shell of the vesicle surface was dissolved under a weakly acidic condition, pH 6.0, such as in the neighborhood of cancer tissues. The degradation of the CaCO₃ shell induced an effective release of the drugs. Such behavior suggests potential of the CaCO₃-coated vesicles as carriers for cancer therapies.     

Quantitative Visualization of the Interaction between Complement Component C1 and Immunoglobulin G: The Effect of CH1 Domain Deletion

Immunoglobulin G (IgG) adopts a modular multidomain structure that mediates antigen recognition and effector functions, such as complement-dependent cytotoxicity. IgG molecules are self-assembled into a hexameric ring on antigen-containing membranes, recruiting the complement component C1q. In order to provide deeper insights into the initial step of the complement pathway, we report a high-speed atomic force microscopy study for the quantitative visualization of the interaction between mouse IgG and the C1 complex composed of C1q, C1r, and C1s. The results showed that the C1q in the C1 complex is restricted regarding internal motion, and that it has a stronger binding affinity for on-membrane IgG2b assemblages than C1q alone, presumably because of the lower conformational entropy loss upon binding. Furthermore, we visualized a 1:1 stoichiometric interaction between C1/C1q and an IgG2a variant that lacks the entire C_H1 domain in the absence of an antigen. In addition to the canonical C1q-binding site on Fc, their interactions are mediated through a secondary site on the C_L domain that is cryptic in the presence of the C_H1 domain. Our findings offer clues for novel-modality therapeutic antibodies.     

Deposition of Lead Phosphate by Lead-Tolerant Bacteria Isolated from Fresh Water near an Abandoned Mine

Specialist bacteria can synthesize nanoparticles from various metal ions in solution. Metal recovery with high efficiency can be achieved by metal-tolerant microorganisms that proliferate in a concentrated metal solution. In this study, we isolated bacteria (Pseudomonas sp. strain KKY-29) from a bacterial library collected from water near an abandoned mine in Komatsu City, Ishikawa Prefecture, Japan. KKY-29 was maintained in nutrient medium with lead acetate and synthesized hydrocerussite and pyromorphite nanoparticles inside the cell; KKY-29 also survived nanoparticle synthesis. Quantitative PCR analysis of genes related to phosphate metabolism showed that KKY-29 decomposed organic phosphorus to synthesize lead phosphate. KKY-29 also deposited various metal ions and synthesized metal nanoparticles when incubated in various metal salt solutions other than lead. The present study considers the development of biotechnology to recover lead as an economically valuable material.     

Cause–effect analysis on Fukushima accident reports – What did McMaster undergraduate students learn?

In the ENG PHYS 4ES3 Course “Special Topics in Energy Systems (2014–2015)” in McMaster University, sixteen 4th-year undergraduate students studied the Fukushima accident, discussed the causes of accident and its impacts on the energy systems from the sustainability point of view, made the oral presentation and submitted the reports. In this paper, a cause–effect and causal-loop analysis was applied to the discussion in the reports, the diagram of cause–effect relationship was drawn, and the important problems were extracted from the diagram. It was found that the important problems and the diagram of cause–effect relationship McMaster undergraduate students considered were similar to the essential problems and the diagram Horii pointed out, although Interim Report of the Investigation Committee on the Accident at Fukushima Nuclear Stations of Tokyo Electric Power Company which Horii used was not adopted in the reports submitted by students.     

Biosynthesis of PP-V, a monascorubramine homologue, by Penicillium sp. AZ

The biosynthetic pathway of PP-V, a new monascorubramine homologue, was elucidated by 13C-labeling studies. The [1-13C] of acetate was incorporated into 2-, 3a-, 4a-, 6-, 8-, 9-, 11-, 13-, 15-, 17-, and 19-Cs of PP-V, and the [2-13C], into 3-, 4-, 5-, 8a-, 9a-, 10-, 12-, 14-, 16-, 18-, and 20-Cs. These incorporation patterns coincide with those reported in the biosynthesis of a Monascus azaphilone pigment, monascorubrin.     

