Antioxidant effects of flavonoids used as food additives (purple corn color, enzymatically modified isoquercitrin, and isoquercitrin) on liver carcinogenesis in a rat medium-term bioassay

To clarify the effects of purple corn color, enzymatically modified isoquercitrin (EMIQ), and isoquercitrin (IQ), registered as natural food additives in Japan, on liver carcinogenesis in vivo, a medium-term bioassay was employed. A total of 100 male F344 rats were divided into 5 groups; groups 1 to 4 were given a single intraperitoneal injection of diethylnitrosamine (200 mg/kg b.w.) on day 1. From weeks 2 to 8, they were administered basal diet purple corn color, EMIQ, or IQ as containing test chemicals at doses of 1.0% (groups 1 and 5), 0.1% (group 2), 0.01% (group 3), or 0% (group 4) (experiments 1, 4, and 5). All rats were subjected to two-thirds partial hepatectomy at week 3 and were sacrificed at week 8. Purple corn color exerted no significant modifying effects on GST-P positive foci, preneoplastic foci, development in the liver. However, serum of rats treated with purple corn color provided evidence of antioxidant power significantly by potential antioxidant (PAO) test in vivo (experiment 2). And microarray analyses showed purple corn color to induce RNA expression such as P450 (cytochrome) oxidoreductase, phosphatidylinositol 3-kinase, and phospholipase A2 (experiment 3). Higher doses of EMIQ or IQ with strong antioxidant power in vivo by PAO test treated groups were correlated with smaller numbers of GST-P positive foci, with Spearman's rank correlation coefficients of P= 0.002 and P= 0.049, respectively (experiments 4 and 5). Therefore, the tested food additives may be effective as antioxidants in vivo and have chemopreventive potential against liver preneoplastic lesion development.     

Simulation of kinetic analysis on terpolymerization of styrene/butyl methacrylate/methacrylic acid system

The simultaneous differential equations which connected the copolymerization kinetics of the component reaction in the multi-copolymerization system with the changing rate of the concentration of each monomer and radical, the concentration and the molecular weight of the polymer obtained are analysed in a number of ways. The distribution of the components and the degree of polymerization are also simulated. The styrene/butyl methacrylate/methacrylic acid terpolymerization system, using carbon tetrachloride as solvent and benzoyl peroxide as initiator, was chosen. The simulation model which satisfied the experimental values of the concentration of the multiple components in the system, the composition and molecular weight distribution and the number of chlorine atoms introduced into the copolymer ends is established. When the time interval changed, the effects on the distribution of the composition in copolymers and the distribution of the degree of polymerization were also calculated.     

Role of network nematicity in swelling and phase equilibria of polymer networks in nematic solvents

Swelling and phase equilibria of polymer networks in a low molecular mass liquid crystal (LC) have been investigated as a function of network nematicity. LC networks with varying nematicity were prepared by copolymerization of mixtures of mesogenic monomers and non-mesomorphic (styrene) monomers with various compositions. Molar fraction of mesogenic monomer (x) in copolymer network strongly influences the swelling behavior as well as the nematic-isotropic (N-I) transitions in both dry and swollen states. The swollen networks of sufficiently high x with strong nematicity exhibit a sharp N-I transition and simultaneously undergo a discontinuous change in gel volume, i.e. volume phase transition. Meanwhile, the swollen networks of x≤0.8 with less nematicity show a broad N-I transition, and the resulting volume change proceeds continuously over a finite temperature range. When x decreases further down to less than 0.5, the nematicity of the dry networks vanishes. The nematic ordering in the swollen copolymer networks of x<0.5 occurs at the same temperature as the N-I transition temperature of the pure nematic solvent (T_NI^S), which yields the inflection in the swelling-temperature curve. A mean field theory considering network nematicity as a variable describes the effects of x on volume phase transition such as a shift of T_NI^G and a change in the magnitude of volume transition, apart from the emergence of continuous volume transition due to the broad N-I transition. The purely isotropic network of x=0 appreciably swells in the nematic solvent. The solvent inside the gel forms the nematic phase at the temperatures below which conflicts with the classical theoretical prediction that nematic ordering of LC solvent in fully swollen isotropic network never occurs.     

The effects of acrylate monomers and polystyrene addition on the morphology of DOP‐plasticized styrene–acrylate polymer particles prepared by SPG emulsification and suspension polymerization

Fairly uniform copolymer particles of methyl acrylate (MA), butyl acrylate (BA), or butyl methacrylate (BMA) were synthesized via Shirasu porous glass (SPG) membrane and followed by suspension polymerization. After a single‐step SPG emulsification, the emulsion composed mainly of the monomers. Hydrophobic additives of dioctyl phthalate (DOP), polystyrene molecules, and an oil‐soluble initiator, suspended in an aqueous phase containing poly(vinyl alcohol) (PVA) stabilizer and sodium nitrite inhibitor (NaNO₂), were subsequently subjected to suspension polymerization. Two‐phase copolymers with a soft phase and a hard phase were obtained. The composite particles of poly(St‐co‐MA)/PSt were prepared by varying the St/PSt ratios or the DOP amount. The addition of PSt induced a high viscosity at the dispersion phase. The molecular weight slightly increased with increasing St/PSt concentration. The multiple‐phase separation of the St‐rich phase and PMA domains, observed by transmission electron microscopy, was caused by composition drift because the MA reactivity ratio is greater than that of St. The addition of DOP revealed the greater compatibility between the hard‐St and soft‐MA moieties than that without DOP. The phase morphologies of poly(St‐co‐MA), poly(St‐co‐BMA), and their composites with PSt were revealed under the influence of DOP. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1195–1206, 2006     

Dynamic analysis and optimum design for control of beams with time-dependent changes of length

Structural systems with longitudinal mass flow can be seen in belt-conveyers, running magnetic tapes and flexible manipulators, etc. Transverse vibration problems of flexible longitudinally extensible beams are considered as a special class of vibration problems of structural systems with longitudinal mass flow. The optimum design problem to control the dynamic response of such structural systems is very important from engineering and practical viewpoints, but until now it has not been the subject of much study.Based on the method of dynamic response analysis of extensible beams presented in the authors' previous studies, a method of sensitivity analysis of dynamic response is presented in this paper. Utilizing the obtained sensitivities of the response with respect to design parameters, such as mass flow velocity, tension and rigidity etc., a new optimum design method to control the responses of such structural systems is also presented.     

