The structure of the core polyol of the ether lipids fromSulfolobus acidocaldarius

The major ether-type lipid structures ofSulfolobus acidocaldarius (ATCC33909) were composed of caldarchaeol and calditoglycerocaldarchaeol. However, the characterization by nuclear magnetic resonance spectroscopy and mass spectrometry showed that the structure of calditol in calditoglycerocaldarchaeol is not nonitol, 2-(1′,2′,3′-trihydroxypropyl)1,2,3,4,5,6-hexahydroxyhexane, but 2-hydroxymethyl-1-(2,3-dihydroxypropoxy),2,3,4,5-cyclopentanetetraol with an ether linkage in the molecule. Such an intermolecular ether linkage was resistant, to BCl₃ treatment, but nonresistant to 57% HI degradation treatment conducted at 100°C for 60 h, producting 2-hydroxymethyl-1,2,3,4,5-cyclopentanepentaol from calditol as reaction product. Further, it was confirmed that the structure of calditol is essentially a derivative of glycerol, and hydrocarbon chains were conjugated to the glycerol-like site in the structure. The calditol with an ether linkage in the molecule suggested an important role regarding the properties of heat-resistance and acid-resistance observed inSulfolobales. Presented at the international workshop on “Molecular Biology and Biotechnology of Extremophiles and Archaebacteria,” Wako, Japan, August 1993.     

Hole Doping Mechanism in Bismuth Cuprates

The role of oxygen for the hole doping has been investigated for single-phased (Bi,Pb)₂Sr₂Ca₂Cu₃O. _z Defects introduced by oxygen have been clarified to be interstitial atoms by pycnometric density measurements. The c axis decreases and the modulation periods along the b axis also decrease with increasing oxygen content in the crystal. It is likely that extra oxygen ions exist between the BiO double layers and those oxygen ions are responsible for the modulation. Samples with oxygen content ranging from 9.99 to 10.18 showed superconductivity. The critical temperature T _c , exhibited a maximum value (109 K) at 10.07 oxygen atoms in the formula unit, which coincided with the average Cu valence of 2.13. The data indicated that hole formation was governed by oxygenation reaction in this system.     

A comparative study of the emotional assessment of automotive exterior colors in Asia

This article compares color assessments of automotive exteriors at four locations in China, Thailand and Japan. This study employed painted panels of twelve colors, thirty sensory words and fifteen pairs of emotion variables. It also used reference figures of nine cars that included four styling categories, namely sedans, compacts, sport utility vehicles and sports cars. The results of like-dislike tests revealed that basic automotive exterior colors, such as black, white and red, were highly preferred across locations. However, geographical differences are apparent in the preference for some non-basic colors. To elucidate these geographical differences, a Chi-square test and principal component analysis were performed on the data on emotion variables. The results revealed both similarities and differences in color preferences among the four locations. Color preferences were similar in Hong Kong and Shanghai when simply evaluated by color samples. However, similar preferences for automotive exterior colors were observed in Hong Kong, Kyoto and Bangkok, but not in Shanghai. These results suggest that there is fluctuation in the emotion evoked by a color when the color is considered in the context of automotive exteriors. Therefore, this study indicates that automotive sales can be secured in the global marketplace by creating a single palette of exterior colors based on similar color preferences across countries. However, these results also indicate that preparing market-specific automotive-color line-ups can be an effective marketing strategy.     

Preparation and electrooptical properties of liquid crystal dispersed film by electron-beam irradiation

Polymer films consisting of nematic liquid crystal (LC) droplets and polymer networks were prepared by using a low-energy electron beam to irradiate a homogeneous mixture of nematic LC and bifunctional methacrylate monomer. Influences of such polymerization conditions as polymerization temperature, monomer concentration, and radiation energy on electrooptical properties of the compound films were examined. The polymer yield, affecting to a large extent the film properties, depended on the monomer concentration and the radiation energy. Compound films, which have a switching function from the scattering state to transparency by applying approximately 20–30 V between the two sides of the film, were obtained. In addition, it was found that a compound film with excellent electrooptical properties was prepared by changing impure LC in the droplets into pure LC. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1675–1681, 1997     

Mechanical properties of interpenetrating polymer network hydrogels based on hybrid ionically and covalently crosslinked networks

Hydrogels are polymer networks swollen in water. Because of their soft and wet nature, and their ability to show large volume changes, hydrogels can be useful in many biomedical and actuator applications. In these applications, it is crucial to tune the mechanical and physical properties of a hydrogel in a controllable manner. Here, interpenetrating polymer networks (IPNs) made of a covalently crosslinked network and an ionically crosslinked network were produced to investigate the effective parameters that control the physical and mechanical properties of an IPN hydrogel. Covalently crosslinked polyacrylamide (PAAm) or poly(acrylic acid) (PAA) networks were produced in the presence of alginate (Alg) that was then ionically crosslinked to produce the IPN hydrogels. The effect of ionic crosslinking, degree of covalent crosslinking, AAm : Alg and AA : Alg ratio on the swelling ratio, tensile properties, indentation modulus, and fracture energy of IPN hydrogels was studied. A hollow cylindrical hydrogel with gradient mechanical properties along its length was developed based on the obtained results. The middle section of this hydrogel was designed as a pH triggered artificial muscle, while each end was formulated to be harder, tougher, and insensitive to pH so as to function as a tendon‐like material securing the gel muscle to its mechanical supports. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2504–2513, 2013     

