Hydrogen production by combining two types of photosynthetic bacteria with different characteristics

The double-layer photobioreactor using two types of photosynthetic bacteria, Rhodobacter sphaeroides RV and its reduced-pigment mutant, MTP4, was developed for efficient hydrogen production. The two types of bacteria had different characteristics on light energy, hydrogen production rate and conversion efficiency. MTP4 produced hydrogen more efficiently under high light conditions and RV did so under low light conditions. Illuminated light toward the surface of a photobioreactor quasi-exponentially declines as it penetrates into the reactor. When two types of bacteria were placed using the developed reactor according to this light distribution, the hydrogen production rate reached 3.64 l/m²/h at a light intensity of 500 W/m² in 24 h and the conversion efficiency of light energy to hydrogen was 2.18%. These values were 33% higher than those of only using RV. The low light in the deep part of the reactor was utilized efficiently, resulting in a higher hydrogen production rate.     

The Emi2 Protein of Saccharomyces cerevisiae is a Hexokinase Expressed under Glucose Limitation

Hexokinases catalyze glucose phosphorylation at the first step in glycolysis in eukaryotes. In the budding yeast Saccharomyces cerevisiae , three enzymes for glucose phosphorylation have long been known: Hxk1, Hxk2, and Glk1. In this study, we focus on Emi2, a previously uncharacterized hexokinase-like protein of S. cerevisiae . Our data show that the recombinant Emi2 protein (rEmi2), expressed in Escherichia coli , possesses glucose-phosphorylating activity in the presence of ATP and Mg ²⁺ . It was also found that rEmi2 phosphorylates not only glucose but also fructose, mannose and glucosamine in vitro . In addition, we examined changes in the level of endogenous Emi2 protein in S. cerevisiae in the presence or absence of glucose and a non-fermentable carbon source. We found that the expression of Emi2 protein is tightly suppressed during proliferation in high glucose, while it is strongly upregulated in response to glucose limitation and the presence of a non-fermentable carbon source. Our data suggest that the expression of the endogenous Emi2 protein in S. cerevisiae is regulated under the control of Hxk2 in response to glucose availability in the environment.     

Surface wetting phenomena of plasma polymer-coated sheets of poly(l-lactic acid)/poly(butylene succinate)

Water-repellent surfaces were fabricated on blend sheets of poly(l-lactic acid)/poly(butylene succinate) with various blending ratios by the successive processing; (1) plasma etching, followed by (2) the hydrophobic plasma polymer coating. Rough morphology was formed effectively on the mosaic structured surface of blend sheets via the oxidative etching, and advanced water repellency was achieved after the thin membrane coating was synthesized with a hydrophobic plasma polymer coating by use of hexamethyldisiloxane or hexamethyldisilazane. High water repellency is expressed through the columnar hair-like structured model, where the air-water surface interaction in the voids is taken into account.     

Atomic force microscopy of histological sections using a new electron beam etching method

In order to examine histological sections of the rat vomeronasal epithelium with the atomic force microscope (AFM), we developed an electron beam etching method that improves the resolution of AFM images. This method results in AFM images comparable to those obtained with the transmission electron microscope (TEM). Ultrathin tissue sections embedded in epoxy resin were observed before and after the treatment with electron beam radiation. Before electron beam treatment, epithelial structures such as the microvilli surface, dendritic processes, the supporting cell layers and the neuronal cell layers were all visible using the AFM. However, only a few subcellular structures could also be resolved. The AFM images were not as clear as those obtained with the TEM. After electron beam treatment, however, the resolution of AFM images was greatly improved. Most of the subcellular structures observed in TEM images, including the inner membrane of mitochondria, ciliary-structure precursor body, junctional complexes between the neurons and supporting cells, and individual microvilli were now visible in the AFM images. The electron beam treatment appeared to melt the embedding resin, bringing subcellular structures into high relief. The result of this study suggests that electron beam etching of histological samples may provide a new method for the study of subcellular structure using the AFM.     

