Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Adsorption of urea,creatinine, and uric acid from three solution types using spherical activated carbon and its recyclability

In this paper, we propose that the urinary toxins from the wastewater be adsorbed on an adsorbent such as spherical activated carbon and the latter be regenerated by subjecting it to high temperatures to recycle activated carbon and also to recycle the water used in dialysis. We studied the adsorption of artificial waste dialysate, which is a mixed solution of urea, creatinine, and uric acid, and the separate solutions for each of these and found that their extents of adsorption onto the spherical activated carbon material were nearly identical. The amount of adsorption was approximately 1.4 mg·g^-1 for urea, 18 mg·g^-1 for creatinine, and 20 mg·g^-1 for uric acid. The urea, creatinine, and uric acid adsorbed onto the spherical activated carbon decomposed on heat treatment at 500℃, and the adsorption capacity of the spherical activated carbon was regenerated. Our study successfully demonstrated that the spherical activated carbon can be recycled in the waste dialysate treatment process.     

Identification of Tumor Suppressive Genes Regulated by miR-31-5p and miR-31-3p in Head and Neck Squamous Cell Carcinoma

We identified the microRNA (miRNA) expression signature of head and neck squamous cell carcinoma (HNSCC) tissues by RNA sequencing, in which 168 miRNAs were significantly upregulated, including both strands of the miR-31 duplex (miR-31-5p and miR-31-3p). The aims of this study were to identify networks of tumor suppressor genes regulated by miR-31-5p and miR-31-3p in HNSCC cells. Our functional assays showed that inhibition of miR-31-5p and miR-31-3p attenuated cancer cell malignant phenotypes (cell proliferation, migration, and invasion), suggesting that they had oncogenic potential in HNSCC cells. Our in silico analysis revealed 146 genes regulated by miR-31 in HNSCC cells. Among these targets, the low expression of seven genes (miR-31-5p targets: CACNB2 and IL34; miR-31-3p targets: CGNL1, CNTN3, GAS7, HOPX, and PBX1) was closely associated with poor prognosis in HNSCC. According to multivariate Cox regression analyses, the expression levels of five of those genes (CACNB2: p = 0.0189; IL34: p = 0.0425; CGNL1: p = 0.0014; CNTN3: p = 0.0304; and GAS7: p = 0.0412) were independent prognostic factors in patients with HNSCC. Our miRNA signature and miRNA-based approach will provide new insights into the molecular pathogenesis of HNSCC.     

Catalyst Design of Pt-Modified Ni/Al2O3 Catalyst with Flat Temperature Profile in Methane Reforming with CO2 and O2

Pt(0.3)/Ni(10)/Al₂O₃, prepared by a sequential impregnation method, exhibited a more excellent performance in methane reforming with CO₂ and O₂ in terms of the catalytic activity and the temperature profile of the catalyst bed than Pt(0.3) + Ni(10)/Al₂O₃ prepared by a coimpregnation method, Ni(10)/Al₂O₃, Pt(0.3)/Al₂O₃, and Pt(10)/Al₂O₃. It is thought that this is because the surface Pt atoms on Ni catalyst can contribute to the enhancement of the catalyst reducibility.     

Incremental learning of gestures for human–robot interaction

For a robot to cohabit with people, it should be able to learn people’s nonverbal social behavior from experience. In this paper, we propose a novel machine learning method for recognizing gestures used in interaction and communication. Our method enables robots to learn gestures incrementally during human–robot interaction in an unsupervised manner. It allows the user to leave the number and types of gestures undefined prior to the learning. The proposed method (HB-SOINN) is based on a self-organizing incremental neural network and the hidden Markov model. We have added an interactive learning mechanism to HB-SOINN to prevent a single cluster from running into a failure as a result of polysemy of being assigned more than one meaning. For example, a sentence: “Keep on going left slowly” has three meanings such as, “Keep on (1)”, “going left (2)”, “slowly (3)”. We experimentally tested the clustering performance of the proposed method against data obtained from measuring gestures using a motion capture device. The results show that the classification performance of HB-SOINN exceeds that of conventional clustering approaches. In addition, we have found that the interactive learning function improves the learning performance of HB-SOINN.     

HSPF Simulation of Runoff and Sediment Loads in the Upper Changjiang River Basin, China

To evaluate the performance of a computer model simulating runoff and sediment load in the upper region of the Changjiang (Yangtze River) basin over a relatively short time interval, including examining the applicability of the input precipitation data generated from global circulation models and satellite data, we used a spatially distributed model, HSPF with the International Satellite Land Surface Climatology Project (ISLSCP) precipitation data for 1987 and 1988 as input data. The Nash–Sutcliffe coefficient (R2) for 5-day average streamflow was 0.94 in the calibration period and 0.95 in the verification period for the whole upper region. Moreover, the model simulated the 5-day average streamflow well in each main tributary, as shown by R2 values of 0.46–0.96, except that it underestimated the peak flow rates during the flood season over 2 years by up to 71% in Tuojiang and 61% in Jialingjiang. The model simulated the 5-day concentrations of suspended solids (SS) fairly well in the headwaters and upper regions of the Jinshajiang, Yalongjiang, and Minjiang watersheds, as shown by R2 values of 0.31–0.65. In the other regions, however, the model underestimated the SS load by up to 72%, and rarely simulated the fluctuation of SS concentration in each river channel during the flood season. These errors led to the underestimation of sediment runoff volume from the whole upper region during the flood season, as shown by the ratio of the simulated sediment load to the observed data at Yichang: 0.69 in the calibration period and 0.68 in the verification period. The ISLSCP precipitation tended to be more frequent and less intense than the measured precipitation. This was probably the main reason why the HSPF did not perform well in all regions at all times.     

