Synchronized transform-limited operation of 10-GHz colliding pulse mode-locked laser

We report a 10-GHz colliding pulse mode-locked laser fabricated with integrated active-passive waveguides. The laser fabrication adopted a deep reactive ion etching and single-step metal-organic vapor phase epitaxy regrowth process for forming the buried heterostructure waveguide. Clean output pulses resulted from laterally tilting the active-passive interface and effectively suppressing residual back-reflections at the interface. Hybrid mode-locking resulted in a synchronized transform-limited sech/sup 2/optical waveform. Pulsewidth, chirp, timing jitter, and frequency-locking range were investigated through systematic device biasing condition optimization.     

Indium oxide thin film based ammonia gas and ethanol vapour sensor

A sensor for ammonia gas and ethanol vapour has been fabricated using indium oxide thin film as sensing layer and indium tin oxide thin film encapsulated in poly(methyl methacrylate) (PMMA) as a miniature heater. For the fabrication of miniature heater indium tin oxide thin film was grown on special high temperature corning glass substrate by flash evaporation method. Gold was deposited on the film using thermal evaporation technique under high vacuum. The film was then annealed at 700 K for an hour. The thermocouple attached on sensing surface measures the appropriate operating temperature. The thin film gas sensor for ammonia was operated at different concentrations in the temperature range 323–493 K. At 473 K the sensitivity of the sensor was found to be saturate. The detrimental effect of humidity on ammonia sensing is removed by intermittent periodic heating of the sensor at the two temperatures 323K and 448 K, respectively. The indium oxide ethanol vapour sensor operated at fixed concentration of 400 ppm in the temperature range 293–393 K. Above 373 K, the sensor conductance was found to be saturate. With various thicknesses from 150–300 nm of indium oxide sensor there was no variation in the sensitivity measurements of ethanol vapour. The block diagram of circuits for detecting the ammonia gas and ethanol vapour has been included in this paper.     

Possible Phase Transition at Low mK Temperatures in Liquid Helium Mixture Films Adsorbed on Graphite

We report heat capacity and magnetisation measurements of ³He adsorbed on the surface of graphite plated with three atomic layers of ⁴He. For ³He coverages n ₃>4 nm^?2 the heat capacity corresponds to a 2D Fermi fluid. The inferred hydrodynamic mass of the ³He quasiparticles is 1.38±0.05 m₃. The ³He effective mass ratio increases with coverage to 2.4 at n ₃=4 nm^?2, due to Fermi liquid interactions. The heat capacity isotherm exhibits a steplike increase centred on n ₃=4.5 nm^?2, similar to that previously observed on four layers of ⁴He. This is associated with the population of the first excited Andreev surface bound state. However, in the present case, as n ₃ is increased through the step a pronounced anomalous feature develops in the temperature dependence of the heat capacity, around 10 mK. Below 5 mK the heat capacity is approximately linear in temperature. With n ₃=7 nm^?2, we find that this behaviour is very sensitive to small changes in the ⁴He third layer coverage, around the completed third layer. Measurements of the ³He magnetisation,, by continuous wave NMR methods, find a significant increase with decreasing temperature below around 20 mK. Together the data suggest that a phase transition takes place in the film at low mK temperatures.     

Use of GafChromic film to diagnose laser generated proton beams

A calibration of three types of GafChromic radiochromic film (HS, MD-55, and HD-810) was carried out on the Crocker Nuclear Laboratory's 76 in. cyclotron at UC Davis over doses ranging from 0.001 to 15 kGy. The film was digitized with a scanning microdensitometer with which it was scanned twice with two different filters to increase the film's effective dynamic range. We demonstrate how this calibrated film can be used to measure the spectrum and total energy of a laser generated proton beam. This technique was applied to an experiment on the 10 J, 100 fs Callisto laser at Lawrence Livermore National Laboratory. The resulting proton spectrum was compared to that obtained by simultaneous measurement of Ti nuclear activation; the two methods give the same proton beam slope temperature and agree in number of protons to within 27%.     

Simulating ion beam extraction from a single aperture triode acceleration column: a comparison of the beam transport codes IGUN and PBGUNS with test stand data

Ion beam extraction from two different ion sources with single aperture triode extraction columns was simulated with the particle beam transport codes PBGUNS and IGUN. For each ion source, the simulation results are compared to experimental data generated on well-equipped test stands. Both codes reproduced the qualitative behavior of the extracted ion beams to incremental and scaled changes to the extraction electrode geometry observed on the test stands. Numerical values of optimum beam currents and beam emittance generated by the simulations also agree well with test stand data.     

