Expression of epidermal growth factors and epidermal growth factor receptor in normal cycling human ovaries

Immunolocalization of transforming growth factor-alpha (TGF alpha), epidermal growth factor (EGF), cripto-1, amphiregulin and epidermal growth factor receptor (EGFR) was studied in 51 premenopausal human ovaries at various phases of the menstrual cycle. Localization of mRNA for TGF alpha and EGF was also studied by in-situ hybridization. Immunoreactive TGF alpha was observed predominantly in theca cells in 12 of 33 antral follicles in the follicular phase (6/14 dominant follicles, and 6/19 non-dominant) but not in any of the 18 follicles in the luteal phase or in primordial and pre-antral follicles. TGF alpha immunoreactivity was present predominantly in the luteinized granulosa cells in 13 of 15 corpora lutea in the luteal phase, which are considered to be active in steroidogenesis, but not in any of the regressed corpora lutea. Accumulation of TGF alpha mRNA hybridization signal was observed only in the theca cells in the follicles and luteinized theca cells in the ovaries that were immunohistochemically positive for TGF alpha. EGFR immunoreactivity was detected in 24 of 33 antral follicles in the follicular phase and in two of 18 follicles in the luteal phase but not in any of the corpora lutea. Immunoreactive EGF, cripto-1 and amphiregulin or EGF mRNA was not detected in any follicles, corpora lutea, or the stroma cells examined. These results indicate that, of the epidermal growth factors examined in this study, TGF alpha is locally synthesized in normal cycling human ovaries and TGF alpha may be synthesized in theca cells and act on the granulosa cells in a paracrine fashion through the EGFR in ovarian follicles.     

Effect of silicate incorporation on in vivo responses of α-tricalcium phosphate ceramics

In addition to calcium phosphate-based ceramics, glass-based materials have been utilized as bone substitutes, and silicate in these materials has been suggested to contribute to their ability to stimulate bone repair. In this study, a silicate-containing α-tricalcium phosphate (α-TCP) ceramic was prepared using a wet chemical process. Porous granules composed of silicate-containing α-TCP, for which the starting composition had a molar ratio of 0.05 for Si/(P + Si), and silicate-free α-TCP were prepared and evaluated in vivo. When implanted into bone defects that were created in rat femurs, α-TCP ceramics either with or without silicate were biodegraded, generating a hybrid tissue composed of residual ceramic granules and newly formed bone, which had a tissue architecture similar to physiological trabecular structures, and aided regeneration of the bone defects. Supplementation with silicate significantly promoted osteogenesis and delayed biodegradation of α-TCP. These results suggest that silicate-containing α-TCP is advantageous for initial skeletal fixation and wound regeneration in bone repair.     

Comparative Study of Interfacial and Biological Properties in <Emphasis Type="SmallCaps">d</Emphasis>-Glycerate-Derived Surfactants

The effects of hydrophobic chain length on the interfacial and biological properties of diacyl d ‐glyceric acid (d ‐GA) sodium salts were evaluated based on interfacial tension analyses, dynamic light scattering (DLS), and antitrypsin activity. Of the four synthesized d ‐GA‐derived surfactants [dihexanoyl d ‐GA sodium salt (diC6GA‐Na), dioctanoyl d ‐GA sodium salt (diC8GA‐Na), didecanoyl d ‐GA sodium salt (diC10GA‐Na), and dilauroyl d ‐GA sodium salt (diC12GA‐Na)], only those with C6, C8, and C10 acyl chains were investigated because diC12GA‐Na were insoluble at room temperature. Together with our previous results, surface tensions at the critical micelle concentration (CMC) were 33.9 mN/m for diC6GA‐Na, 25.5 mN/m for diC8GA‐Na, and 27.9 mN/m for diC10GA‐Na. Evaluation of assembly size via DLS and optical microscopy revealed that diC8GA‐Na and diC10GA‐Na formed large associates with average sizes ranging from 50 to 200 μm at concentrations 4–5 times greater than their CMC, whereas diC6GA‐Na did not form such associates. In tryptic hydrolysis studies using N^α‐benzoyl‐dl ‐arginine‐4‐nitroanilide as a substrate, diC8GA‐Na exhibited an inhibitory effect on trypsin (trypsin specific activity: 0.26 ± 0.045 U/mg‐protein) greater than that of diC10GA‐Na (0.39 ± 0.10 U/mg‐protein), whereas diC6GA‐Na did not show antitrypsin activity. These results show that diC8GA‐Na was the most bioactive of the evaluated diacyl d ‐glycerate surfactants.     

