高精度二相混合式步进电机控制系统研究

在二相混合式步进电机数学模型的基础上,针对电机低速运行时的振动和噪声过大的问题,研究了正弦脉宽调制细分驱动技术,开发出一种新型的基于单片机的多细分二相混合式步进电机驱动器。该系统主要分为数字控制部分、GAL片逻辑综合信号处理单元、SG3525恒流控制电路、驱动功放电路、过流保护及反馈电路和系统供电电源模块等。系统采用专用集成芯片和可编程逻辑器件,以8位单片机AT89C2051为控制核心,实现恒流控制、正/反转运行、过流保护和多档位细分等功能。实验结果表明,系统硬件和软件设计合理可行,各项技术指标均达到了设计要求。     

基于ADS的脉冲压缩雷达系统仿真与性能分析

在高级设计系统ADS仿真平台上,开发了一套具有良好通用性和灵活性的脉冲压缩雷达系统模型库,为今后开发大规模雷达系统模型库和进行复杂雷达系统仿真打下了基础;在此工作基础上,以巴克码脉冲压缩信号为例,建立了相应的雷达系统模型,并结合系统性能分析的需求,在该系统仿真设计过程中引入蒙特.卡罗模型,较全面地得到了系统基本性能指标值;由这些指标值可以看出,该巴克码脉冲压缩雷达系统性能良好;仿真结果与理论值和真实系统值相符,从而正确地完成了系统的方案论证和性能评估。     

FTPA: Supporting Fault-Tolerant Parallel Computing through Parallel Recomputing

As the size of large-scale computer systems increases, their mean-time-between-failures are becoming significantly shorter than the execution time of many current scientific applications. To complete the execution of scientific applications, they must tolerate hardware failures. Conventional rollback-recovery protocols redo the computation of the crashed process since the last checkpoint on a single processor. As a result, the recovery time of all protocols is no less than the time between the last checkpoint and the crash. In this paper, we propose a new application-level fault-tolerant approach for parallel applications called the Fault-Tolerant Parallel Algorithm (FTPA), which provides fast self-recovery. When fail-stop failures occur and are detected, all surviving processes recompute the workload of failed processes in parallel. FTPA, however, requires the user to be involved in fault tolerance. In order to ease the FTPA implementation, we developed Get it Fault-Tolerant (GiFT), a source-to-source precompiler tool to automate the FTPA implementation. We evaluate the performance of FTPA with parallel matrix multiplication and five kernels of NAS Parallel Benchmarks on a cluster system with 1,024 CPUs. The experimental results show that the performance of FTPA is better than the performance of the traditional checkpointing approach.     

Output feedback control for uncertain linear systems with faulty actuators based on a switching method

This paper investigates the problem of output feedback stabilization for a class of uncertain linear systems with faulty actuators via the synergy with a switching strategy. When actuators suffer a ‘destabilizing failure’ and the never‐faulty actuators cannot stabilize the given system, the closed‐loop exponential stability can still be achieved via the average dwell‐time scheme employing an arbitrary switching signal. The prerequisite condition found requires the ratio between the two lapse times, when the system is devoid of faulty actuators and when it is not so, to be less than a certain specified constant. Then the stabilizing output feedback controls are designed via the technique of linear matrix inequalities. The illustrative example and the respective simulation results demonstrate the feasibility and effectiveness of the proposed design synthesis. Copyright © 2008 John Wiley & Sons, Ltd.     

A study of roll‐printing technology for TFT‐LCD fabrication

Abstract— Recently, potential breakthrough technologies for low‐cost processing of TFT‐LCDs and new process developments for flexible‐display fabrication have been widely studied. A roll‐printing process using etch‐resist material as a replacement for photolithographic patterning was investigated. The characterization of the properties of patterns formed in roll printing, a method to fabricate cliché plates for fine patterns, and the design of a new formulation for resist printing ink is reported. The pattern position accuracy, which is one of the most important issues for the successful application of printing processes in display manufacturing was studied and how it can be improved by optimizing the blanket roll structure is explained. New design rules for the layout of the thin‐film‐transistor array was derived to improve the compatibility of roll printing. As a result, a prototype 15‐in.‐XGA TFT‐LCD panel was fabricated by using printing processes to replace all the photolithographic patterning steps conventionally used.     

Ambient‐light sensor system with wide dynamic range enhanced by adaptive sensitivity control

Abstract— A new digital ambient‐light sensor system is presented which employs two linear light sensors with different sensitivities and automatically adjusts the sensitivity based on the illumination condition. The adaptation mechanism allows a very wide range of light intensity to be detected, and the input dynamic range of the system is substantially improved from 22.5 to 45.1 dB. The proposed method does not require any additional precision bits for output data. Due to the small number of the output bits and the simple conversion process, the system can be easily integrated on the display panel.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Digital‐to‐analog converter with gamma correction on glass substrate for TFT‐panel applications

Abstract— Low‐temperature polysilicon (LTPS) technology has a tendency towards integrating all circuits on glass substrate. However, the poly‐Si TFTs suffered poor uniformity with large variations in the device characteristics due to a narrow laser process window for producing large‐grained poly‐Si TFTs. The device variation is a serious problem for circuit realization on the LCD panel, so how to design reliable on‐panel circuits is a challenge for system‐on‐panel (SOP) applications. In this work, a 6‐bit R‐string digital‐to‐analog converter (DAC) with gamma correction on glass substrate for TFT‐panel applications is proposed. The proposed circuit, which is composed of a folded R‐string circuit, a segmented digital decoder, and reordering of the decoding circuit, has been designed and fabricated in a 3‐μm LTPS technology. The area of the new proposed DAC circuit is effectively reduced to about one‐sixth compared to that of the conventional circuit for the same LTPS process.     

Synthesis of symmetric and asymmetric singly terminated elliptic ladder filters for multiplexing applications

An extension of the Cauer ladder development for synthesizing singly terminated filters with symmetric and asymmetric responses is presented. Basically, a driving‐point immittance including reactive constant elements is carried out in such a way that provides the transmission zeros. The reactive constant elements are introduced into the synthesis for two reasons. The first is to consider the possibility of the asymmetric position of transmission zeros in the real frequency axis. The second one is to obtain canonical forms, i.e. networks with the minimum number of elements in the case of symmetrical responses. To validate the proposed method, a filter with asymmetrical response has been synthesized, comparing different topologies for its use in multiplexers. This fact is illustrated with a Ku‐band elliptic response diplexer designed in H‐plane rectangular waveguide. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

A DR algorithm based on artificial potential field method

Considering player entity’s motion regularity into DR (Dead Reckoning) algorithm can improve its prediction accuracy in MMOG (Massively Multiplayer Online Games), a novel DR algorithm was proposed to solve this problem in this paper. First the artificial potential field model of player entities is created, and then the acceleration of player entities is weighted with the acceleration produced by the potential field force and the acceleration reckoned by the traditional DR algorithm. In order to calculate the weight, Q-Learning algorithm is used. The experiments show that the method can improve prediction accuracy and reduce the network traffic.