The level of polyaromatic hydrocarbons in kajal and surma of major Indian brands

Kajal and surma are eye cosmetics extensively used in Indian subcontinent. Kajal is prepared by burning of vegetable oil and butter oil while surma by grinding of the stones. High performance liquid chromatography and gas chromatography–mass spectrometry instruments were used for quantification and confirmation of 16 polyaromatic hydrocarbons (PAHs). Significant concentration of PAH was found in all the samples examined. The median concentration of PAH ranged from 0.14 (lowest, anthracene) to 31.18 μg g⁻¹ [dibenz(a,h)anthracene] in kajal sample and from not detectable concentration (naphthalene) to 197.47 μg g⁻¹ of benzo(a)pyrene in surma sample. Fifteen PAHs were detected in all the samples. Therefore the use of kajal and surma in eye should be strictly restricted.     

Kinetics of colour and texture changes in Gulabjamun balls during deep-fat frying

Gulabjamun, a popular Indian milk sweet, is prepared by deep-fat frying of balls of dough made of khoa, wheat flour and baking powder, and subsequent dipping in sugar syrup. Kinetics of colour and texture changes in gulabjamun balls were investigated with regard to frying temperature (120, 130, 140 °C). Crust colour was evaluated in terms of CIELAB parameters L*, a*, b*, and ΔE, and rheological properties in terms of hardness, stiffness and firmness. Frying-induced surface browning was reflected in a decreasing lightness value L* as well as the ratio of yellow hue index b* and red hue index a* and total colour expressed in terms of ΔE, L* following a zero-order change whereas the other parameters, a first-order change. Increase in the texture parameters hardness and firmness followed zero-order reaction kinetics whereas stiffness rise followed a first-order reaction. The temperature dependence of reaction constants could be explained by the Arrhenius equation. Activation energy was also obtained for both the colour and texture changes, which were in the range of 24.5-77.6 kJ/mol. High correlations between colour and texture parameters were observed and it was concluded that L* alone could be used to predict the firmness of deep-fat fried gulabjamun balls.     

Genome-wide bacterial toxicity screening uncovers the mechanisms of toxicity of a cationic polystyrene nanomaterial

By exploiting a genome-wide collection of bacterial single-gene deletion mutants, we have studied the toxicological pathways of a 60-nm cationic (amino-functionalized) polystyrene nanomaterial (PS-NH(2)) in bacterial cells. The IC(50) of commercially available 60 nm PS-NH(2) was determined to be 158 μg/mL, the IC(5) is 108 μg/mL, and the IC(90) is 190 μg/mL for the parent E. coli strain of the gene deletion library. Over 4000 single nonessential gene deletion mutants of Escherichia coli were screened for the growth phenotype of each strain in the presence and absence of PS-NH(2). This revealed that genes clusters in the lipopolysaccharide biosynthetic pathway, outer membrane transport channels, ubiquinone biosynthetic pathways, flagellar movement, and DNA repair systems are all important to how this organism responds to cationic nanomaterials. These results, coupled with those from confirmatory assays described herein, suggest that the primary mechanisms of toxicity of the 60-nm PS-NH(2) nanomaterial in E. coli are destabilization of the outer membrane and production of reactive oxygen species. The methodology reported herein should prove generally useful for identifying pathways that are involved in how cells respond to a broad range of nanomaterials and for determining the mechanisms of cellular toxicity of different types of nanomaterials.     

Duty Cycle Characteristics for DC Servo Motors

This paper describes methods of calculating the peak temperature rise of the armature winding of a dc servo motor when operated on a specific duty cycle and for torque values greater than rated. It also defines the relationship of the maximum allowable time ON (tR) for a desired output torque such that the peak temperature rise will not exceed the temperature rating of the insulation thus ensuring adequate insulation life. A new approach of specifying these duty cycle characteristics is suggested which can be used to find the maximum time ON (tR) for a given torque as well as the peak temperature rise for any length of time ON (t1). The use of these characteristics can be extended from repetitive cycles to duty cycles where output torque requirements within a cycle are varying. This analytical approach is supported by experimental data.     

TIO2/Nanoclay nanocomposite for phenol degradation in sonophotocatalytic reactor

A TiO₂–nanoclay nanocomposite was used as a photocatalyst for the degradation of phenol in presence of acoustic cavitation. TiO₂–nanoclay nanocomposite was synthesised in benzyl alcohol medium wherein TiO₂ nanoparticles were formed between the nanoclay platelets. The synthesised product was characterised by using FTIR, XRD and TEM techniques. TEM image shows that TiO₂–nanoclay nanocomposite particles were in the range of 30–40 nm. XRD gram confirms the formation of nanocomposite of TiO₂ nanoclay. The effect of cavitation and TiO₂–nanoclay nanocomposite photocatalyst on phenol removal was investigated. The effects of various parameters such as nanocomposite loading, initial concentration, etc., have been studied. On comparing the results obtained with that of nanocomposite without UV, it was found for an initial concentration of 500 mg/L of phenol, the TiO₂–nanoclay nanocomposite exhibited higher percentage of pollutant removal (59%) and for nanoclay it was 47%. © 2011 Canadian Society for Chemical Engineering