Stability of free convection with uniform suction or injection from a vertical flat plate subjected to a constant wall heat flux

Summary A theoretical study is presented for the stability characteristics of the laminar free convection boundary layer flow along a vertical porous (permeable) flat plate subjected to a constant heat flux. The disturbance equations are solved numerically on the basis of the linear stability theory for a wide range of values of the modified Grashof number,G, and some values of the suction or injection parameterX when the Prandtl number, Pr, is 0.73 (air). These solutions indicate the important role of the parametersG andX on the flow and heat transfer characteristics. It is found that the present results are in very good agreement with those from the open literature.     

Stability of Skutterudite Thermoelectric Materials

By multifilling with La, Ba, Ga, Ti, Yb, Ca, Al, and In, the dimensionless figure of merit ZT of filled skutterudites has been improved in this work. ZT reached 0.75 for p-type (La,Ba,Ga,Ti) _x (Fe,Co)₄Sb₁₂ (x = 0.8 to 1.0) and 1.0 for n-type (Yb,Ca,Al,Ga,In) _y (Co,Fe)₄Sb₁₂ (y = 0.7 to 0.9). After annealing at 873 K for 180 h, 300 h, 710 h, 1000 h, and 5000 h in vacuum, the Seebeck coefficient S and the electrical resistivity ρ of the samples increased while the thermal conductivity λ decreased with increasing annealing time. As a result, the ZT values of both p- and n-type skutterudites remained unchanged or were slightly improved, demonstrating the excellent thermal stability of these skutterudites.     

The calcium-iodine cycle for the thermochemical decomposition of water

A new four-step thermochemical cycle based on calcium and iodine is proposed for the decomposition of water. The chemical reactions comprising the cycle are: the redox reaction of iodine with calcium hydroxide; the thermal decomposition of calcium iodate; the hydrolysis of calcium iodide; and the thermal decomposition of hydrogen iodide. Experimental verification of each of these reactions and an evaluation of the thermal efficiency of the process based on the material and energy balances for a proposed flow sheet are also presented.     

锂离子电池负极材料Sn-SnOx/C复合体的制备及充放电性能

用炭热还原方法制备了Sn-SnOx/Carbon 复合材料,二氧化锡(SnO2)和羧甲基纤维素钠(CMCNa)的混合物在450℃炭化作用下同时生成了炭和SnSnO2纳米颗粒.应用XRD、SEM/EDS、BET和电化学方法对获得的复合材料进行了表征和性能研究.SEM观测结果证明Sn-SnO2纳米颗粒很好地分散在生成的炭复...     

Zinc oxide-coated plasmonic chip modified with a bispecific antibody for sensitive detection of a fluorescent labeled-antigen

A plasmonic biosensor chip of silver-coated PMMA grating with a zinc oxide (ZnO) overlayer is fabricated for surface plasmon field-enhanced fluorescence (SPF) detection of Cy5-labeled green fluorescent protein (GFP). A bispecific antibody (anti-GFP x anti-ZnO antibody) prepared in our lab is densely immobilized on the sensor chip for GFP detection. The sensitivity of the plasmonic biosensors is improved due to densely packed antibodies and ZnO-coating that suppresses nonspecific protein adsorption and fluorescent quenching. With the ZnO-coated plasmonic chip, Cy5-labeled GFP of 10 pM can be detected through SPF. This sensitivity is 100 higher compared with the normal fluorescent detection on a ZnO-coated glass slide.     

Compensation algorithm for the phase-shift error of polarization-based parallel two-step phase-shifting digital holography

We propose an algorithm for compensating the phase-shift error of polarization-based parallel two-step phase-shifting digital holography, which is a technique for recording a spatial two-step phase-shifted hologram. Although a polarization-based system of the technique has been experimentally demonstrated, there had been the problem that the phase difference of two phase-shifted holograms had been changed by the extinction ratio of the micropolarizer array attached to the image sensor used in the system. To improve the performance of the system, we established and formulated an algorithm for compensating the phase-shift error. Accurate spatial phase-shifting interferometry in the system can be conducted by the algorithm regardless of phase-shift error due to the extinction ratio. By the numerical simulation, the proposed algorithm was capable of reducing the root mean square errors of the reconstructed image by 1/4 and 1/5 in amplitude and phase, respectively. Also, the algorithm was experimentally demonstrated, and the experimental results showed that the system employing the proposed algorithm suppressed the conjugate image, which slightly appeared in the image reconstructed by the system not employing the algorithm, even when the extinction ratio was 10:1. Thus, the effectiveness of the proposed algorithm was numerically and experimentally verified.     