(4<Emphasis Type="Italic">Z</Emphasis>,15<Emphasis Type="Italic">Z</Emphasis>)-Octadecadienoic Acid Inhibits Glycogen Synthase Kinase-3β and Glucose Production in H4IIE Cells

Many uncommon non-methylene-interrupted fatty acids (NMI FA) are present in limpet gonads, but their biological properties remain unknown. To investigate new biological effects of naturally occurring NMI FA in eukaryotic cells, the biological activities of structurally analogous (4Z,15Z)-octadecadienoic acid (1), (9Z,20Z)-tricosadienoic acid (2), and (12Z,23Z)-hexacosadienoic acid (3) were examined by using a yeast-based drug-screening system using the Ca²⁺-sensitive mutant strain, Saccharomyces cerevisiae (zds1Δ erg3Δ pdr1Δ pdr3Δ). Among 1–3, 1 showed restored growth activity at a dose of 80 µg/disc in the mutant yeast strain. This phenotype suggests that 1 suppresses Ca²⁺-signaling of the mutant yeast through inhibition of glycogen synthase kinase-3β (GSK-3β) or calcineurin pathways or both. From this result, the inhibitory activity of 1–3 against GSK-3β was further determined. 1–3 showed potent inhibitory activity against GSK-3β with IC₅₀ values ranging from 8.7 to 21.9 µM. Inhibition of GSK-3β reduces gene expression of the gluconeogenic key enzymes in liver, so we analyzed glucose production in rat hepatoma H4IIE cells to assess GSK-3β inhibitory activity of 1–3. Acid 1 inhibited glucose production at 25 µM in H4IIE cells. Our results would open up new possibilities for an anti-diabetic effect of 1 and might provide important insights into understanding the biological properties of naturally occurring NMI FA.     

A new microcellular foam injection‐molding technology using non‐supercritical fluid physical blowing agents

A new foam injection‐molding technology was developed to produce microcellular foams without using supercritical fluid (SCF) pump units. In this technology, physical blowing agents (PBA), such as nitrogen (N₂) and carbon dioxide (CO₂), do not need to be brought to their SCF state. PBAs are delivered directly from their gas cylinders into the molten polymer through an injector valve, which can be controlled by a specially designed screw configuration and operation sequence. The excess PBA is discharged from the molten polymer through a venting vessel. Alternatively, additional PBA is introduced through the venting vessel when the polymer is not saturated with PBA. The amount of gas delivered into the molten polymer is controlled by the gas dosing time of the injector valve, the secondary reducing pressure of the gas cylinder and the outlet (back) pressure of the venting vessel. Microcellular polypropylene foams were prepared using the developed foam injection‐molding technology with 2–6 MPa CO₂ or 2–8 MPa N₂. High expansion foams with an average cell size of less than 25 μm were prepared. The developed technology dispels arguments for the necessity to pressurize N₂ or CO₂ to the SCF to prepare microcellular foams. POLYM. ENG. SCI., 57:105–113, 2017. © 2016 Society of Plastics Engineers     

Shape optimization of continua using NURBS as basis functions

The present paper introduces a numerical solution to shape optimization problems of domains in which boundary value problems of partial differential equations are defined. In the present paper, the finite element method using NURBS as basis functions in the Galerkin method is applied to solve the boundary value problems and to solve a reshaping problem generated by the H1 gradient method for shape optimization, which has been developed as a general solution to shape optimization problems. Numerical examples of linear elastic continua illustrate that this solution works as well as using the conventional finite element method.     

