The Complete Loss of p53 Expression Uniquely Predicts Worse Prognosis in Colorectal Cancer

p53 immunohistochemistry is considered an accurate surrogate marker reflecting the underlying TP53 mutation status and has utility in tumor diagnostics. In the present study, 269 primary CRCs were immunohistochemically evaluated for p53 expression to assess its utility in diagnostic pathology and prognostication. p53 expression was wild-type in 59 cases (23%), overexpressed in 143 cases (55%), completely lost in 50 cases (19%), and cytoplasmic in 10 cases (4%). p53 immunoreactivity was associated with tumor size (p = 0.0056), mucus production (p = 0.0015), and mismatch repair (MMR) system status (p < 0.0001). Furthermore, among CRCs with wild-type p53 expression, a significantly higher number of cases had decreased CDX2 than those with p53 overexpression (p = 0.012) or complete p53 loss (p = 0.043). In contrast, among CRCs with p53 overexpression, there were significantly fewer ALCAM-positive cases than p53 wild-type cases (p = 0.0045). However, no significant association was detected between p53 immunoreactivity and the “stem-like” immunophenotype defined by CDX2 downregulation and ALCAM-positivity. Multivariate Cox hazards regression analysis identified tubular-forming histology (hazard ratio [HR] = 0.17, p < 0.0001), younger age (HR = 0.52, p = 0.021), and female sex (HR = 0.55, p = 0.046) as potential favorable factors. The analysis also revealed complete p53 loss (HR = 2.16, p = 0.0087), incomplete resection (HR = 2.65, p = 0.0068), and peritoneal metastasis (HR = 5.32, p < 0.0001) as potential independent risk factors for patients with CRC. The sub-cohort survival analyses classified according to chemotherapy after surgery revealed that CRC patients with wild-type p53 expression tended to have better survival than those with overexpression or complete loss after chemotherapy. Thus, immunohistochemistry for p53 could be used for the prognostication and chemotherapy target selection of patients with CRC.     

Oxidation kinetics for <Emphasis Type="Italic">cis</Emphasis>-9,<Emphasis Type="Italic">trans</Emphasis>-11 and <Emphasis Type="Italic">trans</Emphasis>-10,<Emphasis Type="Italic">cis</Emphasis>-12 isomers of CLA

The autoxidation processes of the cis-9,trans-11 (c9,t11) and trans-10,cis-12 (t10,c12) isomers of CLA were separately observed at ca. 0% RH and different temperatures. The t10,c12 CLA oxidized faster than the c9,t11 isomer at all tested temperatures. The first half of the oxidation process of t10,c12 CLA obeyed an autocatalytic-type rate expression, but the latter half followed first-order kinetics. On the other hand, the entire oxidation process of c9,t11 CLA could be expressed by the autocatalytic-type rate expression. The apparent activation energies and frequency factors for the autoxidation of the isomers were estimated from the rate constants obtained at various temperatures based on the Arrhenius equation. The apparent activation energies for the CLA isomers were greater than those for the nonconjugated n−6 and n−3 PUFA or their esters. However, the enthalpyentropy compensation held during the autoxidation of both the CLA and PUFA. This suggested that the autoxidation mechanisms for the CLA and PUFA were essentially the same.     

Regiospecific analysis by ethanolysis of oil with immobilized <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase

A mixture of oil/ethanol (1∶3, w/w) was shaken at 30°C with 4% immobilized Candida antarctica lipase by weight of the reaction mixture. The reaction regiospecifically converted FA at the 1- and 3-positions to FA ethyl esters, and the lipase acted on C₁₄−C₂₄ FA to a similar degree. The content of 2-MAG reached a maximum after 4 h; the content was 28–29 mol% based on the total amount of FA in the reaction mixture at 59–69% ethanolysis. Only 2-MAG were present in the reaction mixture during the first 4 h, and 1(3)-MAG were detected after 7 h. After removal of ethanol from the 4-h reaction mixture by evaporation, 2-MAG were fractionated by silica gel column chromatography. The contents of FA in the 2-MAG obtained by ethanolysis of several oils coincided well with FA compositions at the 2-position, which was analyzed by Grignard degradation. It was shown that ethanolysis of oil with C. antarctica lipase can be applied to analysis of FA composition at the 2-position in TAG.     

