In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

中国台湾电信市场现状

台湾电信市场的开放大致分四个阶段,从1995年起,陆续开放了移动通信、卫星通信及固定通信等多种业务。固网市场,2001年新世纪资通、台湾固网和力霸宽频电信的加入打破了中华电信的独家垄断,开始形成四强竞争的新局面。移动领域,1997年底6家运营商8张民营执照的发放开始了该领域史无前例的竞争。在2001年1月,台湾大哥大、远致电信、亚太行动宽频、联邦电信和中华电信获得了3G执照,累计竞标金额达488.99亿元(新台币)。     

A new family of yeast genes implicated in ergosterol synthesis is related to the human oxysterol binding protein

We have identified three yeast genes, KES1, HES1 and OSH1, whose products show homology to the human oxysterol binding protein (OSBP). Mutations in these genes resulted in pleiotropic sterol-related phenotypes. These include tryptophan-transport defects and nystatin resistance, shown by double and triple mutants. In addition, mutant combinations showed small but apparently cumulative reductions in membrane ergosterol levels. The three yeast genes are also functionally related as overexpression of HES1 or KES1 alleviated the tryptophan-transport defect in kes1Δ or osh1Δ mutants, respectively. Our study implicates this new yeast gene family in ergosterol synthesis and provides comparative evidence of a role for human OSBP in cholesterol synthesis.     

辐射对血液流变效应的研究及动物全身照射后全血粘度的变化规律

本文结果表明经一次大剂量全身照射后的机体血液流变的主要特性为全血表观粘度先高粘后低粘的双向性变化,从照后第一天起即升高。随着放射病病程的发展,在早期有一个高粘峰,其峰均值比照前升高47.80％。但因不同动物、不同剂量、不同均速,不同血源而变化不同。     

油脂己烷浸出工程进展

油脂己烷浸出工程经过几十年的发展，在工艺、设备、自控、节能、环保等方面都已趋于完善。装置的规模日趋大型化。车间内的工段组合更加科学、合理与多样化，浅料层浸出器，形式多样化的湿粕脱溶系统，湿粕挤压机，废水零排放系统，不同理念的负压蒸发及余热回收系统，蒸汽冷凝水的再利用，简洁实用的全电脑操作系统，分步萃取，混合油过滤，浸出车间内的混合油碱炼、水化脱胶、磷脂干燥等使得当今的油脂浸出向大型化、集约化、自动化、节能环保的方向发展，为客户提供了越来越多的选择。     

Study on the long‐term thermal‐oxidative aging behavior of polyamide 6

The long‐term thermal‐oxidative aging behavior of polyamide 6 (PA6) was studied by comparison with the stabilized sample in this work. The variation of mechanical properties of the pure and the stabilized samples of PA6 with aging time at 110°C, 130°C, and 150°C were investigated, respectively. The aging mechanism of PA6 under heat and oxygen was studied in terms of the reduced viscosity, crystallization behavior, dynamic mechanical behavior, and chemical composition through the methods of polarized light microscopy (PLM), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), X‐ray photoelectron energy spectrum (XPS), and so on. The results indicated that at the initial stage of aging, the molecular crosslinking reaction of PA6 dominated resulting in the increase of the mechanical strength, reduced viscosity, and the glass transition temperature of the sample. And the molecular degradation dominated in the subsequent aging process resulting in the decrease of the melting temperature, the increase of the crystallinity, and the formation of the oxides and peroxides products. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal stabilization effect of biphenol monoacrylate on polyamide 6

Biphenol monoacrylate (AL) was combined with a traditional hindered phenolic‐based binary antioxidant system to form a ternary stabilization system for the purpose of further improving the thermal–oxidative stability of polyamide 6 (PA6). The thermal stabilization effect of the antioxidant AL on PA6 was studied in terms of the reduced viscosity, the chemical structure, the yellow index, and the mechanical properties. The results showed that the antioxidant AL, with the proper chemical structure, could improve the thermal stability of PA6 effectively through a unique bifunctional stabilizing mechanism. The interaction of the molecules of PA6 with the antioxidant AL was investigated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008