Study of Non-lubricated Wear of the Al–Si Alloy Composite Reinforced with Different Ratios of Coarse and Fine Size Zircon Sand Particles at Different Ambient Temperatures

In the present work, a detailed study of ceramic reinforcement of different size ranges in the matrix of LM13 alloy on the friction and wear behavior has been carried out. For this purpose, LM13/Zr composite containing 10 wt% zircon sand particles of different size ranges using stir casting process has been developed. Zircon sand particles were incorporated in two ways: firstly as single size reinforcement and secondly dual size reinforcement. Durability of the composites was tested by finding the wear rate of the composite against the steel disk by pin-on-disk method. Addition of zircon sand particles in the LM13 alloy improves the hardness of the composite as well as wear resistance. Wear rate of the developed composites was tested under different test conditions by varying the applied load and ambient temperatures. Wear rate of the composite changes significantly at different ambient temperatures. SEM analysis of the worn surfaces was done to know the operative wear mechanism.     

A figure of merit for evaluating sustainability of renewable energy systems

For grading different types of renewable energy based electricity generation systems, a figure of merit has been proposed and evaluated. The figure of merit has been obtained by analyzing total energy utilization in constructing and installing the systems and by their respective electricity generation. The gross carbon emission has also been estimated for evaluation of figure of merit. This figure of merit clearly indicates that wind power is the most sustainable source for electricity generation, followed by small hydropower and solar photovoltaics.     

Corrosion inhibition behaviour of thiourea derivatives in acid media against mild steel deterioration: An overview

This paper summarizes the inhibitor activity of various reported thiourea derivatives in acid media used against the deterioration of mild steel. Acid solutions have been extensively employed in manufacturing and many industrial processes for pickling and removal of undesirable scale. Mild steel is highly susceptible to corrosion in such aggressive acid media. The additives such as inhibitors are widely employed in those cases to reduce the extent of corrosion as much as possible. The survey of literature on organic inhibitors clearly indicates the potential usage of thiourea derivatives as inhibitors of mild steel corrosion. The influence of physical-chemical properties on the inhibition activity of thiourea derivatives has been discussed. This information is highly useful for different industrial applications where good performing inhibitors are being required for protecting mild steel from aggressive acid media.     

Evaluation of leanness using fuzzy association rules mining

The modern manufacturing organizations are adopting lean manufacturing principles so as to eliminate wastes and streamline their processes. The evaluation of leanness gains vital importance. Multiple tools/techniques are available for ensuring leanness. Due to the impreciseness and vagueness associated with decision-making problems, fuzzy logic need to be used. Relational databases enable decision-making process. This article presents a study in which fuzzy association rules mining approach has been used for leanness evaluation of an Indian modular switches manufacturing organization. The experiences gained as a result of the conduct of the study indicated that leanness evaluation could be performed by the decision makers without any constraints.     

Thermal performance and embodied energy analysis of a passive house – Case study of vault roof mud-house in India

This paper investigates thermal performance of an existing eco-friendly and low embodied energy vault roof passive house (or mud-house) located at Solar Energy Park of IIT Delhi, New Delhi (India). Based on embodied energy analysis, the energy payback time for the mud-house was determined as 18 years. The embodied energy per unit floor area of R.C.C. building (3702.3 MJ/m²) is quiet high as compared to the mud-house (2298.8 MJ/m²). The mud-house has three rooms with inverted U-shape roof and remaining three rooms with dome shape roof. A thermal model of the house consisting of six interconnected rooms was developed based on energy balance equations which were solved by using fourth order Runge Kutta numerical method. The predicted six room air temperatures were found in good agreement with the experimental observed data on hourly basis in each month for one year. The annual heating and cooling energy saving potential of the mud-house was determined as 1481 kW h/year and 1813 kW h/year respectively for New Delhi composite climate. The total mitigation of CO₂ emissions due to both heating and cooling energy saving potential was determined as 5.2 metric tons/year. The annual carbon credit potential of mud-house was determined as € 52/year. Similar results were obtained for the different climatic locations in India.     

Phase Evolution,Magnetic, Optical,and Dielectric Properties of Zr‐Substituted Bi0.9Gd0.1FeO3 Multiferroics

Polycrystalline BiFeO₃ (BFO) and Bi_0.90Gd_0.10Fe_1?xZr_xO₃ (x = 0.0–0.10; BGFZ_x) ceramics were synthesized by solid‐state reaction method. Rietveld analysis of X‐ray diffraction patterns showed that BFO and BGFZ_x = 0.0 samples are stabilized in rhombohedral structure (space group R3c), whereas a small fraction of orthorhombic phase (space group Pn2₁a) is observed for BGFZ_{x = 0.03–0.10} samples. Suppression and disappearance of some Raman modes indicated a structural phase transition with addition of Zr dopant at Fe site. Magnetic measurements exhibited weak ferromagnetic behavior of BGFZ_x samples with increasing Zr⁺⁴ concentrations. The insertion of Gd⁺³ ions at Bi⁺³ sites and nonmagnetic Zr⁺⁴ ions at Fe⁺³ sites in Fe–O–Fe network suppressed the spin cycloid structure of BFO which in turn enhanced the magnetization of these ceramics. Electron spin resonance spectra revealed the breaking of spin cycloid of BFO due to the development of free spins with addition of Zr⁺⁴ dopants at Fe sites. UV–Visible diffuse reflectance spectra showed one d–d crystal field transition and two charge‐transfer (C–T) transitions along with a sharp absorption of light in visible region for all samples. Almost frequency‐independent dielectric constant and dielectric loss along with very low values of dielectric loss indicated greatly improved dielectric properties for BGFZ_{x = 0.03–0.10} samples.