Contrasting diurnal variations in fossil and nonfossil secondary organic aerosol in urban outflow, Japan

Diurnal variations of fossil secondary organic carbon (SOC) and nonfossil SOC were determined for the first time using a combination of several carbonaceous aerosol measurement techniques, including radiocarbon (1?C) determinations by accelerator mass spectrometry, and a receptor model (chemical mass balance, CMB) at a site downwind of Tokyo during the summer of 2007. Fossil SOC showed distinct diurnal variation with a maximum during daytime, whereas diurnal variation of nonfossil SOC was relatively small. This behavior was reproduced by a chemical transport model (CTM). However, the CTM underestimated the concentration of anthropogenic secondary organic aerosol (ASOA) by a factor of 4-7, suggesting that ASOA enhancement during daytime is not explained by production from volatile organic compounds that are traditionally considered major ASOA precursors. This result suggests that unidentified semivolatile organic compounds or multiphase chemistry may contribute largely to ASOA production. As our knowledge of production pathways of secondary organic aerosol (SOA) is still limited, diurnal variations of fossil and nonfossil SOC in our estimate give an important experimental constraint for future development of SOA models.     

Accumulation and elimination profiles of paralytic shellfish poison in the short-necked clam Tapes japonica fed with the toxic dinoflagellate Gymnodinium catenatum

The paralytic shellfish poison (PSP)-producing dinoflagellate Gymnodinium catenatum (Gc) was fed to the short-necked clam Tapes japonica, and the accumulation, transformation and elimination profiles of PSP were investigated by means of high-performance liquid chromatography with postcolumn fluorescence derivatization (HPLC-FLD). The short-necked clams ingested most of the Gc cells (4 x 10(6) cells) supplied as a bolus at the beginning of the experiment, and accumulated a maximal amount of toxin (181 nmol/10 clams) after 12 hr. The rate of toxin accumulation at that time was 16%, which rapidly decreased thereafter. During the rearing period, a variation in toxin composition, derived presumably from the transformation of toxin analogues in the clams, was observed, including a reversal of the ratio of C2 to C1, and the appearance of carbamate (gonyautoxin (GTX) 2, 3) and decarbamoyl (dc) derivatives (decarbamoylsaxitoxin (dcSTX) and dcGTX2, 3), which were undetectable in Gc cells. The total amount of toxin contained in clams and residue (remaining Gc cells and/or excrement in the rearing tank) gradually declined, and only about 1% of the supplied toxin was detected at the end of the experiment.     

Enhancement of melt elasticity for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by addition of weak gel

Rheological properties in a molten state are studied extensively for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), PHB‐HV, with a small amount of crosslinked poly(epichlorohydrin), PECH, having low density of crosslink points. It is found that adding 2 wt % of xPECH greatly enhances the melt elasticity of PHB‐HV, one of the serious defects of microbial PHB, whereas it has no effect on the shear viscosity. As a result, viscoelastic nature, and thus processability, of PHB‐HV can be controlled by blending the crosslinked PECH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Photoelectric properties of ABA‐type triblock copolymers designed using fluorine‐containing polyimide macroinitiators with polyhedral oligomeric silsesquioxane

4,4′‐(Hexafluoro‐isopropylidene) diphthalic anhydride‐2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (6FDA‐TeMPD) was synthesized and reacted with polyhedral oligomeric silsesquioxane (POSS) to form an ABA‐type triblock copolymer by atom transfer radical polymerization. The solid‐state and optical properties of the resulting copolymers were systematically investigated, and their electronic states were analyzed. As the POSS concentration increased, the transparency across the entire wavelength range increased. In the ABA‐type triblock copolymers, a new transition was observed between the highest occupied molecular orbital in POSS and the lowest unoccupied molecular orbital in 6FDA‐TeMPD because of their high molecular size dispersion. Since the refractive index of 6FDA‐TeMPD decreased linearly as the POSS concentration increased, the refractive index of the ABA‐type triblock copolymers of 6FDA‐TeMPD with POSS could be easily controlled. POLYM. ENG. SCI., 57:1207–1213, 2017. © 2017 Society of Plastics Engineers     

Surface Analysis of Cr2O3‐, CoO‐, and Al2O3‐Doped Iron–Phosphate Glasses at High Temperature

Surface structures of iron–phosphate glasses were examined using X‐ray photoelectron spectroscopy (XPS). Cr₂O₃, CoO, and Al₂O₃ were introduced to the glass by the replacement of a part of Fe₂O₃, and the simulated fission products are also added. The obtained glasses showed high chemical durabilities by MCC‐1 test. In situ high‐temperature and room‐temperature XPS measurements were conducted on the polished sample surfaces and also those after 1‐week chemical durability test. Unique trends were observed in XPS spectra on heating and after the chemical durability test, respectively. Nature of the glass surface of iron–phosphate glasses was explained from the point of view of surface energy, and the origin of high chemical durability and the effect of chromium ions were discussed based on the changes on surface composition and valence states of transition‐metal ions.