Size-dependent mechanical behavior of nanoscale polymer particles through coarse-grained molecular dynamics simulation

Anisotropic conductive adhesives (ACAs) are promising materials used for producing ultra-thin liquid-crystal displays. Because the mechanical response of polymer particles can have a significant impact in the performance of ACAs, understanding of this apparent size effect is of fundamental importance in the electronics industry. The objective of this research is to use a coarse-grained molecular dynamics model to verify and gain physical insight into the observed size dependence effect in polymer particles. In agreement with experimental studies, the results of this study clearly indicate that there is a strong size effect in spherical polymer particles with diameters approaching the nanometer length scale. The results of the simulations also clearly indicate that the source for the increases in modulus is the increase in relative surface energy for decreasing particle sizes. Finally, the actual contact conditions at the surface of the polymer nanoparticles are shown to be similar to those predicted using Hertz and perfectly plastic contact theory. As ACA thicknesses are reduced in response to reductions in polymer particle size, it is expected that the overall compressive stiffness of the ACA will increase, thus influencing the manufacturing process.     

Space charge behavior in polymer film based on increment of capacitance under AC high field

Polymer materials have excellent dielectric and insulation properties; however, those properties in AC high field region have not been known well. Recently we established an evaluation method of high‐field AC dissipation current waveform of polymer materials 1 . AC dissipation current waveforms of polyethylene and polypropylene films show nonlinear distortion in AC high‐field region. This nonlinearity was thought to be related to the behavior of AC space charge formation in the sample near electrodes. The properties of space charge formed under AC high field at power frequency seem to differ from those formed under DC high field. The measurement of AC space charge distribution is not so easy due to the resolution limit of the space charge measurement. We studied the dielectric properties of biaxially oriented polypropylene (BOPP) film under AC high field up to 120 °C. It was found that tan δ, AC dissipation current (Ixr), and unbalanced component of capacitive current (ΔIxc) increased when the temperature became higher. In particular, ΔIxc increased above some threshold field and was considered to be due to the AC space charge formation. This AC space charge layer near electrode is thought to be formed due to carrier injection under AC high‐field application. Usually, the carrier mobility becomes smaller on lowering the temperature. Most of the carriers injected from the electrode are trapped near the electrode in the sample film. But in the high‐temperature region, the carrier mobility becomes larger and the carrier injection starts to increase from lower field. Many more carriers are injected from the electrode. It is thought that some of the injected carriers are trapped inside the sample film; the others go through the sample to the opposite side. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(2): 8–16, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10018     

Tan δ of ethylene-propylene rubber in cryogenic temperature region–effects of additives and sample thickness

The authors have been developing extruded polymer insulated superconducting power cables. Dielectric loss in electrical insulation cannot be ignored in superconducting cables since conductor loss in the cables is minimal. Studies so far show that ethylene-propylene rubber (EPR) is suitable as an electrical insulating material in the extruded polymer insulated superconducting cable design because it demonstrates excellent mechanical and relatively good electrical qualities at a cryogenic temperature. Widely used EPR includes some kinds of additives; however, their effect on tan δ of EPR at cryogenic temperature remains unknown. The effect of additives such as crosslinking agent and fillers on tan δ of EPR was examined at temperatures of between 4.2 K and 300 K. Thickness dependence of tan δ was also measured using EPR films of different thickness and an extruded EPR insulated cable sample. The results show that additives increase tan δ of relatively thin films of EPR even in the cryogenic temperature region; however, they do not have an intolerable dielectric loss in comparison with conductor loss and heat inflow of the superconducting cable. The remedy to tan δ increase due to the polymer contraction relative to shielding wires has been established.     

