Annealing Effect in GaDyN on Optical and Magnetic Properties

The annealing effect on the optical and magnetic properties of the GaDyN layers was studied. The PL intensities of yellow and green bands as well as the intra-4f orbital transition of Dy³⁺ ions were found to decrease for the samples annealed at 900 and 1000 °C. It is supposed that the intra-4f orbital transition is related to the broad peak luminescence coming from defects. Increasing the annealing temperature, the magnetization becomes smaller. It is considerable that the number of electrons coming from defects was reduced by the annealing treatments and that the ferromagnetism in GaDyN is attributed as carrier induced ferromagnetism.     

Development of lateral displacement sensor for real‐time detection of structural damage

We have developed a novel sensor that enables us to measure the relative story displacement of a building structure in real time. This lateral displacement sensor (LDS) is composed of a light‐emitting diode (LED) array, which is fixed on the ceiling, and a position‐sensitive detector (PSD) unit, which is placed on the floor. We optimized the LDS to achieve high accuracy in lateral displacement measurement. The accuracy was evaluated to be 60 µm by conducting shaking table tests. Two LDSs were implemented in an actual building equipped with an active variable stiffness (AVS) system, and the building was vibrated with seismic waveforms by an exciter placed on the rooftop. The seismic displacement of the second floor relative to the first floor was measured using the LDS. Furthermore, the inclination angle of the second floor could be measured using the LDS during the seismic vibration. Using the AVS system, we realized the residual displacement of the second floor without inducing damage to the building, and succeeded in real‐time residual displacement measurement for the first time. These results indicate that the LDS is useful for the health diagnosis of a building structure. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Application of citric acid as natural adhesive for wood

The development of natural adhesives derived from nonfossil resources is very important for the future. Besides, it is desirable to be safe adhesives without using harmful chemical substances. In this study, application of citric acid as a natural adhesive was investigated. Citric acid powder and bark powder obtained from Acacia mangium were used as raw materials. Citric acid powder was mixed with the bark powder, and the resulting powder mixture was poured into a metal mold. The mold was hot‐pressed at 180°C and 4 MPa for 10 min, and a bark molding was then obtained. The specific modulus of rupture and modulus of elasticity values of the molding containing 20 wt % citric acid were 18.1 MPa and 4.9 GPa, respectively. The molding did not decompose during a repeated boiling treatment. To clarify the effect of tannin on the adhesiveness of molding, bark was separated into tannin and residue. The molding was not obtained while using the tannin due to the marked fluidity, whereas it was obtained while using the residue, the same as while using the bark. It was considered that components other than tannin contributed to the adhesiveness. Based on the results of Fourier transform infrared spectra, the formation of ester linkages between carboxyl groups derived from citric acid and hydroxyl groups in the bark was confirmed. Accordingly, citric acid brought an adhesion by chemical bonding, and it could be used as a safe natural adhesive. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

TEM analysis of high temperature annealed W nanostructure surfaces

Helium plasma irradiation and electron heating experiments were conducted using tungsten in the divertor simulator NAGDIS-II. Helium plasma irradiation to tungsten led to the formation of nanostructures on the surface, while the nanostructures were annihilated after the potential of the specimen was changed to positive for several 10 min so that electrons irradiated the sample without ion irradiation. The specimens were analyzed in detail by transmission electron microscope with the help of focused ion beam technique. It is revealed that the helium nano-bubbles still remained even after the nanostructures were disappeared from the surface. Porosity of the nanostructured tungsten was measured from the TEM images.     

Analysis of electro‐optical properties of polymer‐stabilized OCB and the application to TFT‐LCDs

Abstract— A 9‐in. full‐color polymer‐stabilized OCB TFT‐LCD with stable bend alignment in the absence of an electric field was developed. The condition of the polymer stabilization, the characteristics of UV‐curable monomers, and their influence on the configurations of the polymer network in the cell were studied. Possible models of the configuration were proposed and their relationship to the electro‐optical properties was analyzed using a novel simulation method considering the distribution of anchoring effects from both alignment surfaces and the polymer network. It was suggested that a good performance such as high contrast ratio and fast response could be expected in the polymer network originating from newly developed monomers composed of multifunctional LC acrylates due to a relatively weak‐anchoring effect and presumably its localization near the alignment surfaces. By using the newly developed monomers under the optimized polymer‐stabilizing process, a high contrast ratio of 250:1 and fast response nearly equal to that of a conventional OCB cell were achieved.     

Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Magnetic Torque Measurements on Bi2201 Single Crystal in High Magnetic Fields

The magnetic field direction dependence of the magnetic torque in the superconducting state of Bi ₂ Sr _1.65 La _0.35 CuO ₆₊ (Bi2201) single crystal has been measured in several static magnetic fields up to 200 kOe. The applied field dependence of the anisotropy parameter, , defined by the square root of the effective mass ratio has been obtained by fitting the magnetic torque curves at 17 K by means of the effective mass model. For Bi ₂ Sr ₂ CaCu ₂ O ₈₊ (Bi2212), the values up to 210 kOe were reported previously. At each field, for Bi2201 is larger than that for Bi2212. Since the value decreases as the field increases both for Bi2201 and Bi2212, the reduction of by the application of the high magnetic field is considered to be common for Bi-based layered superconductors.     

Photoelectrochemical energy conversion system modeled on the photosynthetic process

Photo-excitable electrodes were prepared by incorporating magnesium chlorophyll (MgChl) or manganese chlorophyll (MnChl) into the thin layer of such liquid cyrstals as N-(p-methoxybenzylidene)-p-butylaniline (MBBA) and 4′-heptyl-4-cyanobiphenyl (HCB), being attached to the platinum surface. The MgChl—MBBA electrode gave the positive photo-induced potential shift in an acidic solution. In sharp contrast, the negative photo-induced potential shift was developed by the MnChl—HCB electrode in an alkaline solution. The involvement of a liquid crystal prominently enhanced the photo-response of the immobilized chlorophylls. The photoelectrochemical energy conversion system modeled on the photosynthetic process was assembled by employing the MgChl—MBBA and the MnChl—HCB electrodes as a cathode and an anode, respectively. The photocurrent derived from the system was concluded to result from the decomposition of water, since an evidence for the molecular oxygen evolution at the MnChl—HCB electrode was obtained. Furthermore, the incorporation of β-carotene was found to markedly enhance the stability of the MnChl—HCB electrode.     

Adsorption properties of amphiphilic polyoxyalkylenated dimethylpolysiloxane derivatives on keratin

Adsorption properties of two types of dimethylpolysiloxane backbone derivatives, perfluoroalkyl polyoxyethylenated dimethylpolysiloxane (FPD) and polyoxyethylenated dimethylpolysiloxane (PD), onto keratin surfaces were investigated. Both polymers are amphiphilic, since they possess hydrophilic polyoxyethylene groups. FPD contains a perfluoroalkyl group that provides both water-and oil-repellent properties, whereas PD lacks these groups. Adsorption properties of these polymers onto keratin surfaces are considered a good index to evaluate these compounds as nonionics used in hair-coating agents, since keratin is a major component of hair. FPD was more likely to be adsorbed and less likely to be eliminated from the keratin surface than PD. Once FPD had been adsorbed onto the keratin surface, it was very slowly washed from the surface when it was immersed in stationary water, whereas PD polymers were quickly washed from the keratin surface. Even in running water, rapid elimination of FPD was not observed. The strong resistance to loss of FPD after washing with a large quantity of water may be due to the water-repellent nature of the perfluoroalkyl groups. As a comparison, FPD adsorption onto a glass surface was also investigated. The affinity to the glass surface was found to be less than to the keratin surface.