OpenSim: open-source software to create and analyze dynamic simulations of movement

Dynamic simulations of movement allow one to study neuromuscular coordination, analyze athletic performance, and estimate internal loading of the musculoskeletal system. Simulations can also be used to identify the sources of pathological movement and establish a scientific basis for treatment planning. We have developed a freely available, open-source software system (OpenSim) that lets users develop models of musculoskeletal structures and create dynamic simulations of a wide variety of movements. We are using this system to simulate the dynamics of individuals with pathological gait and to explore the biomechanical effects of treatments. OpenSim provides a platform on which the biomechanics community can build a library of simulations that can be exchanged, tested, analyzed, and improved through a multi-institutional collaboration. Developing software that enables a concerted effort from many investigators poses technical and sociological challenges. Meeting those challenges will accelerate the discovery of principles that govern movement control and improve treatments for individuals with movement pathologies.     

Effect of balconies on ventilation inducing aeromotive force on low-rise buildings

Data on mean wind pressure distribution on opposite walls of a five storey building model with smooth surface and also with balconies mounted thereon have been presented, and the effect of balconies on ventilation inducing wind forces has been discussed. It is shown that provision of balconies alters wind pressure distribution on windward wall but does not introduce significant change in it on the leeward side. Ventilative force across openings located centrally on opposite walls also remains almost unchanged due to the balconies. However, the ventilative forces across windows located at different heights on the windward wall only, get diminished at all the floors near the upstream end for obliquely incident wind, and over the entire wall width at the intermediate floors for the wind incidence at 90 ° angle on the wall. Enhancement in the ventilation inducing wind forces is caused at the top floors on the downstream side for obliquely incident wind, and near the ends of the wall at the ground and top floors for the wind impinging at right angle on the wall.     

Effect of Gd doping on magnetic, electric and dielectric properties of MgGdxFe2−xO4 ferrites processed by solid state reaction technique

MgGd_xFe_2−xO₄ (x = 0.0, 0.05, 0.1 and 0.15) ferrites, with improved dc resistivity, initial permeability, saturation magnetization, and extremely low relative loss factor, have been synthesized by solid state reaction technique. The microstructures, electric, dielectric and magnetic properties have been investigated by means of X-ray diffraction, Keithley 2611 system, impedance analyzer and VSM respectively. The addition of Gadolinium in Mg ferrite has been shown to play a crucial role in enhancing the electric, dielectric and magnetic properties. The dc resistivity is increased by two orders of magnitude as compared to Mg ferrite. Saturation magnetization has been increased by two times and remnant magnetization has been increased by more than three times due to the doping of Gd³⁺ ions in Mg ferrite. The relative loss factor was found to have very low values and is of the order of 10⁻⁴-10⁻⁵ in the frequency range 0.1-30 MHz. The variations of electric, dielectric and magnetic properties of the samples have been studied as a function of frequency and Gd³⁺ ions concentration measured at room temperature. High resistivity and improved magnetic properties can be correlated with better compositional stoichiometry and the replacement of Fe³⁺ ions by Gd³⁺ ions. The mechanisms responsible to these results have been discussed in this paper.     

Preparation of Nanosized Rutile TiO2 from an Aqueous Peroxotitanate Solution

A new facile method for direct preparation of well-crystallized rutile TiO₂ nanoparticles without any ionic impurities was reported. The nanosized TiO₂ was prepared by aging a peroxotitanate solution at 100°C for 0–12 h, formed by reaction of H₂O₂ and titanium tetraisopropoxide (TTIP). The method involves hydrolysis of TTIP and simultaneous digestion of hydrolyzed precipitates, and hydrothermal treatment into crystalline phases. It was found that the TTIP/H₂O₂ molar ratio in the preparation of peroxotitanate as a precursor for TiO₂ was crucial in the formation of a rutile phase. Transmission electron microscope observation for sols showed rod-like shapes with average particle sizes of around 100 nm in the elongated direction.     

Investigation on gradient dielectric characteristics of bamboo (Dendrocalamus strictus)

Dielectric constant (ε′) and tan δ dependence on distance from the outer most skin to the center of bamboo has been determined. Dielectric measurements have been done in the temperature range from 24 to 120°C and in the frequency range from 4 to 100 kHz. Gradient behavior in dielectric constant (ε′) and tan δ has been found in bamboo. It has also been observed that the dielectric constant (ε′) and tan δ increase with the increasing temperature and decrease with the increasing frequency. Relaxation times have been calculated for the four samples at 80, 90, and 100°C temperatures, which show that relaxation time decreases with the increase of temperature due to the increased molecular mobility. A continuous increase in the hardness from the center 48 to the outer surface 70 and density from 0.45 to 0.80 g/cc has been observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3489–3494, 2006     

Microwave ECR plasma CVD of cubic Y2O3 coatings and their characterization

Yttrium oxide (Y₂O₃) thin films are deposited by microwave electron cyclotron resonance (ECR) plasma assisted metal organic chemical vapour deposition (MOCVD) process at a substrate temperature of 350 °C using indigenously developed metal organic precursors (2,2,6,6-tetra methyl-3,5-heptane dionate) yttrium, commonly known as Y(thd)₃ synthesized by ultrasound method. The deposited coatings are characterized by X-ray photoelectron spectroscopy, glancing angle X-ray diffraction, scanning electron microscopy, EDS and infrared spectroscopy. The characterization results indicate that it is possible to deposit non-porous coatings with excellent uniformity of a single phase cubic Y₂O₃ on various substrates by this process at reasonably low substrate temperature that is desirable in various manufacturing processes.     

The Role of Water in Air-jet Texturing (A Critical Review)

This paper presents a brief summary of the results of the role of water in air-jet texturing from a number of authors. The explanations of the results put forward by the authors have been reviewed and some have been analysed.