Synthesis and properties of N-alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide)

N′-Alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide) (alkyl = isobutyl, pentyl, hexyl, octyl, etc.; aryl = phenyl, p-tolyl, p-methoxyphenyl, etc.) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with arylamines (aniline, p-toluidine, p-anisidine, o-phenylenediamine, etc.). The properties of these derivatives as pigments were tested, and also the thermal stability of 3,4:9,10-perylenebis(dicarboximide) derivatives was measured.     

Protective effect of phytic acid hydrolysis products on iron-induced lipid peroxidation of liposomal membranes

Beneficial effects of dietary phytic acid (myo-inositol hexaphosphate; IP₆) have often been explained by its strong iron ion-chelating ability, which possibly suppresses iron ion-induced oxidative damage in the gastrointestinal tract. Because phytic acid is hydrolyzed during digestion, this work aimed to know whether its hydrolysis products (IP_2′ IP_3′, IP_4′ and IP₅) could still prevent iron ion-induced lipid peroxidation. Studies using liposomal membranes demonstrated that hydrolysis products containing three or more phosphate groups are able to inhibit iron ion-induced lipid peroxidation although their effectiveness decreased with dephosphorylation. Similarly, they also prevented iron ion-induced decomposition of phosphatidylcholine hydroperoxide. These results demonstrate that intermediate products of phytic acid hydrolysis still possess iron ion-chelating ability, and thus they can probably prevent iron ion-induced lipid peroxidation in biological systems.     

Critical temperature for production of MAG by esterification of different FA with glycerol using <Emphasis Type="Italic">Penicillium camembertii</Emphasis> lipase

Production of MAG by a lipase-catalyzed reaction is known to be effective at low temperature. This phenomenon can be explained by assuming that synthesized MAG are excluded from the reaction system because MAG, which have low m.p., are solidified at low temperatures. Consequently, MAG are efficiently accumulated and do not serve as the precursor of DAG. If this hypothesis is correct, the critical temperature for MAG production, defined as the highest temperature at which DAG synthesis is repressed, should depend on the m.p. of the MAG. Esterification of FFA with glycerol using Candida rugosa, Rhizopus oryzae, and Penicillium camembertii lipases produced MAG efficiently at low temperatures. However, Candida lipase showed very low esterification activity at high temperatures (>20°C), and Rhizopus lipase produced not only MAG but also DAG even at low temperatures. Meanwhile, P. camembertii lipase catalyzed synthesis of MAG only from FFA and glycerol at low temperatures, although the enzyme catalyzed synthesis of DAG from MAG in addition to synthesis of MAG at high temperatures. We thus studied the effect of temperature on esterification of C₁₀−C₁₈ FFA with glycerol using Penicillium lipase as a catalyst and determined the critical temperatures for production of MAG. The critical temperature for production of each MAG showed a linear correlation with m.p. of the MAG, which supported the hypothesis. In addition, because the m.p. of MAG are estimated from that of the constituent FA, the optimal temperature for production of MAG can be predicted from the m.p. of the FFA used as a substrate.     

Reduction of fatty acid hydroperoxides by human parotid saliva

Arachidonic acid hydroperoxide (15-hydroperoxyeicosatetraenoic acid; 15-HPETE) was introduced into human parotid saliva and incubated at 37°C. Straight phase high-performance liquid chromatography analysis of the reaction mixture showed that 15-HPETE was detoxified to its reduced form, 15-hydroxyeicosatetraenoic acid, in the presence of glutathione. Therefore, it is concluded that human parotid saliva possesses fatty acid hydroperoxide-reducing ability. However, its effectiveness was found to be lower than that of blood plasma.     

Fractionation and enrichment of CLA isomers by selective esterification with Candida rugosa lipase

A commercial product of CLA contains almost equal amounts of cis-9,trans-11 (c9,t11)-CLA and trans-10,cis-12 (t10,c12)-CLA. We attempted to enrich the two isomers by a two-step selective esterification using Candida rugosa lipase that acted on c9,t11-CLA more strongly than on t10,c12-CLA. An FFA mixture containing CLA isomers was esterified with an equimolar amount of lauryl alcohol in a mixture of 20% water and the lipase. When the esterification of total FA reached 50%, two isomers were fractionated in a good yield: t10,c12-CLA was enriched in FFA, and c9,t11-CLA was recovered in lauryl esters. The FFA were esterified again to enrich t10,c12-CLA. At 27.3% esterification of total FA, the t10,c12-CLA content in FFA increased to 64.8 wt% with 89.3% recovery: The ratio of the content of t10,c12-CLA to that of two isomers was 95.9%. Lauryl esters obtained by the single esterification were employed for enrichment of c9,t11-CLA. After the esters were hydrolyzed, the resulting FFA were esterified again with lauryl alcohol. At 62.0% esterification of total FA, the c9,t11-CLA content in lauryl esters increased to 73.3 wt% with 79.4% recovery: The ratio of the content of c9,t11-CLA to that of two isomers was 95.6%. In a 600-g-scale purification, molecular distillation was effective in separating the reaction mixture into lauryl alcohol, FFA, and lauryl ester fractions.     