Lithium Phenolate Complexes with a Pyridine‐Containing Polymer for Solution‐Processable Electron Injection Layers in PLEDs

A series of (vinylphenyl)pyridine‐based polymer binders, PVPh2Py, PVPh3Py, and PVPh4Py, are designed and synthesized and it is found that mixtures of Liq and the polymers exhibit superior electron injection characteristics as ultrathin (1.6 nm) electron injection layer (EIL) films. They are comparable to those of EILs composed only of Liq. The addition of the polymers does not deteriorate the performance of Liq EILs. Additionally, when the EIL thickness is increased from 1.6 nm to 16 nm, the driving voltages increase and the external quantum efficiencies decrease. The increase in the voltage and decrease in the EQE are suppressed in the device with mixed EILs compared to those observed for the device composed of 100 wt% Liq. Furthermore, the position of the nitrogen in the pyridine ring is considered to influence the electron transport properties of the EILs. The mixing PVPh4Py with Liq improves the driving voltage of the fabricated devices, even with a thick mixed EIL. This reduced dependence of the performance of EILs on their thickness will be advantageous for the coating of large areas using solution processes.     

Theranostic Agent Combining Fullerene Nanocrystals and Gold Nanoparticles for Photoacoustic Imaging and Photothermal Therapy

Developing photoactivatable theranostic platforms with integrated functionalities of biocompatibility, targeting, imaging contrast, and therapy is a promising approach for cancer diagnosis and therapy. Here, we report a theranostic agent based on a hybrid nanoparticle comprising fullerene nanocrystals and gold nanoparticles (FGNPs) for photoacoustic imaging and photothermal therapy. Compared to gold nanoparticles and fullerene crystals, FGNPs exhibited stronger photoacoustic signals and photothermal heating characteristics by irradiating light with an optimal wavelength. Our studies demonstrated that FGNPs could kill cancer cells due to their photothermal heating characteristics in vitro. Moreover, FGNPs that are accumulated in tumor tissue via the enhanced permeation and retention effect can visualize tumor tissue due to their photoacoustic signal in tumor xenograft model mice. The theranostic agent with FGNPs shows promise for cancer therapy.     

Out‐of‐Plane Strain Induced in a Moiré Superstructure of Monolayer MoS2 and MoSe2 on Au(111)

Making contact of transition metal dichalcogenides (TMDCs) with a metal surface is essential for fabricating and designing electronic devices and catalytic systems. It also generates strain in the TMDCs that plays significant role in both electronic and phonon structures. Therefore, detailed understanding of mechanism of the strain generation is important to fully comprehend the modulation effect for the electronic and phonon properties. Here, MoS₂ and MoSe₂ monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out‐of‐plane strain in both MoS₂ and MoSe₂ layers, whereas no strain generation is observed on polycrystalline Au or SiO₂/Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the S? Mo? S (Se? Mo? Se) structure and Au atoms via unique moiré superstructure formation for MoS₂ and MoSe₂ layers on Au(111). This observation indicates that the specific adsorption sites give rise to out‐of‐plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS₂ or MoSe₂ layer.     

Second harmonic generation of pseudo mode-locked multi ten milliwatt picosecond Ti:sapphire laser

We report the single-pass second harmonic generation (SHG) of the picosecond Ti:sapphire laser with a periodically poled lithium niobate (PPLN) waveguide. We demonstrate a conversion efficiency of 37% for the 9-mW fundamental input power at 820 nm. This laser source can provide three types of pulsed modes such as picosecond, nanosecond, and contiuous wave, by adjusting the power of the pumping source. We compare the conversion efficiency in each mode, and clearly show that SHG efficiency depends on the pulsewidth, that is, the peak power of the laser source. As the temperature of the PPLN rises, the fundamental wavelength for phase-matching becomes longer. We indicate that the rate is about 0.06 nm/K.