Resolution of Epoxydienes by Reversed-Phase Chiral HPLC and its Application to Stereochemistry Assignment of Mulberry Looper Sex Pheromone

Resolution of insect pheromonal cis-epoxydiene racemates derived from (Z,Z,Z)-3,6,9-trienes was examined with a reversed-phase chiral HPLC column. The results showed that a Chiralcel OJ-R column was suitable for separating the enantiomers having a C₁₇–C₂₃ unsaturated straight chain except for 9,10-epoxydienes with a C₂₁–C₂₃ chain. To determine the absolute configuration of the separated enantiomers, each of the optically active epoxydienes was hydrogenated over Pd-BaSO₄ and its behavior was examined on this chiral column by cochromatography with the corresponding chiral epoxy compound having a saturated chain, which was prepared via a Sharpless epoxidation reaction. This analysis showed that the dextrorotatory C₁₇–C₂₃ 3,4- and 6,7-epoxydienes and C₁₇–C₂₀ 9,10-epoxydienes with shorter R _ts possess (3S,4R)-, (6S,7R)-, and (9R,10S) configurations, respectively, and the levorotatory enantiomers with longer R _ts possess the opposite configuration. An abdominal tip extract of the mulberry looper, Hemerophila artilineata Butler (Lepidoptera: Geometridae: Ennominae), included (9S,10R)-(Z,Z)-cis-9,10-epoxy-3,6-octadecadiene as a main sex pheromone component. The synthetic (9S,10R)-9,10-epoxydiene, rather than its antipode, elicited strong antennal and behavioral responses from the male moths in electrophysiological and field tests.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.     

Fundamental Behavior of Direct-Coupled Submicrosecond Pulse Energization in Electrostatic Precipitators

The fundamental characteristics of the direct-coupled pulse energization in electrostatic precipitators (EP's) are investigated in a test rig comprised of a coal pulverizing facility, a furnace, a gas cooling system, and an EP. The EP consisted of a corona electrode with barbed wires and a collection electrode with 300-mm duct spacing. This simulates the type of EP normally used in a coal-fired power station. The pulse-energized collection field shows a very high collection performance of more than 99 percent collection efficiency and the performance enhancement compared to the conventional dc energization, causing very severe back corona, becomes as large as H = 2.50.H is the enhancement factor in terms of the Deutsch migration velocity in the case of the very high resistivity dust of rd = 2 x 1013 ?cm at the gas temperature of Tg = 150°C. Even at the lower level of the dust resistivity at Tg = 110°C, where no back corona occurs in the dc-energized collection field, the performance enhancement is as large as H = 1.21. The mechanism of such great performance enhancement is likely to be the result of the very uniform and very intense formation of corona plasmas on the wires as a result of the very fast rise in the pulse voltage applied and a special sawtooth waveform of the operating voltage between the corona and collection electrodes.     

Molecular dynamics simulation of 〈<Emphasis Type="Bold">c</Emphasis>+<Emphasis Type="Bold">a</Emphasis>〉 dislocation core structure in hexagonal-close-packed metals

The core structures of 〈c+a〉 dislocations in hexagonal-close-packed (hcp) metals have been investigated by molecular dynamics (MD) simulation using a Lennard-Jones-type pair potential. The 〈c + a〉 edge dislocation has two types of core at 0 K; one is a perfect dislocation (type A), and the other has two 1/2 〈c+a〉 partials (type B). Type A transforms to type B by abruptly increasing temperature from 0 K to 293 K, while type B is stable in temperature range from 0 K to 293 K. In contrast, type A extends parallel to (0001) at 30 K, and this extended core is still stable at 293 K. These results suggest that the 〈c+a〉 edge dislocation glides on the {11 2} as two 1/2 〈c+a〉 partial dislocations and becomes sessile due to changes of the core structure. The 〈c+a〉 screw dislocation spreads over two {10 1} planes at 0 K. The core transforms into a unsymmetrical structure at 293 K, which is spread over {11 2} and {10 1}, and core spreading occurs parallel to {11 2} at 1000 K. A critical strain to move screw dislocations depends on the sense of shear strain. The dependence of the yield stress on the shear direction can be explained in terms of these core structures. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Simultaneous three-dimensional step-height measurement and high-resolution tomographic imaging with a spectral interferometric microscope

A noncontact, nonmechanical scanning, wide-field spectral interference microscope is developed for simultaneous measurement of three-dimensional step-height of discontinuous objects and tomographic imaging. A superluminescent diode (SLD) is used as a broadband light source and a liquid-crystal Fabry-Perot interferometer (LC-FPI) as a frequency-scanning device. By means of changing the injection current to the SLD, the spectral profile of the SLD is equalized, and a constant light input to the interferometer is achieved over the entire frequency-scan range. The Fourier-transform technique is used to determine both the amplitude and the phase of spectral fringe signals. Three-dimensional height distribution of a discontinuous object is obtained from the phase information, whereas optically sectioned images of the object are obtained either from the amplitude information alone or from the combination of both the amplitude and phase information. Experimental results with submicrometer resolution are presented for both step-height measurement and tomographic sectioning.