A Face Identification System Based on the Mahalanobis–Taguchi System

In this paper, we propose a face identification system based on the Mahalanobis–Taguchi System (MTS). The MTS is one of the pattern recognition methods frequently used in quality engineering, and can perform robust pattern recognition by using training data, including noise. It is likely that this advantage will allow the effective implementation of a robust face identification system against lighting and face position fluctuations. Moreover, the MTS can optimize the number of attributes required for identification by using the orthogonal array and the signal/noise (SN) ratio. The face identification system has to deal with many users and the amount of data in a facial image is large. Therefore, the time required for identification can be decreased and the amount of data in the facial image database can be reduced by performing the optimization. We confirmed the effectiveness of the proposed system through practical experiments. The experimental results revealed that the MTS was an effective method for robust face identification, and could effectively reduce the number of attributes required for identification.     

Analysis of PD-generated SF/sub 6/ decomposition gases adsorbed on carbon nanotubes

Chemical byproducts analysis has been recognized as a powerful diagnosis method for SF₆ gas-insulated switchgear (GIS). The authors have previously demonstrated that a carbon nanotube (CNT) gas sensor could detect partial discharge (PD) generated in SF₆ gas. However, PD-generated decomposition gas species, which were responsible for the CNT gas sensor response, have not been identified yet. In this paper, two kinds of experiments were conducted in order to identify the responsible decomposition gas species. At first, the decomposition gas molecules adsorbed on CNTs were analyzed by Fourier transformation infrared (FTIR) spectroscopy. FTIR absorbance was observed around 735 cm^-1 after CNTs were exposed to PD generated in SF₆. In the second experiment, the CNT gas sensor responses to typical SF₆ decomposition products (HF and SF₄) were examined. The CNT gas sensor responded to these gases in the same way as to PD generated in SF₆. SF₄ response was larger than HF response. Based on these results, SF ₄ and SOF₂ emerged as candidates for the responsible decomposition gases. Electrochemical interactions between adsorbed gas molecules and CNT were discussed based on theoretical predictions of molecular orbital calculations. The calculation results suggested that both of SOF₂ and SF₄ could increase the CNT gas sensor conductance     

Bag of local landscape features for fitness landscape analysis

Evolutionary computation is a research field dealing with black-box and complex optimization problems whose fitness landscapes are usually unknown in advance. It is difficult to select an appropriate evolutionary algorithm and parameters for a given problem due to the black-box setting although many evolutionary algorithms have been developed. In this context, several landscape features have been proposed and their usefulness examined for understanding the problem. In this paper, we propose a novel feature vector by focusing on the local landscape in order to characterize the fitness landscape. The proposed landscape features are a vector form and composed of a histogram of quantized local landscape features. We introduce two implementation methods of this concept, called the bag of local landscape patterns (BoLLP) and the bag of evolvability (BoEvo). The BoLLP uses the fitness pattern of the neighbors of a certain candidate solution, and the BoEvo uses the number of better candidate solutions in the neighbors as the local landscape features. Furthermore, the hierarchical versions of the BoLLP and the BoEvo, concatenated feature vectors with different sample sizes, are considered to capture the landscape characteristic with various resolutions. We extract the proposed landscape feature vectors from well-known continuous optimization benchmark functions and the BBOB benchmark function set to investigate their properties; the visualization of the proposed landscape features, clustering and running time prediction experiments are conducted. Then the effectiveness of the proposed landscape features for the fitness landscape analysis is discussed based on the experimental results.     

Sol–Gel‐Derived High‐Performance Stacked Transparent Conductive Oxide Thin Films

Single‐ and multi‐layer transparent conductive oxide (TCO) thin films exhibiting high performance, good packing density and low surface/interface roughness are deposited on silica glass substrates by the sol–gel method. The crystal and microstructural properties of the TCO thin films are evaluated as an alternate to films prepared by ultra‐high vacuum deposition. Tin‐doped indium oxide (ITO) thin films produced using a two‐step drying process showed low surface roughness because of dense packing structure not only horizontal but also vertical directions. As a result, electrical conductivity, carrier concentration, carrier mobility, and optical transmittance of 2.3 × 10³ S/cm, 8 × 10²⁰ cm^?3, 18 cm²/Vs, and over 98% at 500 nm, respectively, were achieved. A multilayer ZnO/ITO stacked structure was also fabricated using the sol–gel process. Our findings suggest that solution‐based methods show promise as an alternative to existing ultra‐high vacuum methods to fabricate TCO thin films.