The low dielectric polymer films have drawn great attention to the application as the dielectric insulating materials in high-frequency circuit boards, while the weak adhesion to the copper foils and the poor processability resulted from the fluorinated or rigid structures limited their high-frequency application. In this work, the low dielectric and high adhesive polyimide/fluorinated ethylene propylene (PI/FEP) nanocomposite film for high-frequency flexible circuit board application is developed. It is indicated that the fluorocarbon surfactants can significantly improve the dispersion of FEP in PI substrate, and thus, the PI/FEP nanocomposite film exhibits excellent mechanical properties, including the tensile strength increases to 46.6 MPa and the elongation at the break increases to 13.7%. Importantly, at the high-frequency of 10 GHz, the 60 wt% FEP filled PI nanocomposite film displays an ultralow dielectric loss (0.006) and a reduced dielectric constant (2.69). In addition, the high-frequency flexible circuit board with the PI/FEP film as the dielectric insulating layer has a high peel strength of 0.75 N mm−1, indicating this PI/FEP nanocomposite film can meet the requirements of the high-frequency flexible circuit board application. 相似文献
In this study, a kind of imidazole type poly(ionic liquid) ([PEP-MIM]Cl) is synthesized, which can disperse carbon effectively. [PEP-MIM]Cl is used as an intermediate to coat carbon on the poly(acrylic acid)(PAA-co-MBA) via ion exchange to obtain conductive polymer composite (CPC). A series of characterizations are performed. Experiments show that carbon can be coated on the PAA-co-MBA uniformly, and compared with using carbon as filler, this method requires less carbon to achieve good conductive performance. The carbon layer on the polymer's surface is enriched via the swelling-shrinking properties of PAA-co-MBA according to the SEM images. Furthermore, in combination with 3D printing technology, PAA-co-MBA can be designed into different shapes to achieve various functions such as pressure-sensing element. Finally, a new type of CPC named carbon clad polymeric laminate (CCPL) is prepared by using the carbon coating method and 3D printing technology. It has the potential to replace copper clad laminate (CCL) and printed circuit board (PCB), to a certain extent. This technology expands the preparation method and application of the CPC such as flexible and wearable conductive fabrics. 相似文献
Comparative experiments are performed in friction stir welding (FSW) of dissimilar Al/Mg alloys with and without assistance of ultrasonic vibration. Metallographic characterization of the welds at transverse cross sections reveals that ultrasonic vibration induces differences in plastic material flow in two conditions. In FSW, the plastic material in the peripheral area of shoulder-affected zone (SAZ) tends to flow downward because of the weakening of the driving force of the shoulder, and a plastic material insulation layer is formed at the SAZ edge. When ultrasonic vibration is exerted, the stirred zone is divided into the inner and outer shear layers, the downward material flow trend of the inner shear layer disappears and tends to flow upward, and the onion-ring structure caused by the swirl motion is avoided in the pin-affected zone. By improving the flow behavior of plastic materials in the stirred zone, ultrasonic vibration reduces the heat generation, accelerates the heat dissipation in nugget zone and changes the thermal cycles, thus inhibiting the formation of intermetallic compound layers.
A new method for inner surface modification of steel tubes, named a combined technique of hot-dipping and plasma electrolytic oxidation (PEO) was proposed and demonstrated in this paper. In this work, metallurgically bonded ceramic coatings on inner surface of steel tubes were obtained using this method. In the combined process, aluminum coatings on steel were firstly prepared by the hot-dip process and then metallurgically bonded ceramic coatings were obtained on the aluminum coatings by PEO. The element distribution, phase composition and morphology of the aluminide layer and the ceramic coatings were characterized by SEM/EDX and XRD. The corrosion resistance of the ceramic coatings were also studied. The results show that, after hot-dip treatment, the coating layers consist of two layers, where Al, FexAl (1−x) were detected from external topcoat to the aluminide/steel substrate. Then after PEO process, uniform Al2O3 ceramic coatings have been deposited on inner surface of steel tubes. The ceramic coatings are mainly composed of -Al2O3 and γ-Al2O3 phase. The compound coatings show favorable corrosion resistance property. The investigations indicate that the combination of hot-dipping and plasma electrolytic oxidation proves a promising technique for inner surface modification of steel tubes for protective purposes. 相似文献
The corrosion behavior of 13Cr martensitic stainless steel in a CO2 environment in a stimulated oilfield was studied with potentiodynamic polarization and the impedance spectra technique. The
results showed that the microstructure of the surface scale clearly changed with temperature. This decreased the sensitivity
of pitting corrosion and increased the tendency toward general (or uniform) corrosion. The capacitance, the charge transfer
resistance, and the polarization resistance of the corrosion product scale decrease with increasing temperature from 90 to
120 °C, and thus the corrosion is a thermal activation controlled process. Charge transfer through the scale is difficult
and the corrosion is controlled by a diffusion process at a temperature of 150 °C. Resistance charge transfer through the
corrosion product layer is higher than that in the passive film. 相似文献
Summary: Wear behavior correlations with morphology have been established from polytetrafluoroethylene (PTFE) drawn at 200, 327, and 375 °C with draw ratio about 4. The friction coefficient and wear rate for PTFE drawn at 327 °C are lower and the wear rate is lower than that of undrawn PTFE by about 30%. The structures of samples were characterized by scanning electron microscope (SEM), DSC, and wide angle X‐ray diffraction (WAXD). Results indicate that the debris morphologies of samples are different. The differences in the tribological behavior of undrawn and drawn samples were attributed to the improvement of the degree of the crystalline, fibrillation, and orderliness by drawing, especially, for PTFE drawn at 327 °C. The orderliness of molecular arrangement along the drawn direction is also higher for PTFE drawn at 327 °C than those of PTFE drawn at 200 and 375 °C, respectively. Therefore, the intensity of covalent bond along drawn direction is higher. The shear resistance and the deformability of the material are greatly improved and the size of the wear breakage unit decreases, which results in a good tribological property for PTFE drawn at 327 °C.