High-throughput immunophenotyping by surface plasmon resonance imaging

Cell binding assays on antibody arrays permit the rapid immunophenotyping of living cells. The throughput of the analysis, however, is still limited due to our inability to perform parallel and quantitative detection of cells captured on the array. To address this limitation, we employed here an imaging technique based on surface plasmon resonance (SPR). SPR has been frequently used to monitor capture of proteins on antibody microarrays, while few cases were reported for capture of cells. Antibody arrays were prepared through the photopatterning of an alkanethiol monolayer on a gold-evaporated glass plate and the subsequent immobilization of various antibodies onto 4-9 separate spots created by photopatterning. A glass slip was mounted onto the array with a thin spacer to construct a parallel-plate chamber. Leukemia cells were injected into the chamber to conduct a binding assay, while refractive index changes at the vicinity of the array surface were monitored by SPR imaging. We observed that SPR signals were intensified on specific antibody spots but not on nonspecific spots. Confocal laser scanning microscopy revealed that the observed SPR signals were attributed to cell deformations caused by multivalent interactions with immobilized antibody, which effectively elevated the refractive index of a medium phase within an evanescent field. This effect could be suitably utilized to monitor quantitatively cell binding to multiple spots from a heterogeneous cell population.     

Design and control of a microrobotic system using magneticlevitation

Presents a prototype microrobot based on magnetic principles. Miniature items are to be transported and assembled in hazardous environments. A microrobot can be remotely operated with 3 DOF in an enclosed environment by transferring magnetic energy and optical signals from outside. The magnetic drive unit consists of 8 electromagnets (4 pairs), 2 permanent magnets, a return yoke and a pole piece. The microrobot is manipulated under the pole piece by regulating magnetic field. It consists of a magnetic head, a body (electronic circuit and batteries), and copper alloy ribbon ringers. A shape memory alloy actuator activates the fingers by illuminating/extinguishing several LED. PID controls were applied. To cope with uncertainties and variations in payload masses, an adaptive control law was also employed for positioning along the z axis to enable the controller parameters to be adjusted in real-time. Effectiveness of the control was verified by the results of several experiments. The microrobot has a net mass of 8.1 g and it can elevate and manipulate objects with masses up to 1.5 g within a volume of 29×29×26 mm³ with a precision of 0.05 mm     

Effects of an antiallergic drug, pemirolast potassium on tyrosine phosphorylation and map kinase activation in antigen-stimulated rat basophilic leukemia (RBL-2H3) cells

Aggregation of high affinity IgE Fc receptors (Fc epsilon RI) on RBL-2H3 cells results in tyrosine phosphorylation of 33-, 42-, 44-, 72-, 80-, 90-, 125-kDa proteins. The 42 and 44 kDa proteins were identified as mitogen-activated protein (MAP) kinases with immunoblotting of anti-MAP kinase antibody. The effects of an antiallergic drug, pemirolast potassium (TBX) on Ag-induced protein tyrosine phosphorylation and MAP kinase activation were investigated. When RBL-2H3 cells were stimulated with Ag in the presence of TBX, tyrosine phosphorylation of three proteins (33, 42 and 44 kDa) was inhibited concentration-dependently (0.1-10 micrograms/ml). Inhibition of Ag-induced tyrosine phosphorylation of 33 kDa protein, which could be a beta subunit of Fc epsilon RI, suggests that TBX may prevent the activation of Fc epsilon RI. TBX suppressed activation of MAP kinases (42 and 44 kDa) in response to Ag as well as phorbol myristate acetate (100 nM) or calcium ionophore A23187 (500 nM), implying that the drug acts on signal transduction component(s) between the second messengers and MAP kinases. However, TBX had no effects on protein tyrosine phosphorylation and MAP kinase activation in MC3T3-E1 osteoblastic cells. These results indicate that TBX may affect Fc epsilon RI and also may act as a step distal of Ca2+ mobilization and protein kinase C activation leading to MAP kinase activation in RBL-2H3 cells.     

Study on the beam transport from the Bio-Nano ECRIS

The beam transport of N(+) ion and C(60)(+) ion in the Bio-Nano ECRIS with min-B configuration was investigated based on the ion beam profiles. The N(+) beam could be focused under the low-beam current conditions. Also the C(60)(+) beam could be focused in spite of the large space-charge effect which will lead the divergence of the beam. We confirmed that our beam transport system works well even for the C(60)(+) ion beam. We estimated the highest C(60)(+) beam current with the focused beam profile by comparing the N(+) ion beam.