Induction of gene expression of antibacterial proteins by chitin oligomers in the silkworm, Bombyx mori

A 71-year-old male with advanced gastric carcinoma with paraaortic lymph node metastases underwent distal gastrectomy. Cisplatin (CDDP) 50 mg/body was administered intravenously (i.v.) on day 1 followed by the administration of 5-fluorouracil 500 mg/body/day i.v. on day 2 through day 7. After two courses of this regimen, further enlargement of paraaortic lymph nodes was revealed by CT scan, and chemotherapy was suspended. Multiple liver and lung metastases were diagnosed 6 months after initial diagnosis, and mitomycin C (MMC) 10 mg/body i.v. was administered on day 1 followed by CDDP 50 mg/body i.v. on day 2. After three courses of this regimen, partial response of the liver metastases and complete response of the lung metastases were observed, and the general condition was markedly improved without any adverse effect except slight nausea. Though the patient died of brain metastases one year after initial diagnosis, the combination chemotherapy with MMC and CDDP was nevertheless thought to improve his quality of life.     

Separation–permeation performance of porous Si3N4 ceramics composed of columnar β-Si3N4 grains as membrane filters for microfiltration

The separation–permeation performance of porous silicon nitride (Si₃N₄) ceramics (consisting of columnar grains connected at random in three dimensions) as membrane filters was evaluated, and compared with commercial Al₂O₃ membranes having a three-layer structure. Si₃N₄ membranes separate particles with diameters much less than their pore diameters. The permeability of Si₃N₄ membranes with separability values the same as those of the Al₂O₃ membranes was about 1.3–2.4 times as large as the Al₂O₃ membranes. Dead-end filtration examination, using Al₂O₃ particles with a particle size distribution, indicated that the Si₃N₄ membrane filtration mechanism obeyed the cake filtration mechanism although the particle size was smaller than the pore size of the Si₃N₄ membranes.     

Morphology development of 10‐μm scale polymer particles prepared by SPG emulsification and suspension polymerization

Classicalparticle morphologies, core‐shell, hemisphere, sandwich, and so on, were all reproducible by starting from ca. 10‐μm uniform droplets composed of monomers, initiator, solvents, and polymer, and polymerizing them by subsequent suspension polymerization. SPG (Shirasu porous glass) membrane was employed to form uniform size droplets having the coefficient of variation (CV) around 10%. Styrene (ST) and acrylic monomers were used as monomers, and their polymers were dissolved in the droplets to investigate the development of phase separation. When hydrophilic methyl methacrylate (MMA) was polymerized in the droplets with a mixed solvent consisting of hydrophilic hexanol (HA) and hydrophobic benzene and hexadecane (HD), the resulting morphology shifted from hemisphere to sandwich and eventually to PMMA/solvent core‐shell with increasing hydrophilicity of the mixed solvent. The sandwich was converted to the core‐shell after several weeks elapsed. As styrene was added to MMA, the morphology shifted from hemisphere core/solvent shell to raspberry core/solvent shell as the fraction of ST increased. The domain of the mixed solvent in the raspberry core was reduced with increasing the hydrophilicity of the mixed solvent. All these morphologies were eventually converted to the copolymer core/solvent shell. When a mixed monomer of styrene and MMA dissolving polystyrene (PS) was polymerized, the resulting morphology shifted from salami to core‐shell with increasing the MMA fraction in the comonomer. The salami particles were then swollen with toluene, and after the swelling, toluene was removed under the different temperature and pressure. The final particle morphology converted to the core‐shell with a milder rate of toluene removal which was predicted from the thermodynamic model. When styrene and cyclohexyl acrylate (CHA), a pair with widely different reactivity ratios, were copolymerized, salami morphologies, with tiny CHA‐rich domains dispersed in the matrix, were obtained even at a higher fraction of CHA in comonomer. Effects of glass transition temperature of the polymers, molecular weight, and the composition of copolymers were taken in consideration whenever the final morphologies were discussed. By these experiments, the authors tried to demonstrate an advantage of using large uniform spheres for the particle morphology studies. SPG emulsification technique was a potential tool because of its free formulation of the droplets, and the subsequent polymerization could undergo without the breakup or coalescence of the droplets. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2200–2220, 2001     

An inverse analysis of two-phase Stefan problems using imaginary heat sources

This paper presents a new methodology for the inverse analysis of time-dependent two-phase Stefan problems. The problem considered here is that of determining the time dependence of a phase-change interface at several observed temperatures. In our method, imaginary heat sources are arranged in an imaginary domain and then the phase-change interface is identified as the isothermal surface at the melting temperature by controlling the imaginary heat source intensities. Using delta-function imaginary heat sources and their corresponding Green functions, which are pre-calculated numerically, it is shown that the phase-change interface is determined non-iteratively at each time step. We offer numerical examples to demonstrate the capability of the proposed method. © 1998 Scripta Technica, Heat Trans Jpn Res, 27(3): 179–191, 1998