Effect of heating temperature on dielectric properties of Pb(Zr,Ti)O3 [PZT] fibers

Ferroelectric Pb(Zr_0.53Ti_0.47)O₃ fibers were reproducibly fabricated by sol-gel technique using triethanolamine (TEA) complexed alkoxide. The phase transition from pyrochlore to perovskite took place about 400°C and a stable single perovskite phase was obtained at 550°C. PZT gel fibers spun through nozzle were heat-treated at 700°C, and at 1000°C for 1 h to certify the effect of heat-treatment temperature on the electrical properties. The PZT fibers had elliptical cross sections with diameter of 72 m–92 m, and dense microstructure was obtained by heating at 1000°C. In the PZT fibers heat-treated at 1000°C, a distinguishable relative permittivity peak and a pyroelectric current peak were observed at their Curie temperature. The P-E hysteresis loops of the crystalline PZT fibers were also observed.     

Modulated single-longitudinal mode semiconductor laser and fiber transmission characteristics at 1.55 µm

A laser light injection technique was studied to realize a semiconductor laser transmitter oscillating in a 1.55 μm single-longitudinal mode. When -15 dBm optical power was injected into the directly modulated laser, no dispersion degradation was observed in the error rate characteristics after transmitting through 44.3 km single-mode fibers at 100 Mbits/s. Effective gain coefficientg-alpha, measured by the light injection method, was 45 cm^-1near threshold. As this gain was sufficiently saturated at the -15 dBm injection power, undesired longitudinal modes in the modulated laser were suppressed.     

Effect of cavity length on 1.55 ?m buried-heterostructure DH laser characteristics

Various parameters in 1.55 ?m buried-heterostructure DH laser design are obtained by simple analytical approximations and the effect of cavity length on laser characteristics. Threshold current density is found to vary strongly (3?10 kA/cm2) with cavity length when cleaved short enough. Interference in far-field patterns is shown to depend on cavity length.     

Remote field eddy current testing for steam generator inspection of fast reactor

We confirmed the defect detection performances of the remote field eddy current testing (RFECT) in order to inspect the helical-coil-type double wall tube steam generator (DWTSG) with the wire mesh layer for the new small fast reactor 4S (Super-Safe, Small and Simple). As the high sensitivity techniques, we tried to increase the direct magnetic field intensity in the vicinity of the inner wall of the tube and decrease the direct magnetic field around the central axis of the tube using the exciter coil with the flux guide made of the iron–nickel alloy. We adopted the horizontal type multiple detector coils with the flux guides arrayed circumferentially to enhance the sensitivity of the radial component. According to the experimental results, the output voltage of the detector coil in the region of indirect magnetic field increased more than 100 times by the application of the exciter and detector coils with the flux guides. Finally, we were able to detect the small hole defect of 1 mm in diameter and 20% of the outer tube thickness in depth over the wire mesh layer by the adoption of the exciter coil and horizontal type multiple detector coils with the flux guides. We also confirmed that the RFECT probe is useful for detecting thinning defects. These experimental results indicated that there is the possibility that we can inspect the double wall tube with the wire mesh layer using the RFECT.     

Secondary neutral and ionized particle measurements under MeV-energy ion bombardment

We have measured both secondary neutral and ionized particles from an InSb target under 3.0 MeV Si ion bombardment. Measurements of both ions and neutrals have not been carried out so far in the MeV-energy range. The mass spectra and axial emission energy distributions of secondary particles were investigated. Secondary ions were measured with a linear- and a reflective-type time-of-flight technique, whereas secondary neutral particles were photo-ionized by a UV pulsed laser (ArF: 193 nm) and measured with a reflective-type time-of-flight technique. Different results were obtained for neutral particles in comparison with ionized particles. The mean energy of neutral Sb atoms was much lower than that of neutral In atoms, whereas the mean energies of secondary In and Sb ions were nearly equal.     