Antiwear Properties of Phosphorous-Containing Compounds in Vegetable Oils

Antiwear properties of vegetable oils were investigated under boundary lubrication conditions using the four-ball wear test (ADTM D 4172). Additive-free vegetable oils exhibit similar antiwear properties, which are superior to those of additive-free mineral oils. Phosphorus-containing compounds such as zinc bis(dialkyldithiophosphate) and dialkyl phosphonates improve the antiwear properties of vegetable oils. The effect of the additives on wear reduction was found to depend on the peroxide value of the base oil. It is considered that peroxides decompose the antiwear additives to less active forms. The formation of peroxides by the autooxidation of vegetable oils was observed even at room temperature. Sunflower oil exhibits good oxidation stability, which may promise success in various applications.     

Visualizing the Adenylation Activities and Protein–Protein Interactions of Aryl Acid Adenylating Enzymes

Structural and activity studies have revealed the dynamic and transient actions of carrier protein (CP) activity in primary and secondary metabolic pathways. CP-mediated interactions play a central role in nonribosomal peptide biosynthesis, as they serve as covalent tethers for amino acid and aryl acid substrates and enable the growth of peptide intermediates. Strategies are therefore required to study protein–protein interactions efficiently. Herein, we describe activity-based probes used to demonstrate the protein–protein interactions between aryl CP (ArCP) and aryl acid adenylation (A) domains as well as the substrate specificities of the aryl acid A domains. If coupled with in-gel fluorescence imaging, this strategy allows visualization of the protein–protein interactions required to recognize and transfer the substrate to the partner ArCP. This technique has potential for the analysis of protein–protein interactions within these biosynthetic enzymes at the molecular level and for use in the combinatorial biosynthesis of new nonribosomal peptides.     

Simulated microgravity triggers characteristic morphology and stress response in Saccharomyces cerevisiae

Reduction of gravity results in changes in gene expression and morphology in the budding yeast Saccharomyces cerevisiae. We studied the genes responsible for the morphological changes induced by simulated microgravity (SMG) using the yeast morphology data. We comprehensively captured the features of the morphological changes in yeast cells cultured in SMG with CalMorph, a high-throughput image-processing system. Statistical analysis revealed that 95 of 501 morphological traits were significantly affected, which included changes in bud direction, the ratio of daughter to mother cell size, the random daughter cell shape, the large mother cell size, bright nuclei in the M phase, and the decrease in angle between two nuclei. We identified downregulated genes that impacted the morphological changes in conditions of SMG by focusing on each of the morphological features individually. Gene Ontology (GO)-enrichment analysis indicated that morphological changes under conditions of SMG were caused by cooperative downregulation of 103 genes annotated to six GO terms, which included cytoplasmic ribonucleoprotein granule, RNA elongation, mitotic cell cycle phase transition, nucleocytoplasmic transport, protein–DNA complex subunit organization, and RNA localization. P-body formation was also promoted under conditions of SMG. These results suggest that cooperative downregulation of multiple genes occurs in conditions of SMG.     

Influence of texture feature size on spherical silicon solar cells

The effects of surface texturing on spherical silicon solar cells were investigated. Surface texturing for spherical Si solar cells was prepared by immersing p-type spherical Si crystals in KOH solution with stirring. Two kinds of texture feature sizes (1 and 5μm pyramids) were prepared by changing stirring speed. After fabrication through our baseline processes, these cells were evaluated by solar cell performance and external quantum efficiency. The cell with 1 and 5μm pyramids shows the short circuit current density ( Jsc ) value of 31.9 and 33.2 mA·cm-2 , which is 9% and 13% relative increase compared to the cell without texturing. Furthermore, the cell with 5 μm pyramids has a higher open-circuit voltage (0.589 V) than the cell with 1 μm pyramids (0.577 V). As a result, the conversion efficiency was improved from 11.4% for the cell without texturing to 12.1% for the cell with 5 μm pyramids.