Preparation and microwave absorbing properties of nickel-coated carbon fiber with polyaniline via in situ polymerization

Electric conductive and microwave absorbing material PANI/Ni/CF was prepared by in situ polymerization of polyaniline on the surface of nickel-coated carbon fiber (Ni/CF). The morphologies and structures of CF, Ni/CF, PANI and PANI/Ni/CF were characterized by scanning electron microscope and X-ray diffraction. Results show that the CF was wrapped tightly around the nickel layer, and the Ni/CF was coated by PANI. Measurement of four probes resistance tester indicates that the electrical conductivity of PANI/Ni/CF was great improved compared with PANI and PANI/CF. Vibrating sample magnetometry shows that the magnetic saturation intensity of Ni/CF and PANI/Ni/CF was 13.8 and 2.3 emu/g, respectively. According to the vector network analyzer, the microwave absorbing properties of PANI/Ni/CF were better than those of PANI and PANI/CF, and its minimum loss value is ?12.4 dB at 8.8 GHz.     

气相色谱仪新旧检定规程的解读

本文主要从规程适用范围、计量器具控制、计量性能要求及检定方法等方面入手,全面的解读了气相色谱仪新旧检定规程的差异,为仪器检定及期间核查提供了参考。     

Regulation of Polymer Configurations Enables Green Solvent-Processed Large-Area Binary All-Polymer Solar Cells With Breakthrough Performance and High Efficiency Stretchability Factor

With the great potential of the all-polymer solar cells for large-area wearable devices, both large-area device efficiency and mechanical flexibility are very critical but attract limited attention. In this work, from the perspective of the polymer configurations, two types of terpolymer acceptors PYTX-A and PYTX-B (X = Cl or H) are developed. The configuration difference caused by the replacement of non-conjugated units results in distinct photovoltaic performance and mechanical flexibility. Benefiting from a good match between the intrinsically slow film-forming of the active materials and the technically slow film-forming of the blade-coating process, the toluene-processed large-area (1.21 cm²) binary device achieves a record efficiency of 14.70%. More importantly, a new parameter of efficiency stretchability factor (ESF) is proposed for the first time to comprehensively evaluate the overall device performance. PM6:PYTCl-A and PM6:PYTCl-B yield significantly higher ESF than PM6:PY-IT. Further blending with non-conjugated polymer donor PM6-A, the best ESF of 3.12% is achieved for PM6-A:PYTCl-A, which is among the highest comprehensive performances.     

Implementation of pseudo-nondiffracting beams by use of diffractive phase elements

We report the experimental implementation of pseudo-nondiffracting beams by use of diffractive phase elements (DPE's). Based on the conjugate-gradient method presented in J. Opt. Soc. Am. A 15, 144-151 (1998), these DPE's are designed and fabricated on a flat quartz substrate. The experimental results show that the performance of the fabricated DPE's is in good agreement with the theoretical prediction.     

A network-based mobility management scheme for future Internet

The current Internet was originally designed for “fixed” terminals and can hardly support mobility. It is necessary to develop new mobility management schemes for the future Internet. This paper proposes an Identifiers Separating and Mapping Scheme (ISMS), which is a candidate for the future Internet mobility management, and discusses the basic principles and detailed message flow. ISMS is a network-based mobility management scheme that takes advantage of the identity and location separation. The mobility entities in the core network are responsible for the location management. ISMS is designed to satisfy the requirements of faster handover, route optimism, advanced management, location privacy and security. The average handover delay of ISMS is on the order of milliseconds only, which is far smaller than that of Mobile IPv6. Analyses show that ISMS can reduce packet overhead on wireless channels. We build a prototype and perform some experiments. Results verify the feasibility of ISMS.     

Embedding multi-dimensional meshes into twisted cubes

The twisted cube is an important variant of the most popular hypercube network for parallel processing. In this paper, we consider the problem of embedding multi-dimensional meshes into twisted cubes in a systematic way. We present a recursive method for embedding a family of disjoint multi-dimensional meshes into a twisted cube with dilation 1 and expansion 1. We also prove that a single multi-dimensional mesh can be embedded into a twisted cube with dilation 2 and expansion 1. Our work extends some previously known results.     

未雨绸缪 防患未然——“柔性测试”助力泛华测控提供高可靠性测试系统

<正>毋庸置疑,"可靠性"一直是评价电子产品性能的关键词之一,尤其在军工、航天等领域,产品的可靠性更是具有举足轻重的地位。一个细小器件的故障引发系统重大事故的案例屡见不鲜。随着人们对可靠性的重要性认识的不断提高,业内对可靠性理论及可靠性设计的研究也不断深入。12月2日,由中国电子     

The effect of the aspect ratio on the hydrophobicity of microstructured polydimethylsiloxane (PDMS) robust surfaces

In this study, we have designed and fabricated robust hydrophobic surfaces that are composed of various micropillar arrays and investigated the effect of the aspect ratio (feature height/feature size) of the micropillar on the wettability of the fabricated surfaces. The robust, micropillar-arrayed surfaces were designed to yield the same Wenzel and Cassie water contact angles (CAs). According to our design rule, one can achieve an enhanced hydrophobic surface by increasing the height of the micropillars. The designed hydrophobic surfaces were fabricated by polydimethylsiloxane (PDMS) replica molding with photolithographically micropatterned SU-8 masters. The hydrophobicity properties of the fabricated PDMS surfaces were fully characterized theoretically and experimentally. From the theoretical and experimental results, it was found that the micropillars of an intrinsically hydrophobic material with a high aspect ratio enhance the hydrophobicity of the surface by increasing the surface roughness (in view of the Wenzel state) and the opportunities for the entrapment of air beneath a water droplet (the Cassie state).