The study of metal ion release and cytotoxicity in Co–Cr–Mo and Ti–Al–V alloy in total knee prosthesis – scanning electron microscopic observation

We surgically retrieved two cobalt(Co)–chromium(Cr)–molybdenum(Mo) and five titanium(Ti)–aluminum(Al)–vanadium(V) alloy knee prostheses from patients because of mechanical failure and pain. We examined the distribution of the small particles which were released from the Co–Cr–Mo and Ti–Al–V alloys using a backscattered scanning electron microscopy (SEM). In addition we analyzed the metals in the artificial knee joints and the tissues adjacent to them using energy dispersive X-ray spectroscopy (EDS). We demonstrated that a myriad of fine particles, produced by the abrasion of both Co–Cr–Mo and Ti–Al–V alloys, accumulated in the synovial cells. As Co–Cr–Mo alloys disintegrate easily in the cells, Co dissolves from the peripheral areas of them, although Cr remains within the cells. In contrast Ti–Al–V alloys are very stable in the synovial cells. From these findings we conclude that the Co–Cr–Mo alloys are hazardous to the body as the alloys release Co which enters the body. In contrast the Ti–Al–V alloys are very stable and are patently safer. Artificial joints, however, are still in considerable need of improvement.     

Establishment of a simple method for measurement of chronic blood flow in uterine artery of pregnant cows

Blood flow to the gravid uterine horn of seven multiparous Holstein cows (mean +/- SD, BW = 625.5 +/- 82.4 kg; age = 4.7 +/- 1.7 yr; parity = 2.9 +/- 1.1 yr) was measured from d 225 of gestation to parturition using transit-time ultrasonic blood flow probes placed around the middle uterine artery. Surgery was conducted on d 215 of gestation. The cows were sedated with xylazine and local anesthesia (procaine or bupivacain hydrochloride) during surgery. The surgical operations were conducted at the flank of standing cows. A transit time ultrasonic flow probe ("S" series, diameter 12 or 14 mm, Transonic Systems Inc., Ithaca, NY) was fitted surgically around the uterine artery of each cow. Surgery was completed within 2 h of anesthesia, and the animals recovered rapidly following surgery. Uterine blood flow (UBF, L/min) was recorded at 10-s intervals for 1395 min; these values were averaged to determine UBF. Cows exhibited normal gestation lengths (279.1 +/- 7.4 d), gave birth to normal healthy calves (birth weight = 40.6 +/- 6.6 kg), and had no retained placentas. The UBF increased significantly (P < 0.01) from d 225 (6.67 +/- 2.47) to d 249 (8.23 +/- 2.89) of gestation, but the latter UBF was similar to that of d 266 (8.38 +/- 2.70). The increased UBF after d 225 indicates increased demand of nutrients of fetus with the progress of gestation. The range of mean UBF varied widely among individual cows from 4.1 L/min to 12.2 L/min. Our method is useful for chronic measurement of UBF in cows for nutritional or physiological studies and does not require sophisticated facilities or special surgical technique.     

Novel Structures for Porous Silicon Light-Emitting Diodes

In this paper, two novel structures of porous silicon (PS) light-emitting diodes (LEDs) are proposed aiming at the reduction of series resistance, R_s. The basic idea of the novel structures is to suppress the excessive growth of nanoporous silicon (nano-PS) layer that is electroluminescence- (EL-) active but highly resistive. The initial wafer of the first structure consists of a lightly-doped layer stacked on a highly-doped substrate. As a consequence of anodization, nano-PS layer is formed only in the lightly-doped layer, while meso-PS layer with moderate resistivity is formed in the highly-doped substrate. The second structure consists of alternately stacked nano- and meso-PS layers, since it is expected that multiple thin nano-PS layers connected in series are less resistive than a single thick nano-PS layer. Preliminary experimental results proved the effectiveness of these novel structures on the reduction of R_s.