A deformable surface model for real-time water drop animation

A water drop behaves differently from a large water body because of its strong viscosity and surface tension under the small scale. Surface tension causes the motion of a water drop to be largely determined by its boundary surface. Meanwhile, viscosity makes the interior of a water drop less relevant to its motion, as the smooth velocity field can be well approximated by an interpolation of the velocity on the boundary. Consequently, we propose a fast deformable surface model to realistically animate water drops and their flowing behaviors on solid surfaces. Our system efficiently simulates water drop motions in a Lagrangian fashion, by reducing 3D fluid dynamics over the whole liquid volume to a deformable surface model. In each time step, the model uses an implicit mean curvature flow operator to produce surface tension effects, a contact angle operator to change droplet shapes on solid surfaces, and a set of mesh connectivity updates to handle topological changes and improve mesh quality over time. Our numerical experiments demonstrate a variety of physically plausible water drop phenomena at a real-time rate, including capillary waves when water drops collide, pinch-off of water jets, and droplets flowing over solid materials. The whole system performs orders-of-magnitude faster than existing simulation approaches that generate comparable water drop effects.     

Optimal Performance in Tracking Stochastic Signal Under Disturbance Rejection

The analysis method of optimal tracking performance is proposed for multiple‐input multiple‐output (MIMO) linear time‐invariant (LTI) systems under disturbance rejection. An H₂ criterion of the error signal between the output of the plant and the reference signal is used as a measure for the tracking performance. Spectral factorization is applied to obtain the optimal solution of the system tracking error. The explicit expressions are derived for this minimal tracking error with respect to random reference signals under disturbance rejection. It is shown that the nonminimum phase zeros, the zero direction, the unstable poles, the pole direction of a given plant, statistical characteristics of the reference input signal, and disturbance signal have a negative effect on a feedback system's ability to reduce the system error with disturbance rejection. The results show that the optimal tracking performance will further be damaged because of disturbance rejection. Some typical examples are given to illustrate the theoretical results.     

使用报表脚本实现报表续打套打

报表文件的续打套打是一个常见的需求,通过程序的参数设置和计算操控报表脚本从而实现规范的报表续打可以报表规范的续打。     

组态王和VB在远程定位中的应用

为了利用组态王6.53接收远程数据功能和VB(Visual Basic)对MapX控件进行二次开发功能,利用DDE(Dynamic Data Exchange)技术,实现了组态王6.53与VB通信,根据组态王通信使用的MODBUS协议格式和GPS(Global Positioning System)数据格式,来提取经纬度信息,以此控制动态图层中的图元,来而实现远程车辆的定位,同时也扩大了监控中心软件的功能。     

超重力对燃烧合成Ti（C，N）-TiB2复合粉体的影响

以Ti和B4C为起始反应物，分别在常规和超重力条件下通过燃烧合成技术制备出Ti（C,N）-TiB2复合粉体，利用XRD和SEM对燃烧产物进行了表征，研究了起始组成和超重力条件对燃烧产物相组成和微观形貌的影响。结果表明，燃烧产物主要由Ti（C，N）和TiB2组成，通过改变起始配方中Ti／B4C的摩尔比，可以调节产物中Ti（C，N）和TiB2的相对含量。超重力条件下，反应物颗粒接触更加充分，碰撞更加频繁，因而晶粒形态发育更加完整，生成规则的多面体。     

美国大学教学评估及其对中国高等教育的启示

美国大学和学院，学生对教师教学进行有效性评估。不同大学对教学有不同要求和标准；美国学术界对教学评估体系利与弊展开过辩论，而学生和老师的背景特征可能引起偏见。美国学生对老师进行教学评估的体系，对中国高等教育教学可能有一定的他石意义，但是，评估体系的现实条件有差异，中国不应当照抄或照搬美国教学评估，尤其应该摒弃将教与学关系扭曲为买方和卖方关系的观念。取其精华而弃其糟粕，建立适应中国的教学评估体系才能提高高等教育质量。     

Effect of supports on the redox performance of pyrite cinder in chemical looping combustion

Chemical looping combustion (CLC) is a clean and efficient flame-free combustion technology,which combust the fuels by lattice oxygen from a solid oxygen carrier with inherent CO2 capture.The develop-ment of oxygen carriers with low cost and high redox performance is crucial to the whole efficiency of CLC process.As the solid by-product from the sulfuric acid production,pyrite cinder presented excellent redox performance as an oxygen carrier in CLC process.The main components in pyrite cinder are Fe2O3,CaSO4,Al2O3 and SiO2 in which Fe2O3 is the active component to provide lattice oxygen.In order to sys-tematic investigate the functions of supports (CaSO4,Al2O3 and SiO2) in pyrite cinder,three oxygen car-riers (Fe2O3-CaSO4,Fe2O3-Al2O3 and Fe2O3-SiO2) were prepared and evaluated in this study.The results showed that Fe2O3-CaSO4 displayed high redox activity and cycling stability in the multiple redox cycles.However,both Fe2O3-Al2O3 and Fe2O3-SiO2 experienced serious deactivation during redox reactions.It indicated that the inert Fe-Si solid solution (Fe2SiO4) was formed in the spent Fe2O3-SiO2 sample,which decreased the oxygen carrying capacity of this sample.The XPS results showed that the oxygen species on the surface of Fe2O3-CaSO4 could be fully recovered after the 20 redox cycles.It can be concluded that CaSO4 is the key to the high redox activity and cycling stability of pyrite cinder.     

35kV变压器故障气相色谱分析

对于运行中的变压器,气相色谱分析法可实现其内部故障的诊断,并提供有效的运维建议.应用气相色谱分析法分析一起35 kV变压器故障,为气相色谱分析法的进一步推广应用提供有力的技术支撑.     

Low-Temperature Superplastic Deformation of Cold-Rolled Fe–5.6Mn–1.1Al–0.2C Steel

Metallurgical and Materials Transactions A - A cold-rolled low Al-added medium Mn steel was employed to investigate the low-temperature superplastic deformation at a relatively high initial strain...     

Ce对440C不锈轴承钢夹杂物演变的影响

为探究稀土Ce对440C不锈轴承钢中夹杂物的改性作用,利用实验室MoSi₂电阻炉对440C不锈轴承钢进行稀土Ce处理,采用OM、SEM等系统分析了Ce的添加对440C不锈轴承钢脱氧及夹杂物演变的影响。结果表明,随着Ce加入量的增加,其收得率逐渐升高。Ce的加入使钢中TO质量分数由0.002 5%降低至0.001 2%。未加入Ce的钢中夹杂物主要为Al₂O₃、MnS以及镁铝尖晶石;加入质量分数为0.011 5%的Ce后,夹杂物被改性为以Ce-Al-O为主的夹杂物;当Ce的添加量达到0.036 4%时,夹杂物被完全改性为Ce-O-S夹杂物。适量的Ce可以降低夹杂物尺寸及面积比例,但过量加入会使夹杂物尺寸变大。在本试验条件下,当Ce质量分数为0.011 5%时,钢中夹杂物细小弥散效果最明显。以上结论可为Ce在高碳铬不锈轴承钢中的应用提供参考。