Laser-induced fluorescence (LIF) studies of liquid-liquid flows. Part I: Flow structures and phase inversion

A non-intrusive dye tracing technique, laser-induced fluorescence (LIF), has been applied to investigate the co-current flow of two immiscible organic-aqueous liquid flows in a vertical pipe. This technique allowed detailed visualization of the dynamic evolution of the flows. Flow structures in liquid-liquid flows at high dispersed phase fraction were revealed which had not been seen before. In pipe flow, an unstable range was found in the flow pattern map in which oil-in-water (o/w) and water-in-oil (w/o) dispersions could co-exist. Secondary dispersions (o/w/o and w/o/w) were observed for most volume fractions and velocities, especially in the unstable range. It was observed that, when the flow is in the unstable region, both w/o/w and o/w/o secondary dispersions could appear in the same set of experiments. It was found that this unstable range in the pipe flow, in spite of the similar appearance, was different to the ambivalent range seen in agitated systems. The one-dimensional drift flux model of Wallis (1969) for dispersed flow and a laminar model for co-current downward annular flow, were also applied to predict the in situ oil holdup; good agreement was obtained.     

厌氧膜生物反应器在废水处理中的研究进展

厌氧膜生物反应器是一种处理高浓度有机废水的有效工艺.综述了厌氧膜生物反应器的特征,在工业废水处理中的应用以及低温下厌氧处理低浓度废水的效果,并展望了厌氧膜生物反应器的应用前景.     

高性能环氧树脂涂料的研制

以甲基丙烯酸、丙烯酸丁酯及苯乙烯的聚合为接枝体，在过氧化苯甲酰作用下对E-51环氧树脂进行接枝改性，同时对三乙烯四胺进行曼尼希改性，制得多种改性固化剂，并用其与改性的环氧树脂配制成涂料，实验结果表明，当苯酚、甲醛和三乙烯四胺的物质的量比为3：3：1时固化剂的固化性能最好。     

193nm光刻胶的研制

从主体树脂的结构设计、单体的合成工艺、主体树脂的合成工艺、光致产酸剂的评价、配方研究等多个方面论述了193nm光刻胶的研制工艺，合成出了多种适用的单体及多种结构的主体树脂，进行了大量的配方研究，筛选出了最佳配方．研制出的样品经美国SEMATECH实验室应用评价其最佳分辨率为0．1μm，最小曝光量为26mJ／cm^2，不但具有优异的分辨率和光敏性，而且还具有良好的粘附性和抗干法腐蚀性．     

陕北无定河流域土壤侵蚀与植被覆盖和降雨关系研究

基于2000—2014年陕北无定河流域日降水、DEM、土壤类型、MODIS NDVI等数据,利用修正通用土壤流失方程(RUSLE)估算了流域土壤侵蚀情况,定量分析了植被覆盖和降雨在土壤侵蚀中的作用,结果表明:(1)无定河流域土壤侵蚀以微度侵蚀为主,平均占流域面积的88.35%,各土壤侵蚀等级面积比例随等级的升高而降低。2000—2014年微度侵蚀面积比例为下降趋势,轻度及以上等级面积比例均为上升趋势。(2)不考虑降雨因子影响时,无定河流域仍以微度侵蚀为主,且为增加趋势,而其他土壤侵蚀等级均为下降趋势。不考虑植被覆盖因子时,流域土壤侵蚀与模型计算结果的变化趋势基本一致。(3)植被覆盖对土壤侵蚀面积比例和变化速率的贡献率分别为13.67%和24.55%,而降雨作用达到86.33%和75.44%,表明降雨是流域土壤侵蚀的主要动力和控制因子,降雨变化主导着流域土壤侵蚀变化过程。     

聚甲基丙烯酰氧乙基二甲基丁烷基溴化铵共振光散射法测定核酸

通过光谱法研究聚甲基丙烯酰氧乙基二甲基丁烷基溴化铵(PMDB)和核酸的作用。结果表明通过共振光散射法用PMDB检测微量的DNA可靠、准确和简单。     

浅析AC发泡剂生产的碱耗和省碱技术

本文概况了尿素法AC发泡剂的生产过程中中间产品的流失途径及副反应的产生原因对AC收得率(以碱计算)的影响以及省碱技术进行了分析.     

气相法改性纳米二氧化硅表面

采用硅烷偶联剂A-151处理的纳米二氧化硅粒子，具有良好的疏水性，并且反应副产物没有腐蚀性，有利于保护设备和环境保护。分别用表面羟基数、亲油化度等性能来表征改性纳米二氧化硅的效果。红外光谱分析表明A-151确实已经和纳米二氧化硅表明的羟基发生了化学反应，通过透射电镜研究发现改性后纳米二氧化硅在乙醇中达到纳米级的分散。     

An Attractive Synthetic Approach to Methyl Formate from Methanol via Methyl Nitrite

Catalytic synthesis of methyl formate has been investigated by a novel route starting from methyl nitrite in vapor phase. The acidic sites of the catalysts play a crucial role for the catalytic activity and the selectivity of formation of methyl formate. The H-Y zeolite catalyst gave higher yield and selectivity of the target product. This study provides a new approach for the synthesis of methyl formate from methanol via methyl nitrite.     

改性木粉/PVC复合材料的研究进展

概述了PVC木塑复合材料的发展和背景与性能。简述了木质材料的性质和木粉改性的方法,如物理方法和化学方法。介绍了木塑复合材料的生产流程、成型方法(模压成型、挤出成型、注射成型及其成型设备,讨论了对工艺参数的一些要求。指出目前国内PVC木塑复合材料发展存在的一些问题,并指明了PVC木塑复合材料的应用前景。