Oxygen enrichment from air through multilayer thin low‐density polyethylene films

Several multilayer thin low‐density polyethylene (LDPE) films were fabricated by blown thin film having a thickness of 7 μm and an area of 130 cm². They were characterized for their oxygen‐enrichment performance from air by a constant pressure–variable volume method in a round permeate cell with an effective area of 73.9 cm². The relationship between oxygen‐enrichment properties, including oxygen‐enriched air (OEA) flux, oxygen concentration, permeability coefficients of OEA, oxygen, nitrogen, as well as separation factor through the multilayer LDPE films, and operating parameters, including transfilm pressure difference, retentate/permeate flux ratio, temperature, as well as layer number, are all discussed in detail. It is found that all of the preceding oxygen‐enrichment parameters increase continuously with an increase of transfilm pressure difference from 0.1 to 0.65 MPa, especially for the trilayer and tetralayer LDPE films. The oxygen concentration and separation factor appear to rapidly increase within the retentate/permeate flux ratio below 200, and then become unchangeable beyond that, whereas the OEA flux and the permeability coefficients of OEA, oxygen, and nitrogen seem to remain nearly constant within the whole retentate/permeate flux ratio investigated, especially for the monolayer and bilayer LDPE films. The selectivity becomes inferior, whereas the permeability becomes superior, as the operating temperature increases from 23 to 31°C. The highest oxygen concentration was found to be 44.8% for monolayer LDPE film in a single step with air containing oxygen of 20.9% as a feed gas and operating pressure of 0.5 MPa at a retentate/permeate flux ratio of 340 and 23°C. The results demonstrate a possibility to prepare an oxygen‐enriching membrane directly from air, based on the easily obtained thin LDPE films. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3013–3021, 2002; DOI 10.1002/app.2331     

一种利用历史数据构造虚拟标签的定位算法

在RFID定位算法中,利用接收信号强度统计模型进行直接定位的精确度不高,而利用实际参考标签定位存在信号易碰撞、外出部署不便等问题,因此提出一种基于虚拟标签的RFID定位算法VIREH以克服以上缺点.该算法利用历史数据构建虚拟参考标签,然后利用虚拟参考标签代替实际参考标签进行定位.依据VIREH算法,开发基于Android移动设备的RFID定位系统,在系统中使用VIREH算法进行定位,对定位误差进行了统计以测试算法性能.测试结果表明,VIREH算法的定位精度较直接定位有显著提高,较使用实际参考标签没有明显降低,有助于提高RFID定位精度.     

两亲性超支化聚（胺-酯）对PVC／PP共混体系的增容作用

研究了两亲性超支化聚（胺-酯）（A-HPAE）对PVC／PP共混体系的增容作用，讨论了其用量对PVC／A-HPAE／PP共混体系力学性能和复数黏度的影响。结果表明，在PVC／PP共混物中加入2份（质量份，下同）A-HPAE时，能很好地改善共混体系的相容性，使共混物的拉伸强度和断裂伸长率分别达到26．18mPa和18．72％，比未加的分别提高了107．67％和34．68％；共混体系的绝对复数黏度随着A-HPAE用量的增大而降低；扫描电子显微镜分析表明，A-HPAE增强了PVC和PP之间的界面黏结作用，减小了共混体系中分散相的尺寸。     

废弃木粉与短切玻璃纤维组合增强聚丙烯的力学性能

用废弃木粉与短切玻璃纤维作为增强材料，制得了组合增强的聚丙烯复合材料，研究了制备工艺及设备、材料配方及界面改性方法等对材料力学性能的影响。结果表明，用单螺杆挤出机制备组合增强材料，可减少对玻璃纤维的损伤，保持较长的玻璃纤维，有利于其增强作用的发挥；随着玻璃纤维含量的增加，体系的力学性能提高，而木粉含量对材料力学性能的影响与玻璃纤维的含量相关；采用硅烷偶联剂对木粉进行表面处理，在基体中添加接枝极性基团的改性聚丙烯，可改善体系的界面结合，提高力学性能。     

三羟甲基丙烷三丙烯酸酯的制备

介绍了一种制备三羟甲基丙烷三丙烯酸酯（ＴＭＰＴＡ）的方法──酰氯法。用本法可得纯度＞９９．９％、收率＞９８％的题示产物。原理简单，途径简捷，无需阻聚剂，大大简化了后处理工艺，成本降低。     

合成氨装置中高温氢腐蚀问题探讨

探讨合成氨装置中的高温氢腐蚀问题,结合实际说明高温氢腐蚀的影响因素,提出预防高温氢腐蚀的措施.     

地市级气象基础数据库的升级改造与运行维护

随着气象现代化的不断推进,气象业务体系的不段完善和发展,各种新的气象服务手段的不断涌现,地市州一级气象基础数据的需求越来越大。以德阳为例仅直接调用SQL数据库的应用就多达20种,如何保障基础气象数据库的正常运行,是目前需要解决的一个问题。我局建立了多个基础气象数据库服务器,按照应用的资源占有率合理将应用分配大各个服务器上,以保证基础气象数据数据库正常运行。本文主要以德阳市气象局为例,介绍了我局为保证气象基础数据库正常运行采取的一些措施。     

Synthesis and light‐emitting properties of new poly(p‐phenylenevinylene) derivatives containing oxadiazole moiety

Two new poly(p‐phenylenevinylene) (PPV) derivatives containing oxadiazole moiety (OXA‐PPV1 and OXA‐PPV2) were synthesized by the Wittig condensation polymerization reaction. Their thermal and light‐emitting properties were investigated. The single‐ and triple‐layer electroluminescent (EL) devices with configurations of ITO/polymer/Al and ITO/polymer/OXD‐7/Alq₃/Al were fabricated. They exhibited blue emission at 470 nm for OXA‐PPV1 and green emission at 560 nm for OXA‐PPV2. The turn‐on voltages of triple‐layer device were 11 V for OXA‐PPV1 and 8 V for OXA‐PPV2. The triple‐layer EL devices showed much better performance than did the single‐layer devices. The spectra indicated energy transfer occurred from segments of side chain to polymer backbone. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 422–428, 2002     

防止氟化铝母液脱硅工艺中铝、氟消耗方法研究

在氟化铝母液中添加氯化铝等可溶性铝盐,可有效地阻止钠,氟,铝间冰晶石固体物质的形成,从而达到防止氟化铝脱硅工艺中铝,氟的损耗,确保氟硅酸钠的产品质量,同时提高母液利用的经济效益。     

聚乙烯/粘土纳米复合材料燃烧性能研究

使用锥形量热计、热重分析仪对聚乙烯(PE)／粘土纳米复合材料的燃烧性能进行了研究。结果表明，有机改性纳米粘土对PE燃烧性能有较大影响，随眷纳米粘土合量的增加，PE的热分解速率和最大热释放速率都明显下降，这对材料应用中的火灾安全性具有重要意义。