Small PWRs using coated particle fuel for district heating, PFPWR50

It has been said that nuclear energy is an important option for especially developing countries to satisfy their increasing energy demand. However, it will be difficult to deploy first of a kind nuclear power plant in developing countries because extensive safety demonstration has to be conducted in industrialized countries. On the other hand, it will be essential to present rigid proof of reliable operational experience to develop proper understanding of the safety features of new reactor systems among the people around the demonstration plant sites. One of the ways to solve the issue is to integrate existing technologies supported by a great deal of data and experience into a new reactor design. Based on the consideration, a small-sized district heating reactor system based on the pressurized water reactor (PWR) technologies combined with the fuel concept of high temperature gas cooled reactors (HTGRs) has been studied. The purpose of the combination of these two existing concepts is to take the best advantages of both excellent operational experience of PWRs and the integrity of HTGR fuel, coated particle fuel, against fission products release even at high temperature. We expect that this approach will help create a breakthrough to the current stagnation of nuclear power deployment.     

Finite-element formalism for nonlinear slab-guided waves

A unified computer-aided numerical approach, based on the finite-element method, is developed for analyzing optical waves guided by dielectric slab waveguiding structures with arbitrary nonlinear media. In the formulations, both TE and TM polarizations are considered. For the TM case, the biaxial nature of nonlinear refractive index is considered without any approximation. Numerical results are presented for nonlinear TE and TM waves propagating in symmetric slab waveguides. The dependence of dispersion relations on the refractive-index profile of the film is examined     

Axisymmetric deformation of circular elastic-plastic tubes under axial tension and internal pressure

The axisymmetric bifurcation and post-bifurcation behaviour of circular tubes subjected to the combined action of axial tension and internal pressure are investigated numerically using the finite element method. It is assumed that the tubes are made of elastic-plastic strain hardening material with a smooth yield surface and that they deform without shear stress at both ends under the proportional stress path based on the stress values averaged over the cross-section.The bifurcation point and associated mode shape are obtained for each stress path. The initial to medium nonuniform deformation was studied for several specific stress paths and the growth of necking of the tube wall and swelling of the middle plane due to bifurcation are clarified.     

Development of local-scale high-resolution atmospheric dispersion model using large-eddy simulation. Part 3: turbulent flow and plume dispersion in building arrays

We have developed a LOcal-scale High-resolution atmospheric DIspersion Model using Large-Eddy Simulation (LOHDIM-LES) to assess the safety at nuclear facilities and to respond to emergencies against accidental or intentional release of radioactive materials (e.g., a terrorist attack in an urban area). In Part 1, the unsteady behavior of a plume over a flat terrain was successfully simulated. In Part 2, a new scheme to generate a spatially developing turbulent boundary layer flow was proposed. Then, the large-eddy simulation (LES) model for turbulent flow and plume dispersion around an isolated building was validated. In this study, we extend the LES model to turbulent flows and plume dispersion in various building arrays that represent typical urban surface geometries. Concerning the characteristics of flow and dispersion in building arrays, the flow patterns associated with obstacle densities and the distribution patterns of mean and root-mean-square (r.m.s.) concentrations agree well with those of the wind tunnel experiments. It is shown that the LES model successfully simulates the unsteady behaviors of turbulent flows and plume dispersion in urban-type surface geometries.     

Effects of alloying elements (Sn,Nb, Cr,and Mo) on the microstructure and mechanical properties of zirconium alloys

The alloying effects of Sn, Nb, Cr, and Mo on zirconium alloys were elucidated and compared. Electron backscatter diffraction, transmission electron microscopy, tensile test, and fractographic observation were jointly utilized to carry out detailed microstructural characterization and mechanical property evaluation. Results show that Mo is the most effective among these elements from the viewpoints of strengthening and reducing grain size. The strengthening mechanism for each element is also discussed. The order of solid-solution strengthening of these alloying elements is Cr > Nb > Sn, and the sequence is Cr ≈ Mo > Nb when precipitation strengthening is considered. Further, as far as the ability to impede dislocation motion is concerned, the sequence is Mo > Cr > Nb > Sn. The experimental results demonstrate that minor amount of Mo addition in zirconium alloys is greatly effective in strengthening the alloy and reducing the grain size.