A comparison of the grade of laryngeal visualisation;--the McCoy compared with the Macintosh and the Miller blade in adults

Effectiveness in visualization of the vocal cord during orotracheal intubation with McCoy (McC) compared with Macintosh (Min) and Miller (Mil) blades were investigated. After an institutional review board approval, 117 patients for elective surgery under general anesthesia requiring tracheal intubation were investigated. Five board certified anesthesiologists tried to visualize the vocal cord of a patient three times with the three different types of laryngoscope. Total of 351 intubation attempts were studied. The view obtained at laryngoscopy with each of the three blades was recorded as follows. Grade 1. If most of the glottis is visible. Grade 2. If only the posterior extremity of the glottis is visible. Grade 3. If no part of the glottis can be seen. Grade 4. If not even the epiglottis can be exposed. Eight-two Grade 1 views were obtained with McC, 72 with Mil and 47 with Min, respectively. Thirty-three Grade 2 views were obtained with McC, 36 with Min and 24 with Mil. Two Grade 3 views with McC, 34 with Min and 14 with Mil were obtained. Seven Grade 4 views were obtained with Mil. The grades of laryngeal visualization with McC were significantly lower than those with Min and Mil.     

Pseudo-binary system Bi2O3-TeO2 in air

The phase equilibria in the pseudo-binary system Bi₂O₃-TeO₂ at 600° 950° C in air were examined by solid-state reaction techniques and X-ray powder diffraction method. Four pseudo-binary compounds appeared, i.e., -Bi₂O₃ type solid solution having a compositional range of (1-x)Bi₂O₃·xTeO₂ wherex=0 0.4 a new compound Bi₆Te₂O₁₅ which has an orthorhombic cell of a=2.27(4) nm, b=1.06(1) nm and c = 0.539(8) nm, 2Bi₂O₃ · 3TeO₂, and an unidentified phase Bi₂O₃·2TeO₂. The formation of the phase Bi₆Te₂O₁₅, in which all the Te ions are hexavalent, was confirmed by the thermogravimetry and by the Mössbauer spectra. The liquidus curves for whole system were determined by DTA method.     

Trap Levels in Eu-Doped SrAl2O4 Phosphor Crystals Co-Doped with Rare-Earth Elements

SrAl₂O₄:Eu²⁺ phosphor crystals co-doped with auxiliary activators such as La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, or Y have been grown by the floating zone (FZ) technique. Photoluminescence spectrum (PL), time-resolved PL, and thermally stimulated luminescence (TSL) are evaluated to clarify the long-duration phosphorescence mechanism of SrAl₂O₄, Eu, and Ln phosphors. TSL spectra were measured in the temperature range from RT to 600 K to evaluate the depth and densities of the traps generated by the doping of auxiliary activators that are responsible for the long-duration phosphorescence. The peak wavelength of PL does not vary with auxiliary activator elements, while decay curves vary greatly with the auxiliary activators. The trap depth and the densities of the trapped carriers estimated based on the hole trap model also vary with the auxiliary activator elements. The traps generated at around E =0.5 eV by the auxiliary activators, Nd, Dy, and Tm, with sufficient densities are effective for the long-duration phosphorescence.     

Role of Acetic Acid Added to the Reaction Media for the Enantio-differentiating Hydrogenation of Methyl Acetoacetate Over a Tartaric Acid-modified Nickel Catalyst

The role of acetic acid added to the reaction media for the enantio-differentiating hydrogenation of methyl acetoacetate over a (R,R)-tartaric acid-in-situ-modified nickel catalyst was studied from the viewpoint of the hydrogenation rate during repeated runs. The hydrogenation of methyl acetoacetate on the “enantio-differentiating sites” of a tartaric acid-modified nickel catalyst was specifically accelerated by the acetic acid added to the reaction media to increase the enantio-differentiating ability of the catalyst. In order to increase the enantio-differentiating ability, the addition of acetic acid to the reaction media was required in each run during the repeated use of the catalyst.     

Humidity sensor composed of a microporous film of polyethylene-graft-poly-(2-acrylamido-2-methylpropane sulfonate)

Summary Inside a microporous polyethylene film, 2-acrylamido-2-methylpropane sulfonic acid was graft polymerized by ultraviolet irradiation. A humidity sensor was fabricated by depositing gold electrodes on both sides of the grafted film. The impedance was measured as a function of humidity for the acid and alkali salts of sulfonate. The sensor has long term stability and is resistant to water.     

Concentration of acetic acid in sulfite pulp evaporation drain by reverse osmosis

The evaporation drain of sulfite pulp spent liquor contains few volatile fatty acids, most of which is acetic acid. The main objective of this study is to recover acetic acid as the concentrated solution (about 4%), which could be used as a culture medium of the yeast. As acetic acid can easily pass through the cellulose acetate membrane, SP drains neutralized by NaOH, NH₄OH and Ca(OH)₂ were used as the feed solutions. In all cases, concentration by reverse osmosis was successfully carried out provided the appropriate pretreatment was employed. The recovery of acetic acid was 95.6, 90.5 and 98.2% for Na-, NH₄-, and Ca-drain, respectively. In addition, the recovered (permeated) water may be used as an industrial one.     

Effect of perchloric acid on the molecular weight and yield of poly-THF

Polytetramethylene glycol (molecular weight range 1000–8000) was prepared by the polymerization of tetrahydrofuran (THF) using a binary catalyst system of fuming sulfuric acid and perchloric acid. When 28% fuming sulfuric acid alone was used as the catalyst, the average molecular weight of polymer was low, the maximum value being 1000–1100. By the combination of fuming sulfuric acid with a small amount of perchloric acid, the average molecular weight of the polymer was increased to about 8000. Furthermore, the molecular weight was readily controlled in the range of 1000 to 8000 by varying the amount of the binary catalyst.     

Crack-wake shielding and small-scale crack-tip yielding as potential mechanisms for improving the delayed-failure resistance of silicon nitride at elevated temperatures

Requirements and microstructural design criteria for employing silicon nitride in long-term structural applications at elevated temperatures are discussed according to fracture mechanics concepts. Three least engineering parameters are considered: lifetime, flaw-tolerance and deformation under stress. “Ductile” materials are found by exploitation of small-scale crack-tip yielding which arises from the softening of their grain-boundary phase. These materials, however, are likely to exhibit poor deformation resistance. Materials with a “strong” grain boundary generally show a superior deformation behaviour but are liable to brittle fracture and static-fatigue strength degradation unless shielding mechanisms in the crack-wake be operative. The present analysis evaluates and compares these two classes of materials and the respective approaches commonly followed for their densification.     

Motion optimization using state-dispersion-based phase space partitions

This paper addresses a phase space partitioning problem in motion planning systems. A class of kinematic and dynamic motion planning systems, including rapid semioptimal motion-planning (RASMO), uses partitions for phase spaces in cumulative optimization criteria. In these systems, a partition results in a uniquely planned motion with a quality that is determined by a selected optimization criterion. In this paper, state-dispersion-based phase space partitioning (SDPP) that generates adaptive partitions is proposed. These partitions allow the motion planning systems to plan better motions. Uniform partitions and adaptively fixed partitions of SDPP are compared under several conditions using RASMO and a double inverted pendulum model while setting the optimality criterion of RASMO to time. The results reveal that RASMO with SDPP plans smaller time motions than those obtained with RASMO using uniform partitions.