Temperature dependence of luminescence from a silica glass under in-reactor irradiation

We have investigated in-reactor luminescence (IRL) from a silica glass at temperatures ranging from 100 K to 250 K. The IRL consists mainly of a broad emission band peaked at 2.7 eV assigned to oxygen deficient centers produced in the silica glass under the in-reactor irradiation. The 2.7 eV emission intensity linearly increased with the irradiation time and its increasing rate was larger for higher irradiation temperatures. However, this temperature dependence is inconsistent with that for the defect production rate and the cause is not clear at present. The initial intensity of the 2.7 eV IRL band increases with temperature, showing an activation energy of ca 21 meV. This value is much lower than those observed in the temperature dependence of the 2.7 eV photoluminescence (PL) and the cathodeluminescence (CL) induced by 8 keV electron irradiation. These results suggest that in IRL, some electrons excited to higher energy levels than the luminescence level are likely transferred to the luminescence state without thermal activation, resulting in a lower activation energy in their temperature dependence.     

A Technique to Eliminate Redundant Inter-Processor Communication on Parallelizing Compiler TINPAR

Optimizing inter-processor (PE) communication is crucial for parallelizing compilers for message-passing parallel machines to achieve high performance. In this paper, we propose a technique to eliminate redundant inter-PE messages. This technique utilizes data-flow analysis to find a definition point that corresponds to a use point where the definition and the use occur in different PEs. If several read accesses occurred in the same PE use the data defined at the same definition point in another PE, redundant inter-PE messages are eliminated as follows: only one inter-PE communication is performed for the earliest read access and the previously received data are used for the following read. In order to guarantee the consistency of the data, a valid flag and a sent flag are provided for each chunk of received data. The control of these flags is equivalent to the coherence control by the self invalidation on a compiler aided cache coherence scheme.     

Comparative Study on Epidermal Moisturizing Effects and Hydration Mechanisms of Rice-Derived Glucosylceramides and Ceramides

Ceramide (Cer) plays an important role in skin barrier functions in the stratum corneum (SC). The ingestion of food-derived glucosylceramides (GlcCer) attenuates transepidermal water loss (TEWL). However, the moisturizing effects of single molecules of GlcCer and Cer remain unclear. Therefore, we herein purified 13 GlcCer and 6 Cer, including elasticamide, which has the same structure as human Cer[AP], from rice and compared their epidermal moisturizing effects in a reconstructed human epidermal keratinization model. The results obtained showed that 10 µM of 5 GlcCer[d18:2] with a 4E,8Z sphingadienine and C18 to C26 fatty acids and 10 µg/mL of 3 Cer with C23 or C24 fatty acids significantly reduced TEWL. The moisturizing effects of these GlcCer were dependent on the length of fatty acids. Furthermore, 10 µg/mL of elasticamide increased the SC Cer contents by promoting the expression of GlcCer synthase. Electron microscopic observations revealed that 1 µM of GlcCer[d18:2(4E,8Z)/26:0] increased the number of keratohyalin granules and desmosomes. Immunostaining and Western blotting indicated that 1 µM of GlcCer[d18:2(4E,8Z)/26:0] up-regulated the expression of filaggrin and corneodesmosin, which contribute to epidermal hydration. This comparative study on epidermal moisturization by GlcCer and Cer isolated from rice revealed differences in their hydration mechanisms.     

Effect of Compressive Stress in Tumor Microenvironment on Malignant Tumor Spheroid Invasion Process

In this study, we proposed an in vitro tumor model to simulate the mechanical microenvironment and investigate the effect of compressive stress on the invasion process of malignant tumors. It has been pointed out that the biomechanical environment, as well as the biochemical environment, could affect the transformation of cancer cell migration, invasion, and metastasis. We hypothesized that the solid stress caused by the exclusion of surrounding tissue could transform tumor cells from noninvasive to invasive phenotypes. Colorectal cell spheroids were embedded and cultured in agarose gels of varying concentrations to simulate the earliest stages of tumor formation and invasion. The spheroids embedded in gels at higher concentrations showed peculiar growth after 72 h of culture, and the external compressive loading imposed on them caused peculiar growth even in the gels at lower concentrations. In conclusion, the mechanical microenvironment caused the transformation of tumor cell phenotypes, promoting the growth and invasion of tumor cell spheroids.