热压变形对灰口铸铁石墨形态的影响

研究了灰口铸铁(HTl50)在900℃大压下量塑性变形后石墨的分布形态，结果表明：随着压下量的增加，石墨片逐渐趋于平行分布；变形过程中发生了碳的回溶，同时伴随着石墨片的断裂；石墨片体积分数及片间距随压下量的增加而逐渐减少。     

稀土含量对喷熔层组织及耐蚀性的影响

本文通过在镍基自熔合金粉末中加入不同含量的稀土，研究了稀土含量对喷熔层组织及耐蚀性的影响规律及其作用机制。结果表明，在喷熔材料中加入适量稀土，可使喷熔层组织细化、晶界净化，从而使腐蚀过程中的表面活性点减少，耐蚀性提高。     

提高高铬白口铸铁磨球冲击抗力的技术关键

当高铬白口铸铁含铬量为18%～28%,Cr/C值是8￣9,铸铁的显微组织是回火马氏体 少量残余奥氏体(<5%) M7C3碳化物,则磨球具有高的冲击韧性和断裂韧性K1C,具有高的冲击抗力,表现出低的冲击剥落量。     

Preparation and properties of nanosize MnZn ferrite from δ-FeOOH

Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.     

多孔β-TCP陶瓷药物载体的制备与体外释药速率的研究

本文用注浆成形的方法制备了以β-TCP为主晶相的多孔药物载体，体外测定了利福平的释药速率。实验结果表明，利福平在模拟体液中能够达到稳定的释放，可以作为骨结核手术后的辅助治疗。多孔β-TCP药物载体有望成为一种理想的药物缓释载体。     

压缩天然气(CNG)加气站工艺技术及方案选择

介绍了压缩天然气（CNG）加气站工艺技术，并着重分析了脱水、压缩、储气和安全等重点工序，还分别介绍了CNG加气子母站和CNG加气标准站平面布置图。在此基础上，根据不同CNG站的技术要求和本地区实际情况，选择CNG站建设方案。     

对甲醇精馏几个问题的认识

简述甲醇精馏三塔流程原理 ,分析了加压精馏塔及常压精馏塔物料和热量平衡关系 ,提出了操作中应注意的事项     

甲苯三氧化硫磺化反应抑制副产物二甲苯砜的研究

对SO3磺化甲苯反应的副产物二甲苯砜成因及反应历程进行了分析,通过实验比较了醋酸与二甲苯砜的抑制效果,提出用磺化副产物二甲苯砜自身抑制的新方法.考察了二甲苯砜力入量和甲苯转化率对抑制副反应的影响.反应温度:10℃,三氧化硫:6%,甲苯转化率为35%时,外加甲苯质量3.3%的二甲苯砜就能控制二甲苯砜含量不增加,且甲苯磺酸异构体的对位含量由84%上升到89%,间位含量由